lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220817230036.817-3-pali@kernel.org>
Date:   Thu, 18 Aug 2022 01:00:34 +0200
From:   Pali Rohár <pali@...nel.org>
To:     Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Krzysztof Wilczyński <kw@...ux.com>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Rob Herring <robh+dt@...nel.org>, Andrew Lunn <andrew@...n.ch>,
        Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
        Gregory Clement <gregory.clement@...tlin.com>,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Cc:     linux-pci@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: [PATCH 2/4] PCI: mvebu: Implement support for interrupts on emulated bridge

This adds support for PME and ERR interrupts reported by emulated bridge
(for PME and AER kernel drivers) via new Root Port irq chip as these
interrupts from PCIe Root Ports are handled by mvebu hardware completely
separately from INTx and MSI interrupts send by real PCIe devices.

With this change, kernel PME and AER drivers start working as they can
acquire required interrupt lines (provided by mvebu rp virtual irq chip).

Note that for this support, device tree files has to be properly adjusted
to provide "interrupts" or "interrupts-extended" property with error
interrupt source and "interrupt-names" property with "error" string.

If device tree files do not provide these properties then driver would work
as before and would not provide interrupts on emulated bridge, like before.

Signed-off-by: Pali Rohár <pali@...nel.org>
---
 drivers/pci/controller/pci-mvebu.c | 256 ++++++++++++++++++++++++++---
 1 file changed, 237 insertions(+), 19 deletions(-)

diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index 54ce5d43b695..e69bdaa8de43 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -56,8 +56,16 @@
 #define PCIE_CONF_DATA_OFF	0x18fc
 #define PCIE_INT_CAUSE_OFF	0x1900
 #define PCIE_INT_UNMASK_OFF	0x1910
+#define  PCIE_INT_DET_COR		BIT(8)
+#define  PCIE_INT_DET_NONFATAL		BIT(9)
+#define  PCIE_INT_DET_FATAL		BIT(10)
+#define  PCIE_INT_ERR_FATAL		BIT(16)
+#define  PCIE_INT_ERR_NONFATAL		BIT(17)
+#define  PCIE_INT_ERR_COR		BIT(18)
 #define  PCIE_INT_INTX(i)		BIT(24+i)
 #define  PCIE_INT_PM_PME		BIT(28)
+#define  PCIE_INT_DET_MASK		(PCIE_INT_DET_COR | PCIE_INT_DET_NONFATAL | PCIE_INT_DET_FATAL)
+#define  PCIE_INT_ERR_MASK		(PCIE_INT_ERR_FATAL | PCIE_INT_ERR_NONFATAL | PCIE_INT_ERR_COR)
 #define  PCIE_INT_ALL_MASK		GENMASK(31, 0)
 #define PCIE_CTRL_OFF		0x1a00
 #define  PCIE_CTRL_X1_MODE		0x0001
@@ -120,9 +128,12 @@ struct mvebu_pcie_port {
 	struct resource regs;
 	u8 slot_power_limit_value;
 	u8 slot_power_limit_scale;
+	struct irq_domain *rp_irq_domain;
 	struct irq_domain *intx_irq_domain;
 	raw_spinlock_t irq_lock;
+	int error_irq;
 	int intx_irq;
+	bool pme_pending;
 };
 
 static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
@@ -321,9 +332,19 @@ static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
 	/* Clear all interrupt causes. */
 	mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_CAUSE_OFF);
 
-	/* Check if "intx" interrupt was specified in DT. */
-	if (port->intx_irq > 0)
-		return;
+	/*
+	 * Unmask all error interrupts which are internally generated.
+	 * They cannot be disabled by SERR# Enable bit in PCI Command register,
+	 * see Figure 6-3: Pseudo Logic Diagram for Error Message Controls in
+	 * PCIe base specification.
+	 * Internally generated mvebu interrupts are reported via mvebu summary
+	 * interrupt which requires "error" interrupt to be specified in DT.
+	 */
+	if (port->error_irq > 0) {
+		unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
+		unmask |= PCIE_INT_DET_MASK;
+		mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF);
+	}
 
 	/*
 	 * Fallback code when "intx" interrupt was not specified in DT:
@@ -335,10 +356,12 @@ static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
 	 * performance penalty as every PCIe interrupt handler needs to be
 	 * called when some interrupt is triggered.
 	 */
-	unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
-	unmask |= PCIE_INT_INTX(0) | PCIE_INT_INTX(1) |
-		  PCIE_INT_INTX(2) | PCIE_INT_INTX(3);
-	mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF);
+	if (port->intx_irq <= 0) {
+		unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
+		unmask |= PCIE_INT_INTX(0) | PCIE_INT_INTX(1) |
+			  PCIE_INT_INTX(2) | PCIE_INT_INTX(3);
+		mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF);
+	}
 }
 
 static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie,
@@ -603,11 +626,16 @@ mvebu_pci_bridge_emul_base_conf_read(struct pci_bridge_emul *bridge,
 	case PCI_INTERRUPT_LINE: {
 		/*
 		 * From the whole 32bit register we support reading from HW only
-		 * one bit: PCI_BRIDGE_CTL_BUS_RESET.
+		 * two bits: PCI_BRIDGE_CTL_BUS_RESET and PCI_BRIDGE_CTL_SERR.
 		 * Other bits are retrieved only from emulated config buffer.
 		 */
 		__le32 *cfgspace = (__le32 *)&bridge->conf;
 		u32 val = le32_to_cpu(cfgspace[PCI_INTERRUPT_LINE / 4]);
+		if ((mvebu_readl(port, PCIE_INT_UNMASK_OFF) &
+		      PCIE_INT_ERR_MASK) == PCIE_INT_ERR_MASK)
+			val |= PCI_BRIDGE_CTL_SERR << 16;
+		else
+			val &= ~(PCI_BRIDGE_CTL_SERR << 16);
 		if (mvebu_readl(port, PCIE_CTRL_OFF) & PCIE_CTRL_MASTER_HOT_RESET)
 			val |= PCI_BRIDGE_CTL_BUS_RESET << 16;
 		else
@@ -675,6 +703,11 @@ mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
 		break;
 	}
 
+	case PCI_EXP_RTCTL:
+		*value = (mvebu_readl(port, PCIE_INT_UNMASK_OFF) &
+			  PCIE_INT_PM_PME) ? PCI_EXP_RTCTL_PMEIE : 0;
+		break;
+
 	case PCI_EXP_RTSTA:
 		*value = mvebu_readl(port, PCIE_RC_RTSTA);
 		break;
@@ -780,6 +813,14 @@ mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
 		break;
 
 	case PCI_INTERRUPT_LINE:
+		if ((mask & (PCI_BRIDGE_CTL_SERR << 16)) && port->error_irq > 0) {
+			u32 unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
+			if (new & (PCI_BRIDGE_CTL_SERR << 16))
+				unmask |= PCIE_INT_ERR_MASK;
+			else
+				unmask &= ~PCIE_INT_ERR_MASK;
+			mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF);
+		}
 		if (mask & (PCI_BRIDGE_CTL_BUS_RESET << 16)) {
 			u32 ctrl = mvebu_readl(port, PCIE_CTRL_OFF);
 			if (new & (PCI_BRIDGE_CTL_BUS_RESET << 16))
@@ -838,10 +879,25 @@ mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
 		 * PME Status bit in Root Status Register (PCIE_RC_RTSTA)
 		 * is read-only and can be cleared only by writing 0b to the
 		 * Interrupt Cause RW0C register (PCIE_INT_CAUSE_OFF). So
-		 * clear PME via Interrupt Cause.
+		 * clear PME via Interrupt Cause and also set port->pme_pending
+		 * variable to false value to start processing PME interrupts
+		 * in interrupt handler again.
 		 */
-		if (new & PCI_EXP_RTSTA_PME)
+		if (new & PCI_EXP_RTSTA_PME) {
 			mvebu_writel(port, ~PCIE_INT_PM_PME, PCIE_INT_CAUSE_OFF);
+			port->pme_pending = false;
+		}
+		break;
+
+	case PCI_EXP_RTCTL:
+		if ((mask & PCI_EXP_RTCTL_PMEIE) && port->error_irq > 0) {
+			u32 unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
+			if (new & PCI_EXP_RTCTL_PMEIE)
+				unmask |= PCIE_INT_PM_PME;
+			else
+				unmask &= ~PCIE_INT_PM_PME;
+			mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF);
+		}
 		break;
 
 	case PCI_EXP_DEVCTL2:
@@ -924,6 +980,14 @@ static int mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port)
 		bridge_flags |= PCI_BRIDGE_EMUL_NO_IO_FORWARD;
 	}
 
+	/*
+	 * Interrupts on emulated bridge are supported only when "error"
+	 * interrupt was specified in DT. Without it emulated bridge cannot
+	 * emulate interrupts.
+	 */
+	if (port->error_irq > 0)
+		bridge->conf.intpin = PCI_INTERRUPT_INTA;
+
 	/*
 	 * Older mvebu hardware provides PCIe Capability structure only in
 	 * version 1. New hardware provides it in version 2.
@@ -1072,6 +1136,26 @@ static const struct irq_domain_ops mvebu_pcie_intx_irq_domain_ops = {
 	.xlate = irq_domain_xlate_onecell,
 };
 
+static struct irq_chip rp_irq_chip = {
+	.name = "mvebu-rp",
+};
+
+static int mvebu_pcie_rp_irq_map(struct irq_domain *h,
+				   unsigned int virq, irq_hw_number_t hwirq)
+{
+	struct mvebu_pcie_port *port = h->host_data;
+
+	irq_set_chip_and_handler(virq, &rp_irq_chip, handle_simple_irq);
+	irq_set_chip_data(virq, port);
+
+	return 0;
+}
+
+static const struct irq_domain_ops mvebu_pcie_rp_irq_domain_ops = {
+	.map = mvebu_pcie_rp_irq_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
 static int mvebu_pcie_init_irq_domain(struct mvebu_pcie_port *port)
 {
 	struct device *dev = &port->pcie->pdev->dev;
@@ -1094,10 +1178,72 @@ static int mvebu_pcie_init_irq_domain(struct mvebu_pcie_port *port)
 		return -ENOMEM;
 	}
 
+	/*
+	 * When "error" interrupt was not specified in DT then there is no
+	 * support for interrupts on emulated root bridge. So skip following
+	 * initialization.
+	 */
+	if (port->error_irq <= 0)
+		return 0;
+
+	port->rp_irq_domain = irq_domain_add_linear(NULL, 1,
+						      &mvebu_pcie_rp_irq_domain_ops,
+						      port);
+	if (!port->rp_irq_domain) {
+		irq_domain_remove(port->intx_irq_domain);
+		dev_err(dev, "Failed to add Root Port IRQ domain for %s\n", port->name);
+		return -ENOMEM;
+	}
+
 	return 0;
 }
 
-static irqreturn_t mvebu_pcie_irq_handler(int irq, void *arg)
+static irqreturn_t mvebu_pcie_error_irq_handler(int irq, void *arg)
+{
+	struct mvebu_pcie_port *port = arg;
+	struct device *dev = &port->pcie->pdev->dev;
+	u32 cause, unmask, status;
+
+	cause = mvebu_readl(port, PCIE_INT_CAUSE_OFF);
+	unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
+	status = cause & unmask;
+
+	/* "error" interrupt handler does not process INTX interrupts */
+	status &= ~(PCIE_INT_INTX(0) | PCIE_INT_INTX(1) |
+		    PCIE_INT_INTX(2) | PCIE_INT_INTX(3));
+
+	/* Process PME interrupt */
+	if ((status & PCIE_INT_PM_PME) && !port->pme_pending) {
+		/*
+		 * Do not clear PME interrupt bit in Cause Register as it
+		 * invalidates also content of Root Status Register. Instead
+		 * set port->pme_pending variable to true to indicate that
+		 * next time PME interrupt should be ignored until variable
+		 * is back to the false value.
+		 */
+		port->pme_pending = true;
+		if (generic_handle_domain_irq(port->rp_irq_domain, 0) == -EINVAL)
+			dev_err_ratelimited(dev, "unhandled PME IRQ\n");
+	}
+
+	/* Process ERR interrupt */
+	if (status & PCIE_INT_ERR_MASK) {
+		mvebu_writel(port, ~PCIE_INT_ERR_MASK, PCIE_INT_CAUSE_OFF);
+		if (generic_handle_domain_irq(port->rp_irq_domain, 0) == -EINVAL)
+			dev_err_ratelimited(dev, "unhandled ERR IRQ\n");
+	}
+
+	/* Process local ERR interrupt */
+	if (status & PCIE_INT_DET_MASK) {
+		mvebu_writel(port, ~PCIE_INT_DET_MASK, PCIE_INT_CAUSE_OFF);
+		if (generic_handle_domain_irq(port->rp_irq_domain, 0) == -EINVAL)
+			dev_err_ratelimited(dev, "unhandled ERR IRQ\n");
+	}
+
+	return status ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static irqreturn_t mvebu_pcie_intx_irq_handler(int irq, void *arg)
 {
 	struct mvebu_pcie_port *port = arg;
 	struct device *dev = &port->pcie->pdev->dev;
@@ -1108,6 +1254,10 @@ static irqreturn_t mvebu_pcie_irq_handler(int irq, void *arg)
 	unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
 	status = cause & unmask;
 
+	/* "intx" interrupt handler process only INTX interrupts */
+	status &= PCIE_INT_INTX(0) | PCIE_INT_INTX(1) |
+		  PCIE_INT_INTX(2) | PCIE_INT_INTX(3);
+
 	/* Process legacy INTx interrupts */
 	for (i = 0; i < PCI_NUM_INTX; i++) {
 		if (!(status & PCIE_INT_INTX(i)))
@@ -1122,9 +1272,29 @@ static irqreturn_t mvebu_pcie_irq_handler(int irq, void *arg)
 
 static int mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	/* Interrupt support on mvebu emulated bridges is not implemented yet */
-	if (dev->bus->number == 0)
-		return 0; /* Proper return code 0 == NO_IRQ */
+	struct mvebu_pcie_port *port;
+	struct mvebu_pcie *pcie;
+
+	if (dev->bus->number == 0) {
+		/*
+		 * Each emulated root bridge for every mvebu port has its own
+		 * Root Port irq chip and irq domain. Argument pin is the INTx
+		 * pin (1=INTA, 2=INTB, 3=INTC, 4=INTD) and hwirq for function
+		 * irq_create_mapping() is indexed from zero.
+		 */
+		pcie = dev->bus->sysdata;
+		port = mvebu_pcie_find_port(pcie, dev->bus, PCI_DEVFN(slot, 0));
+		if (!port)
+			return 0; /* Proper return code 0 == NO_IRQ */
+		/*
+		 * port->rp_irq_domain is available only when "error" interrupt
+		 * was specified in DT. When is not available then interrupts
+		 * for emulated root bridge are not provided.
+		 */
+		if (port->error_irq <= 0)
+			return 0; /* Proper return code 0 == NO_IRQ */
+		return irq_create_mapping(port->rp_irq_domain, pin - 1);
+	}
 
 	return of_irq_parse_and_map_pci(dev, slot, pin);
 }
@@ -1333,6 +1503,21 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
 			 port->name, child);
 	}
 
+	/*
+	 * Old DT bindings do not contain "error" interrupt
+	 * so do not fail probing driver when interrupt does not exist.
+	 */
+	port->error_irq = of_irq_get_byname(child, "error");
+	if (port->error_irq == -EPROBE_DEFER) {
+		ret = port->error_irq;
+		goto err;
+	}
+	if (port->error_irq <= 0) {
+		dev_warn(dev, "%s: interrupts on Root Port are unsupported, "
+			      "%pOF does not contain error interrupt\n",
+			 port->name, child);
+	}
+
 	reset_gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, &flags);
 	if (reset_gpio == -EPROBE_DEFER) {
 		ret = reset_gpio;
@@ -1538,7 +1723,6 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
 
 	for (i = 0; i < pcie->nports; i++) {
 		struct mvebu_pcie_port *port = &pcie->ports[i];
-		int irq = port->intx_irq;
 
 		child = port->dn;
 		if (!child)
@@ -1566,7 +1750,7 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
 			continue;
 		}
 
-		if (irq > 0) {
+		if (port->error_irq > 0 || port->intx_irq > 0) {
 			ret = mvebu_pcie_init_irq_domain(port);
 			if (ret) {
 				dev_err(dev, "%s: cannot init irq domain\n",
@@ -1577,14 +1761,42 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
 				mvebu_pcie_powerdown(port);
 				continue;
 			}
+		}
+
+		if (port->error_irq > 0) {
+			ret = devm_request_irq(dev, port->error_irq,
+					       mvebu_pcie_error_irq_handler,
+					       IRQF_SHARED | IRQF_NO_THREAD,
+					       port->name, port);
+			if (ret) {
+				dev_err(dev, "%s: cannot register error interrupt handler: %d\n",
+					port->name, ret);
+				if (port->intx_irq_domain)
+					irq_domain_remove(port->intx_irq_domain);
+				if (port->rp_irq_domain)
+					irq_domain_remove(port->rp_irq_domain);
+				pci_bridge_emul_cleanup(&port->bridge);
+				devm_iounmap(dev, port->base);
+				port->base = NULL;
+				mvebu_pcie_powerdown(port);
+				continue;
+			}
+		}
 
-			ret = devm_request_irq(dev, irq, mvebu_pcie_irq_handler,
+		if (port->intx_irq > 0) {
+			ret = devm_request_irq(dev, port->intx_irq,
+					       mvebu_pcie_intx_irq_handler,
 					       IRQF_SHARED | IRQF_NO_THREAD,
 					       port->name, port);
 			if (ret) {
-				dev_err(dev, "%s: cannot register interrupt handler: %d\n",
+				dev_err(dev, "%s: cannot register intx interrupt handler: %d\n",
 					port->name, ret);
-				irq_domain_remove(port->intx_irq_domain);
+				if (port->error_irq > 0)
+					devm_free_irq(dev, port->error_irq, port);
+				if (port->intx_irq_domain)
+					irq_domain_remove(port->intx_irq_domain);
+				if (port->rp_irq_domain)
+					irq_domain_remove(port->rp_irq_domain);
 				pci_bridge_emul_cleanup(&port->bridge);
 				devm_iounmap(dev, port->base);
 				port->base = NULL;
@@ -1722,6 +1934,12 @@ static int mvebu_pcie_remove(struct platform_device *pdev)
 			}
 			irq_domain_remove(port->intx_irq_domain);
 		}
+		if (port->rp_irq_domain) {
+			int virq = irq_find_mapping(port->rp_irq_domain, 0);
+			if (virq > 0)
+				irq_dispose_mapping(virq);
+			irq_domain_remove(port->rp_irq_domain);
+		}
 
 		/* Free config space for emulated root bridge. */
 		pci_bridge_emul_cleanup(&port->bridge);
-- 
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ