linux-kernel - [PATCH 5.4 314/389] pinctrl: sunxi: Add I/O bias setting for H6 R-PIO

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220823080128.679233996@linuxfoundation.org>
Date:   Tue, 23 Aug 2022 10:26:32 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Jernej Skrabec <jernej.skrabec@...il.com>,
        Heiko Stuebner <heiko@...ech.de>,
        Samuel Holland <samuel@...lland.org>,
        Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH 5.4 314/389] pinctrl: sunxi: Add I/O bias setting for H6 R-PIO

From: Samuel Holland <samuel@...lland.org>

commit fc153c8f283bf5925615195fc9d4056414d7b168 upstream.

H6 requires I/O bias configuration on both of its PIO devices.
Previously it was only done for the main PIO.

The setting for Port L is at bit 0, so the bank calculation needs to
account for the pin base. Otherwise the wrong bit is used.

Fixes: cc62383fcebe ("pinctrl: sunxi: Support I/O bias voltage setting on H6")
Reviewed-by: Jernej Skrabec <jernej.skrabec@...il.com>
Tested-by: Heiko Stuebner <heiko@...ech.de>
Signed-off-by: Samuel Holland <samuel@...lland.org>
Link: https://lore.kernel.org/r/20220713025233.27248-3-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c |    1 +
 drivers/pinctrl/sunxi/pinctrl-sunxi.c       |    7 ++++---
 2 files changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c
@@ -105,6 +105,7 @@ static const struct sunxi_pinctrl_desc s
 	.npins = ARRAY_SIZE(sun50i_h6_r_pins),
 	.pin_base = PL_BASE,
 	.irq_banks = 2,
+	.io_bias_cfg_variant = BIAS_VOLTAGE_PIO_POW_MODE_SEL,
 };
 
 static int sun50i_h6_r_pinctrl_probe(struct platform_device *pdev)
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -616,7 +616,7 @@ static int sunxi_pinctrl_set_io_bias_cfg
 					 unsigned pin,
 					 struct regulator *supply)
 {
-	unsigned short bank = pin / PINS_PER_BANK;
+	unsigned short bank;
 	unsigned long flags;
 	u32 val, reg;
 	int uV;
@@ -632,6 +632,9 @@ static int sunxi_pinctrl_set_io_bias_cfg
 	if (uV == 0)
 		return 0;
 
+	pin -= pctl->desc->pin_base;
+	bank = pin / PINS_PER_BANK;
+
 	switch (pctl->desc->io_bias_cfg_variant) {
 	case BIAS_VOLTAGE_GRP_CONFIG:
 		/*
@@ -649,8 +652,6 @@ static int sunxi_pinctrl_set_io_bias_cfg
 		else
 			val = 0xD; /* 3.3V */
 
-		pin -= pctl->desc->pin_base;
-
 		reg = readl(pctl->membase + sunxi_grp_config_reg(pin));
 		reg &= ~IO_BIAS_MASK;
 		writel(reg | val, pctl->membase + sunxi_grp_config_reg(pin));