| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220821180637.GB6946@Mahakal>
Date: Sun, 21 Aug 2022 23:36:39 +0530
From: "<Vishal Badole>" <badolevishal1116@...il.com>
To: sboyd@...nel.org
Cc: mturquette@...libre.com, linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org, chinmoyghosh2001@...il.com,
vimal.kumar32@...il.com, Mintu Patel <mintupatel89@...il.com>
Subject: Re: [PATCH v3] Common clock: To list active consumers of clocks
On Tue, Aug 02, 2022 at 11:39:47PM +0530, Vishal Badole wrote:
> This feature lists the clock consumer's name and per-user enable count
> in clock summary. Using this feature user can easily check which device
> has acquired a perticular clock and it is enabled by respective device
> or not.
> for example:
> $ cat /sys/kernel/debug/clk/clk_summary
> enable prepare protect duty hardware per-user
> clock count count count rate accuracy phase cycle enable consumer count
> ----------------------------------------------------------------------------------------------------------------------------
> clk_mcasp0_fixed 0 0 0 24576000 0 0 50000 Y deviceless 0
> deviceless 0
> clk_mcasp0 0 0 0 24576000 0 0 50000 N simple-audio-card,cpu 0
> deviceless 0
>
> Co-developed-by: Chinmoy Ghosh <chinmoyghosh2001@...il.com>
> Signed-off-by: Chinmoy Ghosh <chinmoyghosh2001@...il.com>
> Co-developed-by: Mintu Patel <mintupatel89@...il.com>
> Signed-off-by: Mintu Patel <mintupatel89@...il.com>
> Co-developed-by: Vimal Kumar <vimal.kumar32@...il.com>
> Signed-off-by: Vimal Kumar <vimal.kumar32@...il.com>
> Signed-off-by: Vishal Badole <badolevishal1116@...il.com>
> ---
> drivers/clk/clk.c | 46 +++++++++++++++++++++++++++++++++++-----------
> 1 file changed, 35 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index f00d4c1..c96079f 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -102,6 +102,7 @@ struct clk {
> unsigned long min_rate;
> unsigned long max_rate;
> unsigned int exclusive_count;
> + unsigned int enable_count;
> struct hlist_node clks_node;
> };
>
> @@ -1008,6 +1009,10 @@ void clk_disable(struct clk *clk)
> return;
>
> clk_core_disable_lock(clk->core);
> +
> + if (clk->enable_count > 0)
> + clk->enable_count--;
> +
> }
> EXPORT_SYMBOL_GPL(clk_disable);
>
> @@ -1169,10 +1174,16 @@ EXPORT_SYMBOL_GPL(clk_restore_context);
> */
> int clk_enable(struct clk *clk)
> {
> + int ret;
> +
> if (!clk)
> return 0;
>
> - return clk_core_enable_lock(clk->core);
> + ret = clk_core_enable_lock(clk->core);
> + if (!ret)
> + clk->enable_count++;
> +
> + return ret;
> }
> EXPORT_SYMBOL_GPL(clk_enable);
>
> @@ -2953,28 +2964,41 @@ static void clk_summary_show_one(struct seq_file *s, struct clk_core *c,
> int level)
> {
> int phase;
> + struct clk *clk_user;
> + int multi_node = 0;
>
> - seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu ",
> + seq_printf(s, "%*s%-*s %-7d %-8d %-8d %-11lu %-10lu ",
> level * 3 + 1, "",
> - 30 - level * 3, c->name,
> + 35 - level * 3, c->name,
> c->enable_count, c->prepare_count, c->protect_count,
> clk_core_get_rate_recalc(c),
> clk_core_get_accuracy_recalc(c));
>
> phase = clk_core_get_phase(c);
> if (phase >= 0)
> - seq_printf(s, "%5d", phase);
> + seq_printf(s, "%-5d", phase);
> else
> seq_puts(s, "-----");
>
> - seq_printf(s, " %6d", clk_core_get_scaled_duty_cycle(c, 100000));
> + seq_printf(s, " %-6d", clk_core_get_scaled_duty_cycle(c, 100000));
>
> if (c->ops->is_enabled)
> - seq_printf(s, " %9c\n", clk_core_is_enabled(c) ? 'Y' : 'N');
> + seq_printf(s, " %5c ", clk_core_is_enabled(c) ? 'Y' : 'N');
> else if (!c->ops->enable)
> - seq_printf(s, " %9c\n", 'Y');
> + seq_printf(s, " %5c ", 'Y');
> else
> - seq_printf(s, " %9c\n", '?');
> + seq_printf(s, " %5c ", '?');
> +
> + hlist_for_each_entry(clk_user, &c->clks, clks_node) {
> + seq_printf(s, "%*s%-*s %-4d\n",
> + level * 3 + 2 + 105 * multi_node, "",
> + 30,
> + clk_user->dev_id ? clk_user->dev_id : "deviceless",
> + clk_user->enable_count);
> +
> + multi_node = 1;
> + }
> +
> }
>
> static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c,
> @@ -2995,9 +3019,9 @@ static int clk_summary_show(struct seq_file *s, void *data)
> struct clk_core *c;
> struct hlist_head **lists = (struct hlist_head **)s->private;
>
> - seq_puts(s, " enable prepare protect duty hardware\n");
> - seq_puts(s, " clock count count count rate accuracy phase cycle enable\n");
> - seq_puts(s, "-------------------------------------------------------------------------------------------------------\n");
> + seq_puts(s, " enable prepare protect duty hardware per-user\n");
> + seq_puts(s, " clock count count count rate accuracy phase cycle enable consumer count\n");
> + seq_puts(s, "-------------------------------------------------------------------------------------------------------------------------------------------\n");
>
> clk_prepare_lock();
>
> --
> 2.7.4
>
Hi Stephen,
Please review the above patch. Here we have made the changes as per your
review points.
Note: The example format in commit meassage is getting changed during
copy paste but we are getting proper formatted and parsable output on
actual target.
Regards,
Vishal
Powered by blists - more mailing lists