linux-kernel - [PATCH net-next v3 13/17] net: dsa: microchip: ksz9477: use internal_phy instead of phy_port

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220823080231.2466017-14-o.rempel@pengutronix.de>
Date:   Tue, 23 Aug 2022 10:02:27 +0200
From:   Oleksij Rempel <o.rempel@...gutronix.de>
To:     Woojung Huh <woojung.huh@...rochip.com>,
        UNGLinuxDriver@...rochip.com, Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>
Cc:     Oleksij Rempel <o.rempel@...gutronix.de>, kernel@...gutronix.de,
        linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Subject: [PATCH net-next v3 13/17] net: dsa: microchip: ksz9477: use internal_phy instead of phy_port_cnt

With code refactoring was introduced new variable internal_phy. Let's
use it.

Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
 drivers/net/dsa/microchip/ksz9477.c | 20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index cb5bd0ceb8df4..2982c8cb0983c 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -291,7 +291,7 @@ int ksz9477_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data)
 	 * For RGMII PHY there is no way to access it so the fixed PHY should
 	 * be used.  For SGMII PHY the supporting code will be added later.
 	 */
-	if (addr >= dev->phy_port_cnt) {
+	if (!dev->info->internal_phy[addr]) {
 		struct ksz_port *p = &dev->ports[addr];
 
 		switch (reg) {
@@ -339,7 +339,7 @@ int ksz9477_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data)
 int ksz9477_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val)
 {
 	/* No real PHY after this. */
-	if (addr >= dev->phy_port_cnt)
+	if (!dev->info->internal_phy[addr])
 		return 0;
 
 	return ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
@@ -888,7 +888,7 @@ static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port)
 	phy_interface_t interface;
 	bool gbit;
 
-	if (port < dev->phy_port_cnt)
+	if (dev->info->internal_phy[port])
 		return PHY_INTERFACE_MODE_NA;
 
 	gbit = ksz_get_gbit(dev, port);
@@ -995,7 +995,7 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 	/* enable 802.1p priority */
 	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
 
-	if (port < dev->phy_port_cnt) {
+	if (dev->info->internal_phy[port]) {
 		/* do not force flow control */
 		ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
 			     PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
@@ -1018,7 +1018,7 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 	ksz9477_cfg_port_member(dev, port, member);
 
 	/* clear pending interrupts */
-	if (port < dev->phy_port_cnt)
+	if (dev->info->internal_phy[port])
 		ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16);
 }
 
@@ -1081,7 +1081,7 @@ void ksz9477_config_cpu_port(struct dsa_switch *ds)
 
 		ksz_port_stp_state_set(ds, i, BR_STATE_DISABLED);
 		p->on = 1;
-		if (i < dev->phy_port_cnt)
+		if (dev->info->internal_phy[i])
 			p->phy = 1;
 		if (dev->chip_id == 0x00947700 && i == 6) {
 			p->sgmii = 1;
@@ -1177,15 +1177,9 @@ int ksz9477_switch_init(struct ksz_device *dev)
 	if (ret)
 		return ret;
 
-	/* Number of ports can be reduced depending on chip. */
-	dev->phy_port_cnt = 5;
-
-	if (dev->chip_id == KSZ9893_CHIP_ID) {
+	if (dev->chip_id == KSZ9893_CHIP_ID)
 		dev->features |= IS_9893;
 
-		dev->phy_port_cnt = 2;
-	}
-
 	return 0;
 }
 
-- 
2.30.2