[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220815180509.964648701@linuxfoundation.org>
Date: Mon, 15 Aug 2022 20:01:58 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Nikita Travkin <nikita@...n.ru>,
Stephen Boyd <sboyd@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.19 0762/1157] clk: qcom: clk-rcg2: Make sure to not write d=0 to the NMD register
From: Nikita Travkin <nikita@...n.ru>
[ Upstream commit d0696770cef35a1fd16ea2167e2198c18aa6fbfe ]
Sometimes calculation of d value may result in 0 because of the
rounding after integer division. This causes the following error:
[ 113.969689] camss_gp1_clk_src: rcg didn't update its configuration.
[ 113.969754] WARNING: CPU: 3 PID: 35 at drivers/clk/qcom/clk-rcg2.c:122 update_config+0xc8/0xdc
Make sure that D value is never zero.
Fixes: 7f891faf596e ("clk: qcom: clk-rcg2: Add support for duty-cycle for RCG")
Signed-off-by: Nikita Travkin <nikita@...n.ru>
Reviewed-by: Stephen Boyd <sboyd@...nel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Link: https://lore.kernel.org/r/20220612145955.385787-3-nikita@trvn.ru
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/clk/qcom/clk-rcg2.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index 2375e8122012..28019edd2a50 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -13,6 +13,7 @@
#include <linux/rational.h>
#include <linux/regmap.h>
#include <linux/math64.h>
+#include <linux/minmax.h>
#include <linux/slab.h>
#include <asm/div64.h>
@@ -461,9 +462,11 @@ static int clk_rcg2_set_duty_cycle(struct clk_hw *hw, struct clk_duty *duty)
/* Calculate 2d value */
d = DIV_ROUND_CLOSEST(n * duty_per * 2, 100);
- /* Check bit widths of 2d. If D is too big reduce duty cycle. */
- if (d > mask)
- d = mask;
+ /*
+ * Check bit widths of 2d. If D is too big reduce duty cycle.
+ * Also make sure it is never zero.
+ */
+ d = clamp_val(d, 1, mask);
if ((d / 2) > (n - m))
d = (n - m) * 2;
--
2.35.1
Powered by blists - more mailing lists