[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220822191957.28546-2-Sergey.Semin@baikalelectronics.ru>
Date: Mon, 22 Aug 2022 22:19:44 +0300
From: Serge Semin <Sergey.Semin@...kalelectronics.ru>
To: Michal Simek <michal.simek@...inx.com>,
Borislav Petkov <bp@...en8.de>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Tony Luck <tony.luck@...el.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Manish Narani <manish.narani@...inx.com>
CC: Serge Semin <Sergey.Semin@...kalelectronics.ru>,
Serge Semin <fancer.lancer@...il.com>,
Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
Michail Ivanov <Michail.Ivanov@...kalelectronics.ru>,
Pavel Parkhomenko <Pavel.Parkhomenko@...kalelectronics.ru>,
Punnaiah Choudary Kalluri
<punnaiah.choudary.kalluri@...inx.com>,
Dinh Nguyen <dinguyen@...nel.org>,
James Morse <james.morse@....com>,
Robert Richter <rric@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-edac@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH 01/13] dt-bindings: memory: snps: Extend schema with IRQs/resets/clocks props
First of all the DW uMCTL2 DDRC IP-core supports the individual IRQ lines
for each standard event: ECC Corrected Error, ECC Uncorrected Error, ECC
Address Protection, Scrubber-Done signal, DFI Parity/CRC Error. It's
possible that the platform engineers merge them up in the IRQ controller
level. So let's add both configuration support to the DT-schema.
Secondly each IP-core interface is supplied with a clock source like APB
reference clock, AXI-ports clock, main DDRC core reference clock and
Scrubber low-power clock. In addition to that each clock domain can have a
dedicated reset signal. Let's add the properties for at least the denoted
clock sources and the corresponding reset controls.
Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
---
.../snps,dw-umctl2-ddrc.yaml | 65 +++++++++++++++++--
1 file changed, 60 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
index 787d91d64eee..8db92210cfe1 100644
--- a/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
@@ -13,13 +13,13 @@ maintainers:
description: |
Synopsys DesignWare Enhanced uMCTL2 DDR Memory Controller is cappable of
- working with DDR devices up to (LP)DDR4 protocol. It can be equipped
+ working with DDR devices upporting to (LP)DDR4 protocol. It can be equipped
with SEC/DEC ECC feature if DRAM data bus width is either 16-bits or
32-bits or 64-bits wide.
- The ZynqMP DDR controller is based on the DW uMCTL2 v2.40a controller.
- It has an optional SEC/DEC ECC support in 64-bit and 32-bit bus width
- configurations.
+ For instance the ZynqMP DDR controller is based on the DW uMCTL2 v2.40a
+ controller. It has an optional SEC/DEC ECC support in 64-bit and 32-bit
+ bus width configurations.
properties:
compatible:
@@ -28,11 +28,55 @@ properties:
- xlnx,zynqmp-ddrc-2.40a
interrupts:
- maxItems: 1
+ description:
+ DW uMCTL2 DDRC IP-core provides individual IRQ signal for each event":"
+ ECC Corrected Error, ECC Uncorrected Error, ECC Address Protection,
+ Scrubber-Done signal, DFI Parity/CRC Error. Some platforms may have the
+ signals merged before they reach the IRQ controller or have some of them
+ absent in case if the corresponding feature is unavailable/disabled.
+ minItems: 1
+ maxItems: 5
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 5
+ oneOf:
+ - description: Common ECC CE/UE/Scrubber/DFI Errors IRQ
+ items:
+ - const: ecc
+ - description: Individual ECC CE/UE/Scrubber/DFI Errors IRQs
+ items:
+ enum: [ ecc_ce, ecc_ue, ecc_ap, ecc_sbr, dfi_e ]
reg:
maxItems: 1
+ clocks:
+ description:
+ A standard set of the clock sources contains CSRs bus clock, AXI-ports
+ reference clock, DDRC core clock, Scrubber standalone clock
+ (synchronous to the DDRC clock).
+ minItems: 1
+ maxItems: 4
+
+ clock-names:
+ minItems: 1
+ maxItems: 4
+ items:
+ enum: [ pclk, aclk, core, sbr ]
+
+ resets:
+ description:
+ Each clock domain can have separate reset signal.
+ minItems: 1
+ maxItems: 4
+
+ reset-names:
+ minItems: 1
+ maxItems: 4
+ items:
+ enum: [ prst, arst, core, sbr ]
+
required:
- compatible
- reg
@@ -48,4 +92,15 @@ examples:
interrupt-parent = <&gic>;
interrupts = <0 112 4>;
};
+ - |
+ memory-controller@...70000 {
+ compatible = "snps,ddrc-3.80a";
+ reg = <0x3d400000 0x400000>;
+
+ interrupts = <0 147 4>, <0 148 4>, <0 149 4>, <0 150 4>;
+ interrupt-names = "ecc_ce", "ecc_ue", "ecc_sbr", "dfi_e";
+
+ clocks = <&rcu 0>, <&rcu 5>, <&rcu 6>, <&rcu 7>;
+ clock-names = "pclk", "aclk", "core", "sbr";
+ };
...
--
2.35.1
Powered by blists - more mailing lists