Message-ID: <87sflycjat.fsf@yhuang6-desk2.ccr.corp.intel.com>
Date:   Mon, 15 Aug 2022 10:49:46 +0800
From:   "Huang, Ying" <ying.huang@...el.com>
To:     "Aneesh Kumar K.V" <aneesh.kumar@...ux.ibm.com>
Cc:     linux-mm@...ck.org, akpm@...ux-foundation.org,
        Wei Xu <weixugc@...gle.com>, Yang Shi <shy828301@...il.com>,
        Davidlohr Bueso <dave@...olabs.net>,
        Tim C Chen <tim.c.chen@...el.com>,
        Michal Hocko <mhocko@...nel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Hesham Almatary <hesham.almatary@...wei.com>,
        Dave Hansen <dave.hansen@...el.com>,
        Jonathan Cameron <Jonathan.Cameron@...wei.com>,
        Alistair Popple <apopple@...dia.com>,
        Dan Williams <dan.j.williams@...el.com>,
        Johannes Weiner <hannes@...xchg.org>, jvgediya.oss@...il.com,
        Bharata B Rao <bharata@....com>
Subject: Re: [PATCH v14 00/10] mm/demotion: Memory tiers and demotion

"Aneesh Kumar K.V" <aneesh.kumar@...ux.ibm.com> writes:

> The current kernel has the basic memory tiering support: Inactive pages on a
> higher tier NUMA node can be migrated (demoted) to a lower tier NUMA node to
> make room for new allocations on the higher tier NUMA node. Frequently accessed
> pages on a lower tier NUMA node can be migrated (promoted) to a higher tier NUMA
> node to improve the performance.
>
> In the current kernel, memory tiers are defined implicitly via a demotion path
> relationship between NUMA nodes, which is created during the kernel
> initialization and updated when a NUMA node is hot-added or hot-removed. The
> current implementation puts all nodes with CPU into the highest tier, and builds the
> tier hierarchy tier-by-tier by establishing the per-node demotion targets based
> on the distances between nodes.
>
> This current memory tier kernel implementation needs to be improved for several
> important use cases:
>
> * The current tier initialization code always initializes each memory-only NUMA
>   node into a lower tier. But a memory-only NUMA node may have a high
>   performance memory device (e.g. a DRAM-backed memory-only node on a virtual
>   machine) and that should be put into a higher tier.
>
> * The current tier hierarchy always puts CPU nodes into the top tier. But on a
>   system with HBM (e.g. GPU memory) devices, these memory-only HBM NUMA nodes
>   should be in the top tier, and DRAM nodes with CPUs are better to be placed
>   into the next lower tier.
>
> * Also because the current tier hierarchy always puts CPU nodes into the top
>   tier, when a CPU is hot-added (or hot-removed) and triggers a memory node from
>   CPU-less into a CPU node (or vice versa), the memory tier hierarchy gets
>   changed, even though no memory node is added or removed. This can make the
>   tier hierarchy unstable and make it difficult to support tier-based memory
>   accounting.
>
> * A higher tier node can only be demoted to nodes with shortest distance on the
>   next lower tier as defined by the demotion path, not any other node from any
>   lower tier. This strict, demotion order does not work in all use
>   cases (e.g. some use cases may want to allow cross-socket demotion to another
>   node in the same demotion tier as a fallback when the preferred demotion node
>   is out of space), and has resulted in the feature request for an interface to
>   override the system-wide, per-node demotion order from the userspace. This
>   demotion order is also inconsistent with the page allocation fallback order
>   when all the nodes in a higher tier are out of space: The page allocation can
>   fall back to any node from any lower tier, whereas the demotion order doesn't
>   allow that.
>
> This patch series make the creation of memory tiers explicit under
> the control of device driver.
>
> Memory Tier Initialization
> ==========================
>
> Linux kernel presents memory devices as NUMA nodes and each memory device is of
> a specific type. The memory type of a device is represented by its abstract 
> distance. A memory tier corresponds to a range of abstract distance. This allows
> for classifying memory devices with a specific performance range into a memory
> tier.
>
> By default, all memory nodes are assigned to the default tier with
> abstract distance 512.
>
> A device driver can move its memory nodes from the default tier. For example,
> PMEM can move its memory nodes below the default tier, whereas GPU can move its
> memory nodes above the default tier.
>
> The kernel initialization code makes the decision on which exact tier a memory
> node should be assigned to based on the requests from the device drivers as well
> as the memory device hardware information provided by the firmware.
>
> Hot-adding/removing CPUs doesn't affect memory tier hierarchy.
>
> Changes from v13
> * Address review feedback.
> * Add path dropping memtier from struct memory_dev_type
>
> Changes from v12
> * Fix kernel crash on module unload
> * Address review feedback.
> * Add node_random patch to this series based on review feedback
>
> Changes from v11:
> * smaller abstract distance imply faster(higher) memory tier.
>
> Changes from v10:
> * rename performance level to abstract distance
> * Thanks to all the good feedback from Huang, Ying <ying.huang@...el.com>.
>   Updated the patchset to cover most of the review feedback.
>
> Changes from v9:
> * Use performance level for initializing memory tiers.
>
> Changes from v8:
> * Drop the sysfs interface patches and  related documentation changes.
>
> Changes from v7:
> * Fix kernel crash with demotion.
> * Improve documentation.
>
> Changes from v6:
> * Drop the usage of rank.
> * Address other review feedback.
>
> Changes from v5:
> * Remove patch supporting N_MEMORY node removal from memory tiers. memory tiers
>   are going to be used for features other than demotion. Hence keep all N_MEMORY
>   nodes in memory tiers irrespective of whether they want to participate in promotion or demotion.
> * Add NODE_DATA->memtier
> * Rearrage patches to add sysfs files later.
> * Add support to create memory tiers from userspace.
> * Address other review feedback.
>
>
> Changes from v4:
> * Address review feedback.
> * Reverse the meaning of "rank": higher rank value means higher tier.
> * Add "/sys/devices/system/memtier/default_tier".
> * Add node_is_toptier
>
> v4:
> Add support for explicit memory tiers and ranks.
>
> v3:
> - Modify patch 1 subject to make it more specific
> - Remove /sys/kernel/mm/numa/demotion_targets interface, use
>   /sys/devices/system/node/demotion_targets instead and make
>   it writable to override node_states[N_DEMOTION_TARGETS].
> - Add support to view per node demotion targets via sysfs
>
> v2:
> In v1, only 1st patch of this patch series was sent, which was
> implemented to avoid some of the limitations on the demotion
> target sharing, however for certain numa topology, the demotion
> targets found by that patch was not most optimal, so 1st patch
> in this series is modified according to suggestions from Huang
> and Baolin. Different examples of demotion list comparasion
> between existing implementation and changed implementation can
> be found in the commit message of 1st patch.
>
>
>
> Aneesh Kumar K.V (9):
>   mm/demotion: Add support for explicit memory tiers
>   mm/demotion: Move memory demotion related code
>   mm/demotion: Add hotplug callbacks to handle new numa node onlined
>   mm/demotion/dax/kmem: Set node's abstract distance to
>     MEMTIER_DEFAULT_DAX_ADISTANCE
>   mm/demotion: Build demotion targets based on explicit memory tiers
>   mm/demotion: Add pg_data_t member to track node memory tier details
>   mm/demotion: Drop memtier from memtype
>   mm/demotion: Update node_is_toptier to work with memory tiers
>   lib/nodemask: Optimize node_random for nodemask with single NUMA node
>
> Jagdish Gediya (1):
>   mm/demotion: Demote pages according to allocation fallback order
>
>  drivers/dax/kmem.c           |  42 ++-
>  include/linux/memory-tiers.h |  99 ++++++
>  include/linux/migrate.h      |  15 -
>  include/linux/mmzone.h       |   3 +
>  include/linux/node.h         |   5 -
>  include/linux/nodemask.h     |  15 +-
>  mm/Makefile                  |   1 +
>  mm/huge_memory.c             |   1 +
>  mm/memory-tiers.c            | 645 +++++++++++++++++++++++++++++++++++
>  mm/migrate.c                 | 453 +-----------------------
>  mm/mprotect.c                |   1 +
>  mm/vmscan.c                  |  59 +++-
>  mm/vmstat.c                  |   4 -
>  13 files changed, 846 insertions(+), 497 deletions(-)
>  create mode 100644 include/linux/memory-tiers.h
>  create mode 100644 mm/memory-tiers.c

Except some minor comments, the series looks good to me.  Thanks!  Feel
free to add

Reviewed-by: "Huang, Ying" <ying.huang@...el.com>

for the whole series.

Best Regards,
Huang, Ying

Powered by blists - more mailing lists