| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Yv/4du75DNO2Xykr@lunn.ch>
Date: Fri, 19 Aug 2022 22:54:14 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Oleksij Rempel <o.rempel@...gutronix.de>
Cc: Heiner Kallweit <hkallweit1@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Russell King <linux@...linux.org.uk>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Jonathan Corbet <corbet@....net>, kernel@...gutronix.de,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-doc@...r.kernel.org,
David Jander <david@...tonic.nl>
Subject: Re: [PATCH net-next v1 4/7] net: pse-pd: add generic PSE driver
On Fri, Aug 19, 2022 at 02:01:06PM +0200, Oleksij Rempel wrote:
> Add generic driver to support simple Power Sourcing Equipment without
> automatic classification support.
>
> This driver was tested on 10Bast-T1L switch with regulator based PoDL PSE.
>
> Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> ---
> drivers/net/pse-pd/Kconfig | 11 +++
> drivers/net/pse-pd/Makefile | 2 +
> drivers/net/pse-pd/pse_generic.c | 146 +++++++++++++++++++++++++++++++
> 3 files changed, 159 insertions(+)
> create mode 100644 drivers/net/pse-pd/pse_generic.c
>
> diff --git a/drivers/net/pse-pd/Kconfig b/drivers/net/pse-pd/Kconfig
> index 49c7f0bcff526..a804c9f1af2bc 100644
> --- a/drivers/net/pse-pd/Kconfig
> +++ b/drivers/net/pse-pd/Kconfig
> @@ -9,3 +9,14 @@ menuconfig PSE_CONTROLLER
> Generic Power Sourcing Equipment Controller support.
>
> If unsure, say no.
> +
> +if PSE_CONTROLLER
> +
> +config PSE_GENERIC
> + tristate "Generic PSE driver"
> + help
> + This module provides support for simple Ethernet Power Sourcing
> + Equipment without automatic classification support. For example for
> + PoDL (802.3bu) specification.
> +
> +endif
> diff --git a/drivers/net/pse-pd/Makefile b/drivers/net/pse-pd/Makefile
> index cbb79fc2e2706..80ef39ad68f10 100644
> --- a/drivers/net/pse-pd/Makefile
> +++ b/drivers/net/pse-pd/Makefile
> @@ -2,3 +2,5 @@
> # Makefile for Linux PSE drivers
>
> obj-$(CONFIG_PSE_CONTROLLER) += pse-core.o
> +
> +obj-$(CONFIG_PSE_GENERIC) += pse_generic.o
> diff --git a/drivers/net/pse-pd/pse_generic.c b/drivers/net/pse-pd/pse_generic.c
> new file mode 100644
> index 0000000000000..f264d4d589f59
> --- /dev/null
> +++ b/drivers/net/pse-pd/pse_generic.c
> @@ -0,0 +1,146 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +//
> +// Driver for the Generic Ethernet Power Sourcing Equipment, without
> +// auto classification support.
> +//
> +// Copyright (c) 2022 Pengutronix, Oleksij Rempel <kernel@...gutronix.de>
> +//
> +
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pse-pd/pse.h>
> +#include <linux/regulator/consumer.h>
> +
> +struct gen_pse_priv {
> + struct pse_controller_dev pcdev;
> + struct regulator *ps; /*power source */
> + enum ethtool_podl_pse_admin_state admin_state;
> +};
> +
> +static struct gen_pse_priv *to_gen_pse(struct pse_controller_dev *pcdev)
> +{
> + return container_of(pcdev, struct gen_pse_priv, pcdev);
> +}
> +
> +static int
> +gen_pse_podl_get_admin_sate(struct pse_controller_dev *pcdev, unsigned long id)
Should that be state?
> +{
> + struct gen_pse_priv *priv = to_gen_pse(pcdev);
> +
> + /* aPoDLPSEAdminState can be different to aPoDLPSEPowerDetectionStatus
> + * which is provided by the regulator.
> + */
> + return priv->admin_state;
> +}
> +
> +static int
> +gen_pse_podl_set_admin_control(struct pse_controller_dev *pcdev,
> + unsigned long id,
> + enum ethtool_podl_pse_admin_state state)
> +{
> + struct gen_pse_priv *priv = to_gen_pse(pcdev);
> + int ret;
> +
> + if (priv->admin_state == state)
> + goto set_state;
return 0; ?
> +
> + switch (state) {
> + case ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED:
> + ret = regulator_enable(priv->ps);
> + break;
> + case ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED:
> + ret = regulator_disable(priv->ps);
> + break;
> + default:
> + dev_err(pcdev->dev, "Unknown admin state %i\n", state);
> + ret = -ENOTSUPP;
> + }
> +
> + if (ret)
> + return ret;
> +
> +set_state:
> + priv->admin_state = state;
> +
> + return 0;
> +}
> +
> +static int
> +gen_pse_podl_get_pw_d_status(struct pse_controller_dev *pcdev, unsigned long id)
> +{
> + struct gen_pse_priv *priv = to_gen_pse(pcdev);
> + int ret;
> +
> + ret = regulator_is_enabled(priv->ps);
> + if (ret < 0)
> + return ret;
> +
> + if (!ret)
> + return ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED;
> +
> + return ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING;
> +}
> +
> +static const struct pse_control_ops gen_pse_ops = {
> + .get_podl_pse_admin_sate = gen_pse_podl_get_admin_sate,
> + .set_podl_pse_admin_control = gen_pse_podl_set_admin_control,
> + .get_podl_pse_pw_d_status = gen_pse_podl_get_pw_d_status,
> +};
> +
> +static int
> +gen_pse_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct gen_pse_priv *priv;
> + int ret;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + if (!pdev->dev.of_node)
> + return -ENOENT;
> +
> + priv->ps = devm_regulator_get(dev, "ieee802.3-podl-pse");
> + if (IS_ERR(priv->ps)) {
> + dev_err(dev, "failed to get PSE regulator (%pe)\n", priv->ps);
> + return PTR_ERR(priv->ps);
> + }
> +
> + platform_set_drvdata(pdev, priv);
> +
> + priv->admin_state = ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED;
There is the comment earlier:
/* aPoDLPSEAdminState can be different to aPoDLPSEPowerDetectionStatus
* which is provided by the regulator.
Is this because the regulator might of been turned on, but it has
detected a short and turned itself off? So it is administratively on,
but off in order to stop the magic smoke escaping?
But what about the other way around? Something has already turned the
regulator on, e.g. the bootloader. Should the default be
ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED even thought power is being
delivered? Do we want to put the regulator into the off state at
probe, so it is in a well defined state? Or set priv->admin_state to
whatever regulator_is_enabled() indicates?
Andrew
Powered by blists - more mailing lists