linux-kernel - [PATCH net-next v2 08/17] net: dsa: microchip: KSZ9893: do not write to not supported Output Clock Control Register

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 22 Aug 2022 13:03:49 +0200
From:   Oleksij Rempel <o.rempel@...gutronix.de>
To:     Woojung Huh <woojung.huh@...rochip.com>,
        UNGLinuxDriver@...rochip.com, Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>
Cc:     Oleksij Rempel <o.rempel@...gutronix.de>, kernel@...gutronix.de,
        linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Subject: [PATCH net-next v2 08/17] net: dsa: microchip: KSZ9893: do not write to not supported Output Clock Control Register

This issue was detected after adding regmap register access validation.
KSZ9893 compatible chips do not have "Output Clock Control Register 0x0103".
So, avoid writing to it.

Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
 drivers/net/dsa/microchip/ksz9477.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 13c4ded84b1db..62a03b3b918df 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -193,6 +193,11 @@ int ksz9477_reset_switch(struct ksz_device *dev)
 	ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
 	ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
 
+	/* KSZ9893 compatible chips do not support refclk configuration */
+	if (dev->chip_id == KSZ9893_CHIP_ID ||
+	    dev->chip_id == KSZ8563_CHIP_ID)
+		return 0;
+
 	data8 = SW_ENABLE_REFCLKO;
 	if (dev->synclko_disable)
 		data8 = 0;
-- 
2.30.2