[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220816060139.111934-4-s-vadapalli@ti.com>
Date: Tue, 16 Aug 2022 11:31:39 +0530
From: Siddharth Vadapalli <s-vadapalli@...com>
To: <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <linux@...linux.org.uk>,
<vladimir.oltean@....com>, <grygorii.strashko@...com>,
<vigneshr@...com>, <nsekhar@...com>
CC: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <kishon@...com>,
<s-vadapalli@...com>
Subject: [PATCH v4 3/3] net: ethernet: ti: am65-cpsw: Move phy_set_mode_ext() to correct location
In TI's J7200 SoC CPSW5G ports, each of the 4 ports can be configured
as a QSGMII main or QSGMII-SUB port. This configuration is performed
by phy-gmii-sel driver on invoking the phy_set_mode_ext() function.
It is necessary for the QSGMII main port to be configured before any of
the QSGMII-SUB interfaces are brought up. Currently, the QSGMII-SUB
interfaces come up before the QSGMII main port is configured.
Fix this by moving the call to phy_set_mode_ext() from
am65_cpsw_nuss_ndo_slave_open() to am65_cpsw_nuss_init_slave_ports(),
thereby ensuring that the QSGMII main port is configured before any of
the QSGMII-SUB ports are brought up.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com>
---
drivers/net/ethernet/ti/am65-cpsw-nuss.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
index 033b40649308..7ef5d8208a4e 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
@@ -593,11 +593,6 @@ static int am65_cpsw_nuss_ndo_slave_open(struct net_device *ndev)
/* mac_sl should be configured via phy-link interface */
am65_cpsw_sl_ctl_reset(port);
- ret = phy_set_mode_ext(port->slave.ifphy, PHY_MODE_ETHERNET,
- port->slave.phy_if);
- if (ret)
- goto error_cleanup;
-
ret = phylink_of_phy_connect(port->slave.phylink, port->slave.phy_node, 0);
if (ret)
goto error_cleanup;
@@ -1898,6 +1893,10 @@ static int am65_cpsw_nuss_init_slave_ports(struct am65_cpsw_common *common)
goto of_node_put;
}
+ ret = phy_set_mode_ext(port->slave.ifphy, PHY_MODE_ETHERNET, port->slave.phy_if);
+ if (ret)
+ goto of_node_put;
+
ret = of_get_mac_address(port_np, port->slave.mac_addr);
if (ret) {
am65_cpsw_am654_get_efuse_macid(port_np,
--
2.25.1
Powered by blists - more mailing lists