| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220816161344.2599908-2-patrice.chotard@foss.st.com>
Date: Tue, 16 Aug 2022 18:13:43 +0200
From: <patrice.chotard@...s.st.com>
To: Mark Brown <broonie@...nel.org>,
Alexandre Torgue <alexandre.torgue@...s.st.com>
CC: <linux-spi@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <christophe.kerello@...s.st.com>,
<patrice.chotard@...s.st.com>
Subject: [PATCH v3 1/2] ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi
From: Patrice Chotard <patrice.chotard@...s.st.com>
Create a separate pinmux for qspi chip select in stm32mp15-pinctrl.dtsi.
In the case we want to use transfer_one() API to communicate with a SPI
device, chip select signal must be driven individually.
Signed-off-by: Patrice Chotard <patrice.chotard@...s.st.com>
---
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 50 ++++++++++++++++--------
arch/arm/boot/dts/stm32mp157c-ev1.dts | 12 +++++-
2 files changed, 43 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 6052243ad81c..ade4fab45f14 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1189,7 +1189,7 @@ pins {
};
qspi_bk1_pins_a: qspi-bk1-0 {
- pins1 {
+ pins {
pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
<STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
<STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
@@ -1198,12 +1198,6 @@ pins1 {
drive-push-pull;
slew-rate = <1>;
};
- pins2 {
- pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
- bias-pull-up;
- drive-push-pull;
- slew-rate = <1>;
- };
};
qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
@@ -1211,13 +1205,12 @@ pins {
pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
<STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
<STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
- <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
- <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+ <STM32_PINMUX('F', 6, ANALOG)>; /* QSPI_BK1_IO3 */
};
};
qspi_bk2_pins_a: qspi-bk2-0 {
- pins1 {
+ pins {
pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
<STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
<STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
@@ -1226,7 +1219,34 @@ pins1 {
drive-push-pull;
slew-rate = <1>;
};
- pins2 {
+ };
+
+ qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
+ <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
+ <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
+ <STM32_PINMUX('G', 7, ANALOG)>; /* QSPI_BK2_IO3 */
+ };
+ };
+
+ qspi_cs1_pins_a: qspi-cs1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ qspi_cs1_sleep_pins_a: qspi-cs1-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+ };
+ };
+
+ qspi_cs2_pins_a: qspi-cs2-0 {
+ pins {
pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
bias-pull-up;
drive-push-pull;
@@ -1234,13 +1254,9 @@ pins2 {
};
};
- qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+ qspi_cs2_sleep_pins_a: qspi-cs2-sleep-0 {
pins {
- pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
- <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
- <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
- <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
- <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
+ pinmux = <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
};
};
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index d142dd30e16b..050c3c27a420 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -255,8 +255,16 @@ &m_can1 {
&qspi {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
- pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
+ pinctrl-0 = <&qspi_clk_pins_a
+ &qspi_bk1_pins_a
+ &qspi_cs1_pins_a
+ &qspi_bk2_pins_a
+ &qspi_cs2_pins_a>;
+ pinctrl-1 = <&qspi_clk_sleep_pins_a
+ &qspi_bk1_sleep_pins_a
+ &qspi_cs1_sleep_pins_a
+ &qspi_bk2_sleep_pins_a
+ &qspi_cs2_sleep_pins_a>;
reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
#address-cells = <1>;
#size-cells = <0>;
--
2.25.1
Powered by blists - more mailing lists