| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220817232057.73643-3-elliott@hpe.com>
Date: Wed, 17 Aug 2022 18:20:49 -0500
From: Robert Elliott <elliott@....com>
To: herbert@...dor.apana.org.au, davem@...emloft.net,
ebiggers@...nel.org, linux-crypto@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Robert Elliott <elliott@....com>
Subject: [PATCH v2 02/10] crypto: Kconfig - move powerpc entries to a submenu
Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.
Suggested-by: Eric Biggers <ebiggers@...nel.org>
Signed-off-by: Robert Elliott <elliott@....com>
---
arch/powerpc/crypto/Kconfig | 77 +++++++++++++++++++++++++++++++++++++
crypto/Kconfig | 76 ++----------------------------------
2 files changed, 80 insertions(+), 73 deletions(-)
create mode 100644 arch/powerpc/crypto/Kconfig
diff --git a/arch/powerpc/crypto/Kconfig b/arch/powerpc/crypto/Kconfig
new file mode 100644
index 000000000000..74f535940faa
--- /dev/null
+++ b/arch/powerpc/crypto/Kconfig
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menu "Accelerated Cryptographic Algorithms for CPU (powerpc)"
+
+config CRYPTO_CRC32C_VPMSUM
+ tristate "CRC32c CRC algorithm (powerpc64)"
+ depends on PPC64 && ALTIVEC
+ select CRYPTO_HASH
+ select CRC32
+ help
+ CRC32c algorithm implemented using vector polynomial multiply-sum
+ (vpmsum) instructions, introduced in POWER8. Enable on POWER8
+ and newer processors for improved performance.
+
+config CRYPTO_CRCT10DIF_VPMSUM
+ tristate "CRC32T10DIF powerpc64 hardware acceleration"
+ depends on PPC64 && ALTIVEC && CRC_T10DIF
+ select CRYPTO_HASH
+ help
+ CRC10T10DIF algorithm implemented using vector polynomial
+ multiply-sum (vpmsum) instructions, introduced in POWER8. Enable on
+ POWER8 and newer processors for improved performance.
+
+config CRYPTO_VPMSUM_TESTER
+ tristate "Powerpc64 vpmsum hardware acceleration tester"
+ depends on CRYPTO_CRCT10DIF_VPMSUM && CRYPTO_CRC32C_VPMSUM
+ help
+ Stress test for CRC32c and CRC-T10DIF algorithms implemented with
+ POWER8 vpmsum instructions.
+ Unless you are testing these algorithms, you don't need this.
+
+config CRYPTO_MD5_PPC
+ tristate "MD5 digest algorithm (PPC)"
+ depends on PPC
+ select CRYPTO_HASH
+ help
+ MD5 message digest algorithm (RFC1321) implemented
+ in PPC assembler.
+
+config CRYPTO_SHA1_PPC
+ tristate "SHA1 digest algorithm (powerpc)"
+ depends on PPC
+ help
+ This is the powerpc hardware accelerated implementation of the
+ SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
+
+config CRYPTO_SHA1_PPC_SPE
+ tristate "SHA1 digest algorithm (PPC SPE)"
+ depends on PPC && SPE
+ help
+ SHA-1 secure hash standard (DFIPS 180-4) implemented
+ using powerpc SPE SIMD instruction set.
+
+config CRYPTO_SHA256_PPC_SPE
+ tristate "SHA224 and SHA256 digest algorithm (PPC SPE)"
+ depends on PPC && SPE
+ select CRYPTO_SHA256
+ select CRYPTO_HASH
+ help
+ SHA224 and SHA256 secure hash standard (DFIPS 180-2)
+ implemented using powerpc SPE SIMD instruction set.
+
+config CRYPTO_AES_PPC_SPE
+ tristate "AES cipher algorithms (PPC SPE)"
+ depends on PPC && SPE
+ select CRYPTO_SKCIPHER
+ help
+ AES cipher algorithms (FIPS-197). Additionally the acceleration
+ for popular block cipher modes ECB, CBC, CTR and XTS is supported.
+ This module should only be used for low power (router) devices
+ without hardware AES acceleration (e.g. caam crypto). It reduces the
+ size of the AES tables from 16KB to 8KB + 256 bytes and mitigates
+ timining attacks. Nevertheless it might be not as secure as other
+ architecture specific assembler implementations that work on 1KB
+ tables or 256 bytes S-boxes.
+
+endmenu
diff --git a/crypto/Kconfig b/crypto/Kconfig
index a236a859358b..efb73dae2e52 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -617,17 +617,6 @@ menuconfig CRYPTO
gain performance compared with software implementation.
Module will be crc32c-intel.
-config CRYPTO_CRC32C_VPMSUM
- tristate "CRC32c CRC algorithm (powerpc64)"
- depends on PPC64 && ALTIVEC
- select CRYPTO_HASH
- select CRC32
- help
- CRC32c algorithm implemented using vector polynomial multiply-sum
- (vpmsum) instructions, introduced in POWER8. Enable on POWER8
- and newer processors for improved performance.
-
-
config CRYPTO_CRC32C_SPARC64
tristate "CRC32c CRC algorithm (SPARC64)"
depends on SPARC64
@@ -739,28 +728,11 @@ menuconfig CRYPTO
'crct10dif-pclmul' module, which is faster when computing the
crct10dif checksum as compared with the generic table implementation.
-config CRYPTO_CRCT10DIF_VPMSUM
- tristate "CRC32T10DIF powerpc64 hardware acceleration"
- depends on PPC64 && ALTIVEC && CRC_T10DIF
- select CRYPTO_HASH
- help
- CRC10T10DIF algorithm implemented using vector polynomial
- multiply-sum (vpmsum) instructions, introduced in POWER8. Enable on
- POWER8 and newer processors for improved performance.
-
config CRYPTO_CRC64_ROCKSOFT
tristate "Rocksoft Model CRC64 algorithm"
depends on CRC64
select CRYPTO_HASH
-config CRYPTO_VPMSUM_TESTER
- tristate "Powerpc64 vpmsum hardware acceleration tester"
- depends on CRYPTO_CRCT10DIF_VPMSUM && CRYPTO_CRC32C_VPMSUM
- help
- Stress test for CRC32c and CRC-T10DIF algorithms implemented with
- POWER8 vpmsum instructions.
- Unless you are testing these algorithms, you don't need this.
-
config CRYPTO_GHASH
tristate "GHASH hash function"
select CRYPTO_GF128MUL
@@ -805,14 +777,6 @@ menuconfig CRYPTO
help
MD5 message digest algorithm (RFC1321).
-config CRYPTO_MD5_PPC
- tristate "MD5 digest algorithm (PPC)"
- depends on PPC
- select CRYPTO_HASH
- help
- MD5 message digest algorithm (RFC1321) implemented
- in PPC assembler.
-
config CRYPTO_MD5_SPARC64
tristate "MD5 digest algorithm (SPARC64)"
depends on SPARC64
@@ -907,20 +871,6 @@ menuconfig CRYPTO
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
using sparc64 crypto instructions, when available.
-config CRYPTO_SHA1_PPC
- tristate "SHA1 digest algorithm (powerpc)"
- depends on PPC
- help
- This is the powerpc hardware accelerated implementation of the
- SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
-
-config CRYPTO_SHA1_PPC_SPE
- tristate "SHA1 digest algorithm (PPC SPE)"
- depends on PPC && SPE
- help
- SHA-1 secure hash standard (DFIPS 180-4) implemented
- using powerpc SPE SIMD instruction set.
-
config CRYPTO_SHA1_S390
tristate "SHA1 digest algorithm"
depends on S390
@@ -944,15 +894,6 @@ menuconfig CRYPTO
This code also includes SHA-224, a 224 bit hash with 112 bits
of security against collision attacks.
-config CRYPTO_SHA256_PPC_SPE
- tristate "SHA224 and SHA256 digest algorithm (PPC SPE)"
- depends on PPC && SPE
- select CRYPTO_SHA256
- select CRYPTO_HASH
- help
- SHA224 and SHA256 secure hash standard (DFIPS 180-2)
- implemented using powerpc SPE SIMD instruction set.
-
config CRYPTO_SHA256_SPARC64
tristate "SHA224 and SHA256 digest algorithm (SPARC64)"
depends on SPARC64
@@ -1194,20 +1135,6 @@ menuconfig CRYPTO
for some popular block cipher mode is supported too, including
ECB and CBC.
-config CRYPTO_AES_PPC_SPE
- tristate "AES cipher algorithms (PPC SPE)"
- depends on PPC && SPE
- select CRYPTO_SKCIPHER
- help
- AES cipher algorithms (FIPS-197). Additionally the acceleration
- for popular block cipher modes ECB, CBC, CTR and XTS is supported.
- This module should only be used for low power (router) devices
- without hardware AES acceleration (e.g. caam crypto). It reduces the
- size of the AES tables from 16KB to 8KB + 256 bytes and mitigates
- timining attacks. Nevertheless it might be not as secure as other
- architecture specific assembler implementations that work on 1KB
- tables or 256 bytes S-boxes.
-
config CRYPTO_AES_S390
tristate "AES cipher algorithms"
depends on S390
@@ -2020,6 +1947,9 @@ menuconfig CRYPTO_DRBG_MENU
if MIPS
source "arch/mips/crypto/Kconfig"
endif
+if PPC
+source "arch/powerpc/crypto/Kconfig"
+endif
source "drivers/crypto/Kconfig"
source "crypto/asymmetric_keys/Kconfig"
--
2.37.1
Powered by blists - more mailing lists