Message-ID: <CAMSo37V3U5nYng77jzSnKH73CTLhGYQJu11Q5wRt289se5nFJw@mail.gmail.com>
Date:   Sun, 14 Aug 2022 22:27:27 +0800
From:   Yongqin Liu <yongqin.liu@...aro.org>
To:     Ivaylo Dimitrov <ivo.g.dimitrov.75@...il.com>
Cc:     Tomi Valkeinen <tomi.valkeinen@...asonboard.com>, tomba@...nel.org,
        airlied@...ux.ie, daniel@...ll.ch, dri-devel@...ts.freedesktop.org,
        linux-kernel@...r.kernel.org, linux-omap@...r.kernel.org,
        merlijn@...zup.org, tony@...mide.com,
        "Bajjuri, Praneeth" <praneeth@...com>,
        Sumit Semwal <sumit.semwal@...aro.org>
Subject: Re: [PATCH 3/3] drm: omapdrm: Do no allocate non-scanout GEMs through DMM/TILER

Hi, IvayIo

Thanks very much for the reply!

On Sat, 13 Aug 2022 at 14:58, Ivaylo Dimitrov
<ivo.g.dimitrov.75@...il.com> wrote:
>
> Hi Liu,
>
> On 12.08.22 г. 7:35 ч., Yongqin Liu wrote:
> > Hi, Ivaylo, Tomi
> >
> > We have one X15 Android AOSP master build, it could not have the home
> > screen displayed
> > on the hdmi monitor connected with this change, with the following
> > message printed on the serial console
> >      [  607.404205] omapdrm omapdrm.0: Failed to setup plane plane-0
> >      [  607.410522] omapdrm omapdrm.0: Failed to setup plane plane-1
> >      [  607.416381] omapdrm omapdrm.0: Failed to setup plane plane-2
> >      [  607.422088] omapdrm omapdrm.0: Failed to setup plane plane-3
> >
> >     # for details, please check the link here: http://ix.io/47m1
> >
> > It will work with home screen displayed on the hdmi monitor if this
> > change is reverted.
> >
> > Is this the broken problem you talked about here?
> >
> > And could you please give some suggestions on how to have the x15
> > Android build work with this change?
> >
>
> Make sure scanout (i.e. those to be displayed) buffers are actually
> allocated as such - OMAP_BO_SCANOUT flag must be set when calling
> omap_bo_new().

I am not familiar with this area, I am sorry if I asked quite silly questions:(
I googled omap_bo_new, and found it's a function of libdrm here[1], is
it what you meant here?

If it's the omap_bo_new that we should pass OMAP_BO_SCANOUT when it is called,
then is it the correct way to update omap_bo_new to add the OMAP_BO_SCANOUT flag
before it calls omap_bo_new_impl?

And another question is that, since the userspace(libdrm) will be used
to work with different kernel versions,
like the old 4.14, 4.19, etc, do you think there will be problem to
pass  OMAP_BO_SCANOUT
from the userspace side with the old kernels(which does not have this change)?
does this change need to be backported to the old kernel versions?

And the last question is that, omap_bo_new might be called by some
property binaries what not everyone
could get the source to update, for such case what's your suggestions?

[1]: https://gitlab.freedesktop.org/mesa/drm/-/blob/main/omap/omap_drm.c#L227

Thanks,
Yongqin Liu
> > On Thu, 17 Feb 2022 at 23:29, Ivaylo Dimitrov
> > <ivo.g.dimitrov.75@...il.com> wrote:
> >>
> >>
> >>
> >> On 17.02.22 г. 14:46 ч., Tomi Valkeinen wrote:
> >>> Hi,
> >>>
> >>> On 19/01/2022 12:23, Ivaylo Dimitrov wrote:
> >>>> On devices with DMM, all allocations are done through either DMM or
> >>>> TILER.
> >>>> DMM/TILER being a limited resource means that such allocations will start
> >>>> to fail before actual free memory is exhausted. What is even worse is
> >>>> that
> >>>> with time DMM/TILER space gets fragmented to the point that even if we
> >>>> have
> >>>> enough free DMM/TILER space and free memory, allocation fails because
> >>>> there
> >>>> is no big enough free block in DMM/TILER space.
> >>>>
> >>>> Such failures can be easily observed with OMAP xorg DDX, for example -
> >>>> starting few GUI applications (so buffers for their windows are
> >>>> allocated)
> >>>> and then rotating landscape<->portrait while closing and opening new
> >>>> windows soon results in allocation failures.
> >>>>
> >>>> Fix that by mapping buffers through DMM/TILER only when really needed,
> >>>> like, for scanout buffers.
> >>>
> >>> Doesn't this break users that get a buffer from omapdrm and expect it to
> >>> be contiguous?
> >>>
> >>
> >> If you mean dumb buffer, then no, this does not break users as dumb
> >> buffers are allocated as scanout:
> >>
> >> https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/omapdrm/omap_gem.c#L603
> >>
> >> If you mean omap_bo allocated buffers, then if users want
> >> linear(scanout) buffer, then they request it explicitly by passing
> >> OMAP_BO_SCANOUT.
> >>
> >> Ivo
> >
> >
> >



-- 
Best Regards,
Yongqin Liu
---------------------------------------------------------------
#mailing list
linaro-android@...ts.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-android

Powered by blists - more mailing lists