linux-kernel - [PATCH 10/16] hwmon: (mr75203) add VM pre-scalar support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220816082757.11990-11-farbere@amazon.com>
Date:   Tue, 16 Aug 2022 08:27:51 +0000
From:   Eliav Farber <farbere@...zon.com>
To:     <jdelvare@...e.com>, <linux@...ck-us.net>, <robh+dt@...nel.org>,
        <mark.rutland@....com>, <linux-hwmon@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC:     <farbere@...zon.com>, <talel@...zon.com>, <hhhawa@...zon.com>,
        <jonnyc@...zon.com>, <hanochu@...zon.com>, <ronenk@...zon.com>,
        <itamark@...zon.com>, <shellykz@...zon.com>, <shorer@...zon.com>,
        <amitlavi@...zon.com>, <almogbs@...zon.com>, <dwmw@...zon.co.uk>,
        <rtanwar@...linear.com>
Subject: [PATCH 10/16] hwmon: (mr75203) add VM pre-scalar support

Add pre-scalar support to normalzie the voltage output results for
channels the use pre-scalar units to get the measurement to be within
the range that the sensor supports.
The pre-scalar value is used if it exists in device-tree, otherwise
default value of 1 is used.

Signed-off-by: Eliav Farber <farbere@...zon.com>
---
 drivers/hwmon/mr75203.c | 28 ++++++++++++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
index 9b45fd089fcf..417b135c1b3f 100644
--- a/drivers/hwmon/mr75203.c
+++ b/drivers/hwmon/mr75203.c
@@ -110,8 +110,12 @@
 struct voltage_device {
 	u8 vm_map;
 	u8 ch_map;
+	u32 pre_scaler;
 };
 
+#define PRE_SCALR_PROPERTY_NAME	32
+#define PRE_SCALR_DEFAULT_VAL	1
+
 struct pvt_device {
 	struct regmap		*c_map;
 	struct regmap		*t_map;
@@ -213,7 +217,9 @@ static int pvt_read_in(struct device *dev, u32 attr, int channel, long *val)
 
 		n &= SAMPLE_DATA_MSK;
 		/* Convert the N bitstream count into voltage */
-		*val = (PVT_N_CONST * n - PVT_R_CONST) >> PVT_CONV_BITS;
+		*val = pvt->vd[channel].pre_scaler;
+		*val *= (PVT_N_CONST * n - PVT_R_CONST);
+		*val >>= PVT_CONV_BITS;
 
 		return 0;
 	default:
@@ -525,6 +531,7 @@ static int pvt_reset_control_deassert(struct device *dev, struct pvt_device *pvt
 static int mr75203_probe(struct platform_device *pdev)
 {
 	const struct hwmon_channel_info **pvt_info;
+	const struct device_node *np = pdev->dev.of_node;
 	u32 ts_num, vm_num, pd_num, ch_num, val, index, i, j, k;
 	struct device *dev = &pdev->dev;
 	u32 *temp_config, *in_config;
@@ -550,7 +557,7 @@ static int mr75203_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	if (of_property_read_bool(dev->of_node, "reset-control-skip")) {
+	if (of_property_read_bool(np, "reset-control-skip")) {
 		dev_info(dev, "skipping reset-control\n");
 	} else {
 		pvt->rst = devm_reset_control_get_exclusive(dev, NULL);
@@ -613,6 +620,8 @@ static int mr75203_probe(struct platform_device *pdev)
 	if (vm_num) {
 		u8 vm_idx[vm_num];
 		u8 vm_active_ch[vm_num];
+		char prop_name[PRE_SCALR_PROPERTY_NAME] = {0};
+		u32 pre_scaler;
 
 		ret = pvt_get_regmap(pdev, "vm", pvt);
 		if (ret)
@@ -684,6 +693,21 @@ static int mr75203_probe(struct platform_device *pdev)
 				k++;
 			}
 
+		/*
+		 * Incase vm-pre-scalar-ch# property is not defined, we assume
+		 * default pre-scaler of 1.
+		 */
+		for (i = 0; i < pvt->vm_ch_total; i++) {
+			snprintf(prop_name, sizeof(prop_name),
+				 "vm-pre-scalar-ch%u", i);
+
+			ret = of_property_read_u32(np, prop_name, &pre_scaler);
+			if (ret)
+				pvt->vd[i].pre_scaler = PRE_SCALR_DEFAULT_VAL;
+			else
+				pvt->vd[i].pre_scaler = pre_scaler;
+		}
+
 		in_config = devm_kcalloc(dev, pvt->vm_ch_total + 1,
 					 sizeof(*in_config), GFP_KERNEL);
 		if (!in_config)
-- 
2.37.1