[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20220822054051.2941282-1-piyush.mehta@amd.com>
Date: Mon, 22 Aug 2022 11:10:51 +0530
From: Piyush Mehta <piyush.mehta@....com>
To: <peter.chen@...nel.org>, <gregkh@...uxfoundation.org>
CC: <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<git@....com>, <michal.simek@....com>,
<siva.durga.prasad.paladugu@....com>,
<radhey.shyam.pandey@....com>,
Piyush Mehta <piyush.mehta@...inx.com>,
Piyush Mehta <piyush.mehta@....com>
Subject: [PATCH] usb: chipidea: Add support for VBUS control with PHY
From: Piyush Mehta <piyush.mehta@...inx.com>
Some platforms make use of VBUS control over PHY which means controller
driver has to access PHY registers to turn on/off VBUS line.This patch
adds support for such platforms in chipidea.
Flag 'CI_HDRC_PHY_VBUS_CONTROL' added to support VBus control feature.
Signed-off-by: Piyush Mehta <piyush.mehta@...inx.com>
Signed-off-by: Piyush Mehta <piyush.mehta@....com>
Acked-by: Peter Chen <peter.chen@...nel.org>
---
Note: Due to email sending issue, I am resending the patch with peter ACK.
---
drivers/usb/chipidea/ci_hdrc_usb2.c | 1 +
drivers/usb/chipidea/host.c | 7 +++++++
drivers/usb/chipidea/otg_fsm.c | 7 +++++++
include/linux/usb/chipidea.h | 1 +
4 files changed, 16 insertions(+)
diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c
index 89e1d82d739b..dc86b12060b5 100644
--- a/drivers/usb/chipidea/ci_hdrc_usb2.c
+++ b/drivers/usb/chipidea/ci_hdrc_usb2.c
@@ -30,6 +30,7 @@ static const struct ci_hdrc_platform_data ci_default_pdata = {
static const struct ci_hdrc_platform_data ci_zynq_pdata = {
.capoffset = DEF_CAPOFFSET,
+ .flags = CI_HDRC_PHY_VBUS_CONTROL,
};
static const struct ci_hdrc_platform_data ci_zevio_pdata = {
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index bdc3885c0d49..bc3634a54c6b 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -63,6 +63,13 @@ static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
priv->enabled = enable;
}
+ if (ci->platdata->flags & CI_HDRC_PHY_VBUS_CONTROL) {
+ if (enable)
+ usb_phy_vbus_on(ci->usb_phy);
+ else
+ usb_phy_vbus_off(ci->usb_phy);
+ }
+
if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) {
/*
* Marvell 28nm HSIC PHY requires forcing the port to HS mode.
diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c
index 6ed4b00dba96..5ed9164c2a0b 100644
--- a/drivers/usb/chipidea/otg_fsm.c
+++ b/drivers/usb/chipidea/otg_fsm.c
@@ -471,6 +471,10 @@ static void ci_otg_drv_vbus(struct otg_fsm *fsm, int on)
return;
}
}
+
+ if (ci->platdata->flags & CI_HDRC_PHY_VBUS_CONTROL)
+ usb_phy_vbus_on(ci->usb_phy);
+
/* Disable data pulse irq */
hw_write_otgsc(ci, OTGSC_DPIE, 0);
@@ -480,6 +484,9 @@ static void ci_otg_drv_vbus(struct otg_fsm *fsm, int on)
if (ci->platdata->reg_vbus)
regulator_disable(ci->platdata->reg_vbus);
+ if (ci->platdata->flags & CI_HDRC_PHY_VBUS_CONTROL)
+ usb_phy_vbus_off(ci->usb_phy);
+
fsm->a_bus_drop = 1;
fsm->a_bus_req = 0;
}
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index edf3342507f1..ee38835ed77c 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -62,6 +62,7 @@ struct ci_hdrc_platform_data {
#define CI_HDRC_REQUIRES_ALIGNED_DMA BIT(13)
#define CI_HDRC_IMX_IS_HSIC BIT(14)
#define CI_HDRC_PMQOS BIT(15)
+#define CI_HDRC_PHY_VBUS_CONTROL BIT(16)
enum usb_dr_mode dr_mode;
#define CI_HDRC_CONTROLLER_RESET_EVENT 0
#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
--
2.25.1
Powered by blists - more mailing lists