linux-kernel - [RFC PATCH 3/6] firmware: arm

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 16 Aug 2022 08:24:47 +0100
From:   Cristian Marussi <cristian.marussi@....com>
To:     linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc:     sudeep.holla@....com, james.quinlan@...adcom.com,
        Jonathan.Cameron@...wei.com, f.fainelli@...il.com,
        etienne.carriere@...aro.org, vincent.guittot@...aro.org,
        souvik.chakravarty@....com, wleavitt@...vell.com,
        peter.hilber@...nsynergy.com, nicola.mazzucato@....com,
        tarek.el-sherbiny@....com, cristian.marussi@....com
Subject: [RFC PATCH 3/6] firmware: arm_scmi: Add xfer raw helpers

Add a few SCMI helpers useful to implement SCMI Raw access support.

Signed-off-by: Cristian Marussi <cristian.marussi@....com>
---
 drivers/firmware/arm_scmi/common.h |  7 +++
 drivers/firmware/arm_scmi/driver.c | 79 ++++++++++++++++++++++++++++++
 2 files changed, 86 insertions(+)

diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index bbaac20544a5..3316bf9eb98a 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -214,6 +214,13 @@ struct scmi_desc {
 	const bool atomic_enabled;
 };
 
+void scmi_xfer_raw_put(const struct scmi_handle *handle,
+		       struct scmi_xfer *xfer);
+struct scmi_xfer *scmi_xfer_raw_get(const struct scmi_handle *handle);
+
+int scmi_xfer_raw_inflight_register(const struct scmi_handle *handle,
+				    struct scmi_xfer *xfer);
+
 #ifdef CONFIG_ARM_SCMI_TRANSPORT_MAILBOX
 extern const struct scmi_desc scmi_mailbox_desc;
 #endif
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index e5193da2ce09..797826237776 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -350,6 +350,53 @@ scmi_xfer_inflight_register_unlocked(struct scmi_xfer *xfer,
 	xfer->pending = true;
 }
 
+/**
+ * scmi_xfer_inflight_register  - Try to register an xfer as in-flight
+ *
+ * @xfer: The xfer to register
+ * @minfo: Pointer to Tx/Rx Message management info based on channel type
+ *
+ * Note that this helper does NOT assume anything about the sequence number
+ * that was baked into the provided xfer, so it checks at first if it can
+ * be mapped to a free slot and fails with an error if another xfer with the
+ * same sequence number is currently still registered as in-flight.
+ *
+ * Return: 0 on Success or -EBUSY if sequence number embedded in the xfer
+ *	   could not rbe mapped to a free slot in the xfer_alloc_table.
+ */
+static int scmi_xfer_inflight_register(struct scmi_xfer *xfer,
+				       struct scmi_xfers_info *minfo)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&minfo->xfer_lock, flags);
+	if (!test_bit(xfer->hdr.seq, minfo->xfer_alloc_table))
+		scmi_xfer_inflight_register_unlocked(xfer, minfo);
+	else
+		ret = -EBUSY;
+	spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+
+	return ret;
+}
+
+/**
+ * scmi_xfer_raw_inflight_register  - An helper to register the given xfer as in
+ * flight on the TX channe, if possible.
+ *
+ * @handle: Pointer to SCMI entity handle
+ * @xfer: The xfer to register
+ *
+ * Return: 0 on Success, error otherwise
+ */
+int scmi_xfer_raw_inflight_register(const struct scmi_handle *handle,
+				    struct scmi_xfer *xfer)
+{
+	struct scmi_info *info = handle_to_scmi_info(handle);
+
+	return scmi_xfer_inflight_register(xfer, &info->tx_minfo);
+}
+
 /**
  * scmi_xfer_pending_set  - Pick a proper sequence number and mark the xfer
  * as pending in-flight
@@ -425,6 +472,22 @@ static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle,
 	return xfer;
 }
 
+/**
+ * scmi_xfer_raw_get  - Helper to get a bare free xfer from the TX channel
+ *
+ * @handle: Pointer to SCMI entity handle
+ *
+ * Note that xfer is taken from the TX channel structures.
+ *
+ * Return: A valid xfer on Success, or an error-pointer otherwise
+ */
+struct scmi_xfer *scmi_xfer_raw_get(const struct scmi_handle *handle)
+{
+	struct scmi_info *info = handle_to_scmi_info(handle);
+
+	return scmi_xfer_get(handle, &info->tx_minfo);
+}
+
 /**
  * __scmi_xfer_put() - Release a message
  *
@@ -453,6 +516,22 @@ __scmi_xfer_put(struct scmi_xfers_info *minfo, struct scmi_xfer *xfer)
 	spin_unlock_irqrestore(&minfo->xfer_lock, flags);
 }
 
+/**
+ * scmi_xfer_raw_put  - Release an xfer that was taken by @scmi_xfer_raw_get
+ *
+ * @handle: Pointer to SCMI entity handle
+ * @xfer: A reference to the xfer to put
+ *
+ * Note that as with other xfer_put() handlers the xfer is really effectively
+ * released only if there are no more users on the system.
+ */
+void scmi_xfer_raw_put(const struct scmi_handle *handle, struct scmi_xfer *xfer)
+{
+	struct scmi_info *info = handle_to_scmi_info(handle);
+
+	return __scmi_xfer_put(&info->tx_minfo, xfer);
+}
+
 /**
  * scmi_xfer_lookup_unlocked  -  Helper to lookup an xfer_id
  *
-- 
2.32.0