linux-kernel - Re: [PATCH v2 5/8] riscv: dts: renesas: Add initial devicetree for Renesas RZ/Five SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAMuHMdUGttswcSGeOdrJLeoZLmoeKhm7R82L-3wLJnagmZ4dBA@mail.gmail.com>
Date:   Sat, 20 Aug 2022 10:45:56 +0200
From:   Geert Uytterhoeven <geert@...ux-m68k.org>
To:     Conor Dooley <Conor.Dooley@...rochip.com>
Cc:     "Lad, Prabhakar" <prabhakar.mahadev-lad.rj@...renesas.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        Palmer Dabbelt <palmer@...belt.com>,
        Albert Ou <aou@...s.berkeley.edu>,
        Geert Uytterhoeven <geert+renesas@...der.be>,
        Anup Patel <anup@...infault.org>,
        Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        linux-riscv <linux-riscv@...ts.infradead.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Prabhakar Lad <prabhakar.csengg@...il.com>,
        Biju Das <biju.das.jz@...renesas.com>
Subject: Re: [PATCH v2 5/8] riscv: dts: renesas: Add initial devicetree for
 Renesas RZ/Five SoC

Hi Conor,

On Fri, Aug 19, 2022 at 8:40 PM <Conor.Dooley@...rochip.com> wrote:
> On 15/08/2022 16:14, Lad Prabhakar wrote:
> > Add initial device tree for Renesas RZ/Five RISC-V CPU Core (AX45MP
> > Single).
> >
> > Below is the list of IP blocks added in the initial SoC DTSI which can be
> > used to boot via initramfs on RZ/Five SMARC EVK:
> > - AX45MP CPU
> > - CPG
> > - PINCTRL
> > - PLIC
> > - SCIF0
> > - SYSC
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> > ---
> > v1->v2
> > * Dropped including makefile change
> > * Updated ndev count
> > ---
> >  arch/riscv/boot/dts/renesas/r9a07g043.dtsi | 121 +++++++++++++++++++++
> >  1 file changed, 121 insertions(+)
> >  create mode 100644 arch/riscv/boot/dts/renesas/r9a07g043.dtsi
> >
> > diff --git a/arch/riscv/boot/dts/renesas/r9a07g043.dtsi b/arch/riscv/boot/dts/renesas/r9a07g043.dtsi
> > new file mode 100644
> > index 000000000000..b288d2607796
> > --- /dev/null
> > +++ b/arch/riscv/boot/dts/renesas/r9a07g043.dtsi
> > @@ -0,0 +1,121 @@
> > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +/*
> > + * Device Tree Source for the RZ/Five SoC
> > + *
> > + * Copyright (C) 2022 Renesas Electronics Corp.
> > + */
> > +
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/clock/r9a07g043-cpg.h>
> > +
> > +/ {
> > +     compatible = "renesas,r9a07g043";
> > +     #address-cells = <2>;
> > +     #size-cells = <2>;
> > +
> > +     /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
> > +     extal_clk: extal-clk {
> > +             compatible = "fixed-clock";
> > +             #clock-cells = <0>;
> > +             /* This value must be overridden by the board */
> > +             clock-frequency = <0>;
>
> What's the value in having the clock-frequency here if the board .dtsi
> overwrites it? dtbs_check will complain if someone forgets to fill it
> IIUC & what the missing frequency means is also kinda obvious, no?

Some external clocks may be optional. Hence "dtbs_check" will complain
if no "clock-frequency" is missing.

>
> That aside, by convention so far we have put things like extals or
> reference clocks below the /cpus node. Could you do the same here too
> please?

Really? We've been putting them at the root node for a long time,
since the separate "clocks" grouping subnode was deprecated.
The extal-clk is not even part of the SoC, so it should definitely
not be under the /cpus node.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds