linux-kernel - Re: [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <0730c493-b49f-02f5-c0e7-999d5871dc4a@baylibre.com>
Date:   Tue, 16 Aug 2022 10:11:35 +0200
From:   Julien Panis <jpanis@...libre.com>
To:     William Breathitt Gray <william.gray@...aro.org>
Cc:     vilhelm.gray@...il.com, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, linux-iio@...r.kernel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        mranostay@...com
Subject: Re: [PATCH v4 3/3] counter: capture-tiecap: capture driver support
 for ECAP



On 15/08/2022 13:20, William Breathitt Gray wrote:
> On Sun, Aug 14, 2022 at 01:03:48PM -0400, William Breathitt Gray wrote:
>> On Wed, Aug 10, 2022 at 04:07:24PM +0200, Julien Panis wrote:
>>> +static int ecap_cnt_function_read(struct counter_device *counter,
>>> +				  struct counter_count *count,
>>> +				  enum counter_function *function)
>>> +{
>>> +	*function = COUNTER_FUNCTION_INCREASE;
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int ecap_cnt_action_read(struct counter_device *counter,
>>> +				struct counter_count *count,
>>> +				struct counter_synapse *synapse,
>>> +				enum counter_synapse_action *action)
>>> +{
>>> +	*action = COUNTER_SYNAPSE_ACTION_BOTH_EDGES;
>>> +
>>> +	return 0;
>>> +}
>> Right now you have a Signal defined for the ECAPSIG line, but there is
>> at least one more relevant Signal to define: the clock updating ECAPCNT.
>> The Synapse action of COUNTER_SYNAPSE_ACTION_BOTH_EDGES is for that
>> clock Signal, but for the ECAPSIG Signal you will need to report a
>> Synapse action based on the polarity of the next capture (i.e. whether
>> high or low).
> I need to make a correction here. IIUC, the ECAPSIG signal doesn't
> affect the count value of ECAPCNT (ECAPSIG only triggers the captures),
> so the Synapse action for ECAPSIG should always be
> COUNTER_SYNAPSE_ACTION_NONE. You don't need to account for the capture
> polarities because they're not relevant in this particular situation:
> ECAPSIG doesn't trigger the ECAPCNT count function.
>
> William Breathitt Gray

It appears to me that you spoke about TSCNT register content (32 bits). 
So, you were
not talking about the Mod4 counter (2 bits).
Do you confirm that ?