linux-kernel - [PATCH v3 0/8] arm64: dts: imx8mm-kontron: Improvements and OSM board support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 15 Aug 2022 13:01:23 +0200
From:   Frieder Schrempf <frieder@...s.de>
To:     devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, Li Yang <leoyang.li@....com>,
        Shawn Guo <shawnguo@...nel.org>
Cc:     Frieder Schrempf <frieder.schrempf@...tron.de>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>
Subject: [PATCH v3 0/8] arm64: dts: imx8mm-kontron: Improvements and OSM board support

From: Frieder Schrempf <frieder.schrempf@...tron.de>

This set contains a few improvements for the imx8mm-kontron devicetrees
(patch 3-7) and support for a new SoM (patch 8, including baseboard) that
complies to the Open Standard Module (OSM) 1.0 hardware specification, size S
(https://sget.org/standards/osm).

It also includes binding changes in patch 1 and 2.

Changes in v3:
* drop patch for 2 which was applied separately
* rebase on v6.0-rc1
* rename compatibles and file names

Changes in v2:
* move binding changes to beginning of patchset
* Allow arbitrary regulator names in PCA9450 bindings
* Use voltage rail names from schematic for PMIC regulator-names
* Add SPI NOR partition layout to devicetree
* Remove unneeded header include
* Add tags

Frieder Schrempf (8):
  dt-bindings: arm: fsl: Rename compatibles for Kontron i.MX8MM
    SoM/board
  dt-bindings: arm: fsl: Add Kontron BL i.MX8MM OSM-S board
  arm64: dts: imx8mm-kontron: Adjust compatibles, file names and model
    strings
  arm64: dts: imx8mm-kontron: Use the VSELECT signal to switch SD card
    IO voltage
  arm64: dts: imx8mm-kontron: Remove low DDRC operating point
  arm64: dts: imx8mm-kontron: Use voltage rail names from schematic for
    PMIC regulator-names
  arm64: dts: imx8mm-kontron: Add SPI NOR partition layout
  arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S

 .../devicetree/bindings/arm/fsl.yaml          |  13 +-
 arch/arm64/boot/dts/freescale/Makefile        |   3 +-
 .../dts/freescale/imx8mm-kontron-bl-osm-s.dts | 376 ++++++++++++++++++
 ...tron-n801x-s.dts => imx8mm-kontron-bl.dts} |   7 +-
 .../dts/freescale/imx8mm-kontron-osm-s.dtsi   | 330 +++++++++++++++
 ...-n801x-som.dtsi => imx8mm-kontron-sl.dtsi} |  53 ++-
 6 files changed, 757 insertions(+), 25 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
 rename arch/arm64/boot/dts/freescale/{imx8mm-kontron-n801x-s.dts => imx8mm-kontron-bl.dts} (96%)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
 rename arch/arm64/boot/dts/freescale/{imx8mm-kontron-n801x-som.dtsi => imx8mm-kontron-sl.dtsi} (87%)

-- 
2.37.1