[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220823174158.45579-1-cmirabil@redhat.com>
Date: Tue, 23 Aug 2022 13:41:53 -0400
From: Charles Mirabile <cmirabil@...hat.com>
To: linux-kernel@...r.kernel.org
Cc: Charles Mirabile <cmirabil@...hat.com>,
Peter Robinson <pbrobinson@...il.com>,
Serge Schneider <serge@...pberrypi.org>,
Stefan Wahren <stefan.wahren@...e.com>,
Nicolas Saenz Julienne <nicolassaenzj@...il.com>,
Mattias Brugger <mbrugger@...e.com>,
linux-rpi-kernel@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, rh-kdlp@...glegroups.com,
Joel Slebodnick <jslebodn@...hat.com>,
Joel Savitz <jsavitz@...hat.com>
Subject: [PATCH v10 0/6] Raspberry Pi Sense HAT driver
This patch series adds a set of drivers for operating the Sense HAT
peripheral device. This board is an add on for the Raspberry Pi that is
designed to connect using the GPIO connector and communicate via I2C.
It features:
- a joystick
- an 8x8 RGB LED matrix display
- a whole bunch of environmental sensors with their own drivers
(those are already in upstream Linux)
This is a refactor of the work of Serge Schneider, the author of a
version of this driver that is currently in the Raspberry Pi downstream
kernel. We modified his code to make it suitable for upstream Linux.
A couple of tests are available for the driver in the test folder in
this repo: https://github.com/underground-software/sensehat.git
- sensehat_joystick_test logs the input events from the
joystick to the console
- sensehat_display_test displays various solid colors on
the LED panel.
- full_sensehat_test displays a single lit cell that can be
moved with the joystick. Pressing the joystick ends the
program.
For more information about the Sense HAT, visit:
https://www.raspberrypi.org/products/sense-hat/
Changes since v9:
- The driver for the sensehat joystick was accepted upstream so
it is no longer included in this patchset.
- Some of the people involved in the development of earlier
versions of these patches are no longer involved in the project
so they have been removed from the list of maintainers and the
patches.
- The code is completely unchanged and so based on the discussions
from version 9 of the patches, it should be ready to be merged.
My appologies for the long delay between v9 and v10 especially given the
fact that there are no changes to the code. We appreciate the maintainers'
patience and guidance throughout all 10 versions of this sensehat patchset,
and we are excited for this driver to hopefully be fully accepted.
Best - Charlie
Co-developed-by: Joel Slebodnick <jslebodn@...hat.com>
Signed-off-by: Joel Slebodnick <jslebodn@...hat.com>
Co-developed-by: Joel Savitz <jsavitz@...hat.com>
Signed-off-by: Joel Savitz <jsavitz@...hat.com>
Signed-off-by: Charles Mirabile <cmirabil@...hat.com>
Charles Mirabile (5):
drivers/mfd: sensehat: Add Raspberry Pi Sense HAT to simple_mfd_i2c
drivers/auxdisplay: sensehat: Raspberry Pi Sense HAT display driver
dt-bindings: mfd: sensehat: Add Raspberry Pi Sense HAT schema
MAINTAINERS: Add sensehat driver authors to MAINTAINERS
DO NOT MERGE: full sensehat device tree overlay for raspberry pi 4
.../raspberrypi,sensehat-display.yaml | 26 +++
.../input/raspberrypi,sensehat-joystick.yaml | 31 +++
.../bindings/mfd/raspberrypi,sensehat.yaml | 57 +++++
MAINTAINERS | 10 +
drivers/auxdisplay/Kconfig | 8 +
drivers/auxdisplay/Makefile | 1 +
drivers/auxdisplay/sensehat-display.c | 205 ++++++++++++++++++
drivers/mfd/simple-mfd-i2c.c | 1 +
sensehat.dtbs | 52 +++++
9 files changed, 391 insertions(+)
create mode 100644 Documentation/devicetree/bindings/auxdisplay/raspberrypi,sensehat-display.yaml
create mode 100644 Documentation/devicetree/bindings/input/raspberrypi,sensehat-joystick.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/raspberrypi,sensehat.yaml
create mode 100644 drivers/auxdisplay/sensehat-display.c
create mode 100644 sensehat.dtbs
--
2.31.1
Powered by blists - more mailing lists