[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <d2b28def-28d8-1a7b-8971-e13eb35e43fa@linaro.org>
Date: Wed, 17 Aug 2022 08:52:18 +0300
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: wei.fang@....com, andrew@...n.ch, hkallweit1@...il.com,
linux@...linux.org.uk, davem@...emloft.net, edumazet@...gle.com,
kuba@...nel.org, pabeni@...hat.com, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, f.fainelli@...il.com,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH V2 net 1/2] dt-bindings: net: ar803x: add
disable-hibernation-mode propetry
On 17/08/2022 05:03, wei.fang@....com wrote:
> From: Wei Fang <wei.fang@....com>
>
> The hibernation mode of Atheros AR803x PHYs defaults to be
> enabled after hardware reset. When the cable is unplugged,
> the PHY will enter hibernation mode after about 10 seconds
> and the PHY clocks will be stopped to save power.
> However, some MACs need the phy output clock for proper
> functioning of their logic. For instance, stmmac needs the
> RX_CLK of PHY for software reset to complete.
> Therefore, add a DT property to configure the PHY to disable
> this hardware hibernation mode.
>
> Signed-off-by: Wei Fang <wei.fang@....com>
> ---
> V2 change:
> 1. Add subject prefix.
> 2. Modify the property name and description to make them
> clear.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Best regards,
Krzysztof
Powered by blists - more mailing lists