[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <f9814f62fe2d6b6c21400ee3c83e46e61e0c72d1.1661094034.git.i.kononenko@yadro.com>
Date: Sun, 21 Aug 2022 18:54:10 +0300
From: Igor Kononenko <i.kononenko@...ro.com>
To: Joel Stanley <joel@....id.au>, Andrew Jeffery <andrew@...id.au>
CC: <openbmc@...ts.ozlabs.org>, Igor Kononenko <i.kononenko@...ro.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-aspeed@...ts.ozlabs.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 2/3] drivers/misc: (aspeed-lpc-snoop): Add regmap cleanup on a shutdown.
The bmc might be rebooted while the host is still reachable and the host
might send requests through configured lpc-kcs channels in same time.
That leads to raise lpc-snoop interrupts that haven't adjusted IRQ
handlers on next early kernel boot, because on the aspeed-chip reboot
might keep registers on a unclean state that is configured on the last
boot.
The patch brings an way to masking lpc-snoop interrupts all through
a bmc-rebooting time.
Tested on a YADRO VEGMAN N110 stand.
Signed-off-by: Igor Kononenko <i.kononenko@...ro.com>
---
drivers/soc/aspeed/aspeed-lpc-snoop.c | 44 +++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/drivers/soc/aspeed/aspeed-lpc-snoop.c b/drivers/soc/aspeed/aspeed-lpc-snoop.c
index eceeaf8dfbeb..6ec47bf1dc6b 100644
--- a/drivers/soc/aspeed/aspeed-lpc-snoop.c
+++ b/drivers/soc/aspeed/aspeed-lpc-snoop.c
@@ -235,6 +235,41 @@ static int aspeed_lpc_enable_snoop(struct aspeed_lpc_snoop *lpc_snoop,
return rc;
}
+static void aspeed_lpc_reset_regmap(struct aspeed_lpc_snoop *lpc_snoop)
+{
+ u8 index;
+ struct lpc_regman_cleanup {
+ u32 offset;
+ u32 mask;
+ u8 val;
+ };
+ static struct lpc_regman_cleanup cleanup_list[] = {
+ // Prevent handling ENINIT_SNPxW
+ { .offset = HICR5,
+ .mask = HICR5_EN_SNP0W | HICR5_ENINT_SNP0W,
+ .val = 0 },
+ { .offset = HICR5,
+ .mask = HICR5_EN_SNP1W | HICR5_ENINT_SNP1W,
+ .val = 0 },
+ { .offset = HICRB,
+ .mask = HICRB_ENSNP0D | HICRB_ENSNP1D,
+ .val = 0 },
+ // Reset SNOOP channel IRQ status
+ { .offset = HICR6,
+ .mask = HICR6_STR_SNP0W | HICR6_STR_SNP1W,
+ .val = 1 },
+ };
+ for (index = 0; index < ARRAY_SIZE(cleanup_list); index++) {
+ u32 val = 0;
+
+ if (cleanup_list[index].val)
+ val = cleanup_list[index].mask;
+ regmap_update_bits(lpc_snoop->regmap,
+ cleanup_list[index].offset,
+ cleanup_list[index].mask, val);
+ }
+}
+
static void aspeed_lpc_disable_snoop(struct aspeed_lpc_snoop *lpc_snoop,
int channel)
{
@@ -285,6 +320,7 @@ static int aspeed_lpc_snoop_probe(struct platform_device *pdev)
return -ENODEV;
}
+ aspeed_lpc_reset_regmap(lpc_snoop);
dev_set_drvdata(&pdev->dev, lpc_snoop);
rc = of_property_read_u32_index(dev->of_node, "snoop-ports", 0, &port);
@@ -345,6 +381,13 @@ static int aspeed_lpc_snoop_remove(struct platform_device *pdev)
return 0;
}
+static void aspeed_lpc_snoop_shutdown(struct platform_device *pdev)
+{
+ struct aspeed_lpc_snoop *lpc_snoop = dev_get_drvdata(&pdev->dev);
+
+ aspeed_lpc_reset_regmap(lpc_snoop);
+}
+
static const struct aspeed_lpc_snoop_model_data ast2400_model_data = {
.has_hicrb_ensnp = 0,
};
@@ -370,6 +413,7 @@ static struct platform_driver aspeed_lpc_snoop_driver = {
},
.probe = aspeed_lpc_snoop_probe,
.remove = aspeed_lpc_snoop_remove,
+ .shutdown = aspeed_lpc_snoop_shutdown,
};
module_platform_driver(aspeed_lpc_snoop_driver);
--
2.25.1
Powered by blists - more mailing lists