linux-kernel - Re: [PATCH v11 04/13] PCI: Allow PASID only when ACS enforced on upstreaming path

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <3751881a-7478-c1cb-4d77-a9483fbeed83@linux.intel.com>
Date:   Mon, 22 Aug 2022 15:43:18 +0800
From:   Ethan Zhao <haifeng.zhao@...ux.intel.com>
To:     Bjorn Helgaas <helgaas@...nel.org>,
        Baolu Lu <baolu.lu@...ux.intel.com>
Cc:     Joerg Roedel <joro@...tes.org>, Jason Gunthorpe <jgg@...dia.com>,
        Christoph Hellwig <hch@...radead.org>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Kevin Tian <kevin.tian@...el.com>,
        Ashok Raj <ashok.raj@...el.com>, Will Deacon <will@...nel.org>,
        Robin Murphy <robin.murphy@....com>,
        Jean-Philippe Brucker <jean-philippe@...aro.com>,
        Dave Jiang <dave.jiang@...el.com>,
        Vinod Koul <vkoul@...nel.org>,
        Eric Auger <eric.auger@...hat.com>,
        Liu Yi L <yi.l.liu@...el.com>,
        Jacob jun Pan <jacob.jun.pan@...el.com>,
        Zhangfei Gao <zhangfei.gao@...aro.org>,
        Zhu Tony <tony.zhu@...el.com>, iommu@...ts.linux.dev,
        linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v11 04/13] PCI: Allow PASID only when ACS enforced on
 upstreaming path


在 2022/8/19 7:00, Bjorn Helgaas 写道:
> On Thu, Aug 18, 2022 at 07:53:15PM +0800, Baolu Lu wrote:
>> On 2022/8/18 05:17, Bjorn Helgaas wrote:
>>> On Wed, Aug 17, 2022 at 09:20:15AM +0800, Lu Baolu wrote:
>>>> Some configurations of the PCI fabric will route device originated TLP
>>>> packets based on the memory addresses.
>>> This makes it sound like a few unusual configurations will route TLPs
>>> based on memory addresses, but address routing is the default for all
>>> PCIe Memory Requests, and ACS provides a way to override that default.
>>>
>>>> These configurations are incompatible with PASID as the PASID
>>>> packets form a distinct address space.
>>> I would say "the Requester ID/PASID combination forms a distinct
>>> address space."
>>>
>>>> For instance, any configuration where switches are present
>>>> without ACS enabled is incompatible.
>>>>
>>>> This enhances the pci_enable_pasid() interface by requiring the ACS to
>>>> support Source Validation, Request Redirection, Completer Redirection,
>>>> and Upstream Forwarding. This effectively means that devices cannot
>>>> spoof their requester ID, requests and completions cannot be redirected,
>>>> and all transactions are forwarded upstream, even as it passes through a
>>>> bridge where the target device is downstream.
>>> I think your patch actually requires all those features to be not just
>>> "supported" but actually*enabled*  for the entire path leading to the
>>> device.
>>>
>>> To use the terms from the spec:
>>>
>>>     "P2P Request Redirect"
>>>     "P2P Completion Redirect"
>>>     "Requester ID, Requests, and Completions"
>>>
>>> and maybe something like:
>>>
>>>     ... even if the TLP looks like a P2P Request because its memory
>>>     address (ignoring the PASID) would fall in a bridge window and would
>>>     normally be routed downstream.
>> Thank you for the suggestions. I will rephrase the commit message
>> accordingly like this:
>>
>>
>> PCI: Allow PASID only when ACS enforced on upstreaming path
> PCI: Enable PASID only when ACS RR & UF enabled on upstream path
>
> The Requester ID/Process Address Space ID (PASID) combination
> identifies an address space distinct from the PCI bus address space,
> e.g., an address space defined by an IOMMU.
>
> But the PCIe fabric routes Memory Requests based on the TLP address,
> ignoring any PASID (PCIe r6.0, sec 2.2.10.4), so a TLP with PASID that
> *should* go upstream to the IOMMU may instead be routed as a P2P
> Request if its address falls in a bridge window.
>
> To ensure that all Memory Requests with PASID are routed upstream,
> only enable PASID if ACS P2P Request Redirect and Upstream Forwarding
> are enabled for the path leading to the device.

Seeing these comments, my questions gone.

Thanks Bjorn !

>> The PCIe fabric routes TLPs based on memory addresses for all PCIe Memory
>> Requests regardless of whether TLPs have PASID prefixes. This is stated in
>> section "2.2.10.2 End-End TLP Prefix Processing" of the specification:
>>
>>    The presence of an End-End TLP Prefix does not alter the routing of a
>>    TLP. TLPs are routed based on the routing rules covered in Section
>>    2.2.4 .
>>
>> As the Requester ID/PASID combination forms a distinct address space. The
>> memory address based routing is not compatible for PASID TLPs anymore.
>> Therefore we have to rely on ACS to override that default.
>>
>> This enhances pci_enable_pasid() interface by requiring the ACS features
>> to be enabled for the entire path leading to the device. So that even if
>> the TLP looks like a P2P Request because its memory address (ignoring the
>> PASID) would fall in a bridge window and would normally be routed
>> downstream.
>>
>> Best regards,
>> baolu

-- 
"firm, enduring, strong, and long-lived"