[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <23552842.6Emhk5qWAg@diego>
Date: Tue, 23 Aug 2022 13:53:49 +0200
From: Heiko Stübner <heiko@...ech.de>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Vinod Koul <vkoul@...nel.org>,
Chris Ruehl <chris.ruehl@...ys.com.hk>,
Jensen Huang <jensenhuang@...endlyarm.com>,
Brian Norris <briannorris@...omium.org>,
Doug Anderson <dianders@...omium.org>
Cc: Jensen Huang <jensenhuang@...endlyarm.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] arm64: dts: rockchip: add enable-strobe-pulldown to emmc phy on rk3399
Am Montag, 22. August 2022, 09:41:39 CEST schrieb Jensen Huang:
> Internal pull-down for strobe line (GRF_EMMCPHY_CON2[9]) was disabled
> by commit 8b5c2b45b8f0, which causes I/O error in HS400 mode.
>
> Tested on NanoPC-T4.
>
> Fixes: 8b5c2b45b8f0 ("phy: rockchip: set pulldown for strobe line in dts")
> Signed-off-by: Jensen Huang <jensenhuang@...endlyarm.com>
ok, so this looks like it restores previous functionality.
I'm just wondering as the "offending" patch is from 2020, why this
only turns up now. Any ideas?
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> index 9d5b0e8c9cca..9491cafbbaa3 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -1561,6 +1561,7 @@ emmc_phy: phy@...0 {
> clock-names = "emmcclk";
> drive-impedance-ohm = <50>;
> #phy-cells = <0>;
> + rockchip,enable-strobe-pulldown;
> status = "disabled";
> };
>
>
Powered by blists - more mailing lists