[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220815180433.195876501@linuxfoundation.org>
Date: Mon, 15 Aug 2022 19:51:28 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org,
Amit Kumar Mahapatra <amit.kumar-mahapatra@...inx.com>,
Miquel Raynal <miquel.raynal@...tlin.com>
Subject: [PATCH 5.18 0089/1095] mtd: rawnand: arasan: Update NAND bus clock instead of system clock
From: Amit Kumar Mahapatra <amit.kumar-mahapatra@...inx.com>
commit 7499bfeedb47efc1ee4dc793b92c610d46e6d6a6 upstream.
In current implementation the Arasan NAND driver is updating the
system clock(i.e., anand->clk) in accordance to the timing modes
(i.e., SDR or NVDDR). But as per the Arasan NAND controller spec the
flash clock or the NAND bus clock(i.e., nfc->bus_clk), need to be
updated instead. This patch keeps the system clock unchanged and updates
the NAND bus clock as per the timing modes.
Fixes: 197b88fecc50 ("mtd: rawnand: arasan: Add new Arasan NAND controller")
CC: stable@...r.kernel.org # 5.8+
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@...inx.com>
Signed-off-by: Miquel Raynal <miquel.raynal@...tlin.com>
Link: https://lore.kernel.org/linux-mtd/20220628154824.12222-2-amit.kumar-mahapatra@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/mtd/nand/raw/arasan-nand-controller.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/mtd/nand/raw/arasan-nand-controller.c
+++ b/drivers/mtd/nand/raw/arasan-nand-controller.c
@@ -347,17 +347,17 @@ static int anfc_select_target(struct nan
/* Update clock frequency */
if (nfc->cur_clk != anand->clk) {
- clk_disable_unprepare(nfc->controller_clk);
- ret = clk_set_rate(nfc->controller_clk, anand->clk);
+ clk_disable_unprepare(nfc->bus_clk);
+ ret = clk_set_rate(nfc->bus_clk, anand->clk);
if (ret) {
dev_err(nfc->dev, "Failed to change clock rate\n");
return ret;
}
- ret = clk_prepare_enable(nfc->controller_clk);
+ ret = clk_prepare_enable(nfc->bus_clk);
if (ret) {
dev_err(nfc->dev,
- "Failed to re-enable the controller clock\n");
+ "Failed to re-enable the bus clock\n");
return ret;
}
Powered by blists - more mailing lists