linux-kernel - Re: [PATCH v2 13/16] hwmon: (mr75203) add thermal coefficient properties for Moortec PVT controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220818202531.GA3431466@roeck-us.net>
Date:   Thu, 18 Aug 2022 13:25:31 -0700
From:   Guenter Roeck <linux@...ck-us.net>
To:     Eliav Farber <farbere@...zon.com>
Cc:     jdelvare@...e.com, robh+dt@...nel.org, mark.rutland@....com,
        linux-hwmon@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, talel@...zon.com, hhhawa@...zon.com,
        jonnyc@...zon.com, hanochu@...zon.com, ronenk@...zon.com,
        itamark@...zon.com, shellykz@...zon.com, shorer@...zon.com,
        amitlavi@...zon.com, almogbs@...zon.com, dwmw@...zon.co.uk,
        rtanwar@...linear.com
Subject: Re: [PATCH v2 13/16] hwmon: (mr75203) add thermal coefficient
 properties for Moortec PVT controller

On Wed, Aug 17, 2022 at 05:43:18AM +0000, Eliav Farber wrote:
> Add optional "ts-coeff-g", "ts-coeff-h", "ts-coeff-cal5" and
> "ts-coeff-j" properties to be used instead of defaults for the
> thermal equasion.
> 
Vendor prefix again, and shouldn;t there be some note about the
to-be-used defaults ?

Guenter

> Signed-off-by: Eliav Farber <farbere@...zon.com>
> ---
>  .../bindings/hwmon/moortec,mr75203.yaml       | 33 +++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> index e2a55001eefc..867664bd937f 100644
> --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> @@ -62,6 +62,30 @@ properties:
>        used to normalzie the voltage output results.
>      $ref: /schemas/types.yaml#definitions/uint32
>  
> +  ts-coeff-g:
> +    description:
> +      G coefficient for thermal equation.
> +    maxItems: 1
> +    $ref: /schemas/types.yaml#definitions/uint32
> +
> +  ts-coeff-h:
> +    description:
> +      H coefficient for thermal equation.
> +    maxItems: 1
> +    $ref: /schemas/types.yaml#definitions/uint32
> +
> +  ts-coeff-cal5:
> +    description:
> +      cal5 coefficient for thermal equation (can't be 0).
> +    maxItems: 1
> +    $ref: /schemas/types.yaml#definitions/uint32
> +
> +  ts-coeff-j:
> +    description:
> +      J coefficient for thermal equation.
> +    maxItems: 1
> +    $ref: /schemas/types.yaml#definitions/int32
> +
>  required:
>    - compatible
>    - reg
> @@ -75,6 +99,10 @@ additionalProperties:
>    - reset-control-skip
>    - vm-active-channels
>    - vm-pre-scalar-ch#
> +  - ts-coeff-g
> +  - ts-coeff-h
> +  - ts-coeff-cal5
> +  - ts-coeff-j
>  
>  examples:
>    - |
> @@ -90,5 +118,10 @@ examples:
>          resets = <&rcu0 0x40 7>;
>          vm-active-channels = [08 10 02];
>          vm-pre-scalar-ch5 = <2>;
> +        ts-coeff-g = <57400>;
> +        ts-coeff-h = <249400>;
> +        ts-coeff-cal5 = <4096>;
> +        ts-coeff-j = <0>;
> +
>          #thermal-sensor-cells = <1>;
>      };