linux-kernel - [PATCH 5.10 103/545] hwmon: (sht15) Fix wrong assumptions in device remove callback

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220819153833.892684504@linuxfoundation.org>
Date:   Fri, 19 Aug 2022 17:37:53 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Uwe Kleine-König 
        <u.kleine-koenig@...gutronix.de>,
        Guenter Roeck <linux@...ck-us.net>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.10 103/545] hwmon: (sht15) Fix wrong assumptions in device remove callback

From: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>

[ Upstream commit 7d4edccc9bbfe1dcdff641343f7b0c6763fbe774 ]

Taking a lock at the beginning of .remove() doesn't prevent new readers.
With the existing approach it can happen, that a read occurs just when
the lock was taken blocking the reader until the lock is released at the
end of the remove callback which then accessed *data that is already
freed then.

To actually fix this problem the hwmon core needs some adaption. Until
this is implemented take the optimistic approach of assuming that all
readers are gone after hwmon_device_unregister() and
sysfs_remove_group() as most other drivers do. (And once the core
implements that, taking the lock would deadlock.)

So drop the lock, move the reset to after device unregistration to keep
the device in a workable state until it's deregistered. Also add a error
message in case the reset fails and return 0 anyhow. (Returning an error
code, doesn't stop the platform device unregistration and only results
in a little helpful error message before the devm cleanup handlers are
called.)

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
Link: https://lore.kernel.org/r/20220725194344.150098-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@...ck-us.net>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/hwmon/sht15.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 7f4a63959730..ae4d14257a11 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -1020,25 +1020,20 @@ static int sht15_probe(struct platform_device *pdev)
 static int sht15_remove(struct platform_device *pdev)
 {
 	struct sht15_data *data = platform_get_drvdata(pdev);
+	int ret;

-	/*
-	 * Make sure any reads from the device are done and
-	 * prevent new ones beginning
-	 */
-	mutex_lock(&data->read_lock);
-	if (sht15_soft_reset(data)) {
-		mutex_unlock(&data->read_lock);
-		return -EFAULT;
-	}
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&pdev->dev.kobj, &sht15_attr_group);
+
+	ret = sht15_soft_reset(data);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to reset device (%pe)\n", ERR_PTR(ret));
+
 	if (!IS_ERR(data->reg)) {
 		regulator_unregister_notifier(data->reg, &data->nb);
 		regulator_disable(data->reg);
 	}

-	mutex_unlock(&data->read_lock);
-
 	return 0;
 }

-- 
2.35.1