| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220814203530.GA640885-robh@kernel.org>
Date: Sun, 14 Aug 2022 14:35:30 -0600
From: Rob Herring <robh@...nel.org>
To: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
Cc: linux-remoteproc@...r.kernel.org, agross@...nel.org,
bjorn.andersson@...aro.org, lgirdwood@...il.com,
broonie@...nel.org, quic_plai@...cinc.com, bgoswami@...cinc.com,
perex@...ex.cz, tiwai@...e.com, srinivas.kandagatla@...aro.org,
quic_rohkumar@...cinc.com, linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org, swboyd@...omium.org,
judyhsiao@...omium.org, devicetree@...r.kernel.org
Subject: Re: [PATCH v4 1/7] dt-bindings: remoteproc: qcom: Add SC7280 ADSP
support
On Fri, Aug 12, 2022 at 06:17:40PM +0530, Srinivasa Rao Mandadapu wrote:
> Add ADSP PIL loading support for SC7280 SoCs.
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
> ---
> .../bindings/remoteproc/qcom,sc7280-adsp-pil.yaml | 189 +++++++++++++++++++++
> 1 file changed, 189 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
> new file mode 100644
> index 0000000..e656cc8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
> @@ -0,0 +1,189 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-adsp-pil.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SC7280 ADSP Peripheral Image Loader
> +
> +maintainers:
> + - Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
> +
> +description:
> + This document defines the binding for a component that loads and boots firmware
> + on the Qualcomm Technology Inc. ADSP.
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,sc7280-adsp-pil
> +
> + reg:
> + minItems: 1
> + items:
> + - description: qdsp6ss register
> + - description: efuse q6ss register
> +
> + interrupts:
> + items:
> + - description: Watchdog interrupt
> + - description: Fatal interrupt
> + - description: Ready interrupt
> + - description: Handover interrupt
> + - description: Stop acknowledge interrupt
> + - description: Shutdown acknowledge interrupt
> +
> + interrupt-names:
> + items:
> + - const: wdog
> + - const: fatal
> + - const: ready
> + - const: handover
> + - const: stop-ack
> + - const: shutdown-ack
> +
> + clocks:
> + items:
> + - description: XO clock
> + - description: GCC CFG NOC LPASS clock
> + - description: LPASS AHBS AON clock
> + - description: LPASS AHBM AON clock
> + - description: QDSP XO clock
> + - description: Q6SP6SS SLEEP clock
> + - description: Q6SP6SS CORE clock
> +
> + clock-names:
> + items:
> + - const: xo
> + - const: gcc_cfg_noc_lpass
> + - const: lpass_ahbs_aon_cbcr
> + - const: lpass_ahbm_aon_cbcr
> + - const: qdsp6ss_xo
> + - const: qdsp6ss_sleep
> + - const: qdsp6ss_core
> +
> + power-domains:
> + items:
> + - description: LCX power domain
> +
> + resets:
> + items:
> + - description: PDC AUDIO SYNC RESET
> + - description: CC LPASS restart
> +
> + reset-names:
> + items:
> + - const: pdc_sync
> + - const: cc_lpass
> +
> + memory-region:
> + maxItems: 1
> + description: Reference to the reserved-memory for the Hexagon core
> +
> + qcom,adsp-memory-regions:
> + $ref: /schemas/types.yaml#/definitions/uint32-matrix
> + description:
> + Each entry consists of 4 integers and represents the
> + list of memory regions accessed by ADSP firmware.
> + items:
> + items:
> + - description: |
> + "iova reg" indicates the address of virtual memory region.
> + - description: |
> + "physical reg" indicates the address of phyical memory region.
> + - description: |
> + "size" indicates the offset memory region.
> + - description: |
> + "access level" indicates the read, read and write access levels.
> + minimum: 0
> + maximum: 1
> +
> + qcom,halt-regs:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description:
> + Phandle reference to a syscon representing TCSR followed by the
> + three offsets within syscon for q6, modem and nc halt registers.
items:
- items:
- description: phandle to TCSR
- description: offset to q6 halt registers
- ...
> +
> + qcom,smem-states:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: States used by the AP to signal the Hexagon core
> + items:
> + - description: Stop the modem
> +
> + qcom,smem-state-names:
> + $ref: /schemas/types.yaml#/definitions/string
> + description: The names of the state bits used for SMP2P output
> + items:
> + - const: stop
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-names
> + - clocks
> + - clock-names
> + - power-domains
> + - resets
> + - reset-names
> + - qcom,halt-regs
> + - memory-region
> + - qcom,smem-states
> + - qcom,smem-state-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,rpmh.h>
> + #include <dt-bindings/clock/qcom,gcc-sc7280.h>
> + #include <dt-bindings/clock/qcom,lpass-sc7280.h>
> + #include <dt-bindings/reset/qcom,sdm845-aoss.h>
> + #include <dt-bindings/reset/qcom,sdm845-pdc.h>
> + #include <dt-bindings/power/qcom-rpmpd.h>
> +
> + remoteproc@...0000 {
> + compatible = "qcom,sc7280-adsp-pil";
> + reg = <0x03000000 0x5000>,
> + <0x355B000 0x10>;
> +
> + interrupts-extended = <&pdc 162 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> +
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack", "shutdown-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_CFG_NOC_LPASS_CLK>,
> + <&lpasscc LPASS_Q6SS_AHBM_CLK>,
> + <&lpasscc LPASS_Q6SS_AHBS_CLK>,
> + <&lpasscc LPASS_QDSP6SS_XO_CLK>,
> + <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
> + <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
> + clock-names = "xo", "gcc_cfg_noc_lpass",
> + "lpass_ahbs_aon_cbcr",
> + "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
> + "qdsp6ss_sleep", "qdsp6ss_core";
> +
> + power-domains = <&rpmhpd SC7280_LCX>;
> +
> + resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
> + <&aoss_reset AOSS_CC_LPASS_RESTART>;
> + reset-names = "pdc_sync", "cc_lpass";
> +
> + qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>;
> +
> + memory-region = <&adsp_mem>;
> +
> + qcom,smem-states = <&adsp_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + qcom,adsp-memory-regions = <0x00100000 0x00100000 0x4000 0>,
> + <0x00113000 0x00113000 0x1000 0>,
> + <0x00117000 0x00117000 0x2000 1>;
> + };
> --
> 2.7.4
>
>
Powered by blists - more mailing lists