[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220815180451.920275250@linuxfoundation.org>
Date: Mon, 15 Aug 2022 19:59:00 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Ralph Siemsen <ralph.siemsen@...aro.org>,
Phil Edworthy <phil.edworthy@...esas.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.18 0541/1095] clk: renesas: r9a06g032: Fix UART clkgrp bitsel
From: Ralph Siemsen <ralph.siemsen@...aro.org>
[ Upstream commit 2dee50ab9e72a3cae75b65e5934c8dd3e9bf01bc ]
There are two UART clock groups, each having a mux to select its
upstream clock source. The register/bit definitions for accessing these
two muxes appear to have been reversed since introduction. Correct them
so as to match the hardware manual.
Fixes: 4c3d88526eba ("clk: renesas: Renesas R9A06G032 clock driver")
Signed-off-by: Ralph Siemsen <ralph.siemsen@...aro.org>
Reviewed-by: Phil Edworthy <phil.edworthy@...esas.com>
Link: https://lore.kernel.org/r/20220518182527.1693156-1-ralph.siemsen@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/clk/renesas/r9a06g032-clocks.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c
index c99942f0e4d4..abc0891fd96d 100644
--- a/drivers/clk/renesas/r9a06g032-clocks.c
+++ b/drivers/clk/renesas/r9a06g032-clocks.c
@@ -286,8 +286,8 @@ static const struct r9a06g032_clkdesc r9a06g032_clocks[] = {
.name = "uart_group_012",
.type = K_BITSEL,
.source = 1 + R9A06G032_DIV_UART,
- /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG1_PR2 */
- .dual.sel = ((0xec / 4) << 5) | 24,
+ /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG0_0 */
+ .dual.sel = ((0x34 / 4) << 5) | 30,
.dual.group = 0,
},
{
@@ -295,8 +295,8 @@ static const struct r9a06g032_clkdesc r9a06g032_clocks[] = {
.name = "uart_group_34567",
.type = K_BITSEL,
.source = 1 + R9A06G032_DIV_P2_PG,
- /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG0_0 */
- .dual.sel = ((0x34 / 4) << 5) | 30,
+ /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG1_PR2 */
+ .dual.sel = ((0xec / 4) << 5) | 24,
.dual.group = 1,
},
D_UGATE(CLK_UART0, "clk_uart0", UART_GROUP_012, 0, 0, 0x1b2, 0x1b3, 0x1b4, 0x1b5),
--
2.35.1
Powered by blists - more mailing lists