| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220818220245.338396-2-robimarko@gmail.com>
Date: Fri, 19 Aug 2022 00:02:42 +0200
From: Robert Marko <robimarko@...il.com>
To: amitk@...nel.org, thara.gopinath@...il.com, agross@...nel.org,
bjorn.andersson@...aro.org, konrad.dybcio@...ainline.org,
rafael@...nel.org, daniel.lezcano@...aro.org, rui.zhang@...el.com,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
linux-pm@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Robert Marko <robimarko@...il.com>
Subject: [PATCH v7 2/5] drivers: thermal: tsens: Add support for combined interrupt
Despite using tsens v2.3 IP, IPQ8074 and IPQ6018 only have one IRQ for
signaling both up/low and critical trips.
Signed-off-by: Robert Marko <robimarko@...il.com>
---
Changes in v7:
* Rebase to apply on next-20220818
Changes in v6:
* Check critical IRQ handler return, simplify up/low return
---
drivers/thermal/qcom/tsens-8960.c | 1 +
drivers/thermal/qcom/tsens-v0_1.c | 1 +
drivers/thermal/qcom/tsens-v1.c | 1 +
drivers/thermal/qcom/tsens-v2.c | 1 +
drivers/thermal/qcom/tsens.c | 38 ++++++++++++++++++++++++++-----
drivers/thermal/qcom/tsens.h | 2 ++
6 files changed, 38 insertions(+), 6 deletions(-)
diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 67c1748cdf73..ee584e5b07e5 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -269,6 +269,7 @@ static const struct tsens_ops ops_8960 = {
static struct tsens_features tsens_8960_feat = {
.ver_major = VER_0,
.crit_int = 0,
+ .combo_int = 0,
.adc = 1,
.srot_split = 0,
.max_sensors = 11,
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index f136cb350238..6effb822bf3c 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -539,6 +539,7 @@ static int calibrate_9607(struct tsens_priv *priv)
static struct tsens_features tsens_v0_1_feat = {
.ver_major = VER_0_1,
.crit_int = 0,
+ .combo_int = 0,
.adc = 1,
.srot_split = 1,
.max_sensors = 11,
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index 573e261ccca7..a4f561a6e582 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -302,6 +302,7 @@ static int calibrate_8976(struct tsens_priv *priv)
static struct tsens_features tsens_v1_feat = {
.ver_major = VER_1_X,
.crit_int = 0,
+ .combo_int = 0,
.adc = 1,
.srot_split = 1,
.max_sensors = 11,
diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
index b293ed32174b..129cdb247381 100644
--- a/drivers/thermal/qcom/tsens-v2.c
+++ b/drivers/thermal/qcom/tsens-v2.c
@@ -31,6 +31,7 @@
static struct tsens_features tsens_v2_feat = {
.ver_major = VER_2_X,
.crit_int = 1,
+ .combo_int = 0,
.adc = 0,
.srot_split = 1,
.max_sensors = 16,
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index b1b10005fb28..816769af8813 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -532,6 +532,27 @@ static irqreturn_t tsens_irq_thread(int irq, void *data)
return IRQ_HANDLED;
}
+/**
+ * tsens_combined_irq_thread - Threaded interrupt handler for combined interrupts
+ * @irq: irq number
+ * @data: tsens controller private data
+ *
+ * Handle the combined interrupt as if it were 2 separate interrupts, so call the
+ * critical handler first and then the up/low one.
+ *
+ * Return: IRQ_HANDLED
+ */
+static irqreturn_t tsens_combined_irq_thread(int irq, void *data)
+{
+ irqreturn_t ret;
+
+ ret = tsens_critical_irq_thread(irq, data);
+ if (ret != IRQ_HANDLED)
+ return ret;
+
+ return tsens_irq_thread(irq, data);
+}
+
static int tsens_set_trips(struct thermal_zone_device *tz, int low, int high)
{
struct tsens_sensor *s = tz->devdata;
@@ -1071,13 +1092,18 @@ static int tsens_register(struct tsens_priv *priv)
tsens_mC_to_hw(priv->sensor, 0));
}
- ret = tsens_register_irq(priv, "uplow", tsens_irq_thread);
- if (ret < 0)
- return ret;
+ if (priv->feat->combo_int) {
+ ret = tsens_register_irq(priv, "combined",
+ tsens_combined_irq_thread);
+ } else {
+ ret = tsens_register_irq(priv, "uplow", tsens_irq_thread);
+ if (ret < 0)
+ return ret;
- if (priv->feat->crit_int)
- ret = tsens_register_irq(priv, "critical",
- tsens_critical_irq_thread);
+ if (priv->feat->crit_int)
+ ret = tsens_register_irq(priv, "critical",
+ tsens_critical_irq_thread);
+ }
return ret;
}
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index ba05c8233356..1678c5e9e60b 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -493,6 +493,7 @@ enum regfield_ids {
* struct tsens_features - Features supported by the IP
* @ver_major: Major number of IP version
* @crit_int: does the IP support critical interrupts?
+ * @combo_int: does the IP use one IRQ for up, low and critical thresholds?
* @adc: do the sensors only output adc code (instead of temperature)?
* @srot_split: does the IP neatly splits the register space into SROT and TM,
* with SROT only being available to secure boot firmware?
@@ -502,6 +503,7 @@ enum regfield_ids {
struct tsens_features {
unsigned int ver_major;
unsigned int crit_int:1;
+ unsigned int combo_int:1;
unsigned int adc:1;
unsigned int srot_split:1;
unsigned int has_watchdog:1;
--
2.37.2
Powered by blists - more mailing lists