Message-ID: <CAA8EJprhwnMDLnWyfy3+TXG4cfeCCGGaaLqBTPn+UFgm7en8Fg@mail.gmail.com>
Date:   Wed, 24 Aug 2022 11:25:18 +0300
From:   Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To:     Abhinav Kumar <quic_abhinavk@...cinc.com>
Cc:     Kuogee Hsieh <quic_khsieh@...cinc.com>, robdclark@...il.com,
        sean@...rly.run, swboyd@...omium.org, dianders@...omium.org,
        vkoul@...nel.org, daniel@...ll.ch, airlied@...ux.ie,
        agross@...nel.org, bjorn.andersson@...aro.org,
        quic_sbillaka@...cinc.com, linux-arm-msm@...r.kernel.org,
        linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
        quic_aravindh@...cinc.com, freedreno@...ts.freedesktop.org
Subject: Re: [PATCH] drm/msm/dp: add atomic_check to bridge ops

On Wed, 24 Aug 2022 at 01:59, Abhinav Kumar <quic_abhinavk@...cinc.com> wrote:
>
>
>
> On 8/23/2022 3:41 PM, Dmitry Baryshkov wrote:
> > On Wed, 24 Aug 2022 at 01:07, Abhinav Kumar <quic_abhinavk@...cinc.com> wrote:
> >> On 8/22/2022 11:33 AM, Dmitry Baryshkov wrote:
> >>> On 22/08/2022 20:32, Abhinav Kumar wrote:
> >>>>
> >>>>
> >>>> On 8/22/2022 9:49 AM, Dmitry Baryshkov wrote:
> >>>>> On 22/08/2022 19:38, Abhinav Kumar wrote:
> >>>>>> Hi Dmitry
> >>>>>>
> >>>>>> On 8/22/2022 9:18 AM, Dmitry Baryshkov wrote:
> >>>>>>> On 17/08/2022 21:01, Kuogee Hsieh wrote:
> >>>>>>>> DRM commit_tails() will disable downstream crtc/encoder/bridge if
> >>>>>>>> both disable crtc is required and crtc->active is set before pushing
> >>>>>>>> a new frame downstream.
> >>>>>>>>
> >>>>>>>> There is a rare case that user space display manager issue an extra
> >>>>>>>> screen update immediately followed by close DRM device while down
> >>>>>>>> stream display interface is disabled. This extra screen update will
> >>>>>>>> timeout due to the downstream interface is disabled but will cause
> >>>>>>>> crtc->active be set. Hence the followed commit_tails() called by
> >>>>>>>> drm_release() will pass the disable downstream crtc/encoder/bridge
> >>>>>>>> conditions checking even downstream interface is disabled.
> >>>>>>>> This cause the crash to happen at dp_bridge_disable() due to it
> >>>>>>>> trying
> >>>>>>>> to access the main link register to push the idle pattern out
> >>>>>>>> while main
> >>>>>>>> link clocks is disabled.
> >>>>>>>>
> >>>>>>>> This patch adds atomic_check to prevent the extra frame will not
> >>>>>>>> be pushed down if display interface is down so that crtc->active
> >>>>>>>> will not be set neither. This will fail the conditions checking
> >>>>>>>> of disabling down stream crtc/encoder/bridge which prevent
> >>>>>>>> drm_release() from calling dp_bridge_disable() so that crash
> >>>>>>>> at dp_bridge_disable() prevented.
> >>>>>>>
> >>>>>>> I must admit I had troubles parsing this description. However if I
> >>>>>>> got you right, I think the check that the main link clock is
> >>>>>>> running in the dp_bridge_disable() or dp_ctrl_push_idle() would be
> >>>>>>> a better fix.
> >>>>>>
> >>>>>> Originally, thats what was posted
> >>>>>> https://patchwork.freedesktop.org/patch/496984/.
> >>>>>
> >>>>> This patch is also not so correct from my POV. It checks for the hpd
> >>>>> status, while in reality it should check for main link clocks being
> >>>>> enabled.
> >>>>>
> >>>>
> >>>> We can push another fix to check for the clk state instead of the hpd
> >>>> status. But I must say we are again just masking something which the
> >>>> fwk should have avoided isnt it?
> >>>>
> >>>> As per the doc in the include/drm/drm_bridge.h it says,
> >>>>
> >>>> "*
> >>>>    * The bridge can assume that the display pipe (i.e. clocks and timing
> >>>>    * signals) feeding it is still running when this callback is called.
> >>>>    *"
> >>>
> >>> Yes, that's what I meant about this chunk begging to go to the core. In
> >>> my opinion, if we are talking about the disconnected sinks, it is the
> >>> framework who should disallow submitting the frames to the disconnected
> >>> sinks.
> >>>
> >>>>
> >>>> By adding an extra layers of protection in the driver, we are just
> >>>> avoiding another issue but the commit should not have been issued in
> >>>> the first place.
> >>>>
> >>>> So shouldnt we do both then? That is add protection to check if clock
> >>>> is ON and also, reject commits when display is disconnected.
> >>>>
> >>>>>>
> >>>>>> Then it seemed like we were just protecting against an issue in the
> >>>>>> framework which was allowing the frames to be pushed even after the
> >>>>>> display was disconnected. The DP driver did send out the disconnect
> >>>>>> event correctly and as per the logs, this frame came down after that
> >>>>>> and the DRM fwk did allow it.
> >>>>>>
> >>>>>> So after discussing on IRC with Rob, we came up with this approach that
> >>>>>> if the display is not connected, then atomic_check should fail. That
> >>>>>> way the commit will not happen.
> >>>>>>
> >>>>>> Just seemed a bit cleaner instead of adding all our protections.
> >>>>>
> >>>>> The check to fail atomic_check if display is not connected seems out
> >>>>> of place. In its current way it begs go to the upper layer,
> >>>>> forbidding using disconnected sinks for all the drivers. There is
> >>>>> nothing special in the MSM DP driver with respect to the HPD events
> >>>>> processing and failing atomic_check() based on that.
> >>>>>
> >>>>
> >>>> Why all the drivers? This is only for MSM DP bridge.
> >>>
> >>> Yes, we change the MSM DRM driver. But the check is generic enough. I'm
> >>> not actually insisting on pushing the check to the core, just trying to
> >>> understand the real cause here.
> >>>
> >>>>
> >>
> >> I actually wanted to push this to the core and thats what I had
> >> originally asked on IRC because it does seem to be generic enough that
> >> it should belong to the core but after discussion with Rob on freedreno,
> >> he felt this was a better approach because for some of the legacy
> >> connectors like VGA, this need not belong to the DRM core, hence we went
> >> with this approach.
> >
> > It might be better to whitelist such connectors (S-VIDEO/composite
> > comes to my mind rather than VGA).
>
> I am fine with that approach, if Rob is onboard with that.
>
> >
> >>>>>>>> SError Interrupt on CPU7, code 0x00000000be000411 -- SError
> >>>>>>>> CPU: 7 PID: 3878 Comm: Xorg Not tainted 5.19.0-stb-cbq #19
> >>>>>>>> Hardware name: Google Lazor (rev3 - 8) (DT)
> >>>>>>>> pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> >>>>>>>> pc : __cmpxchg_case_acq_32+0x14/0x2c
> >>>>>>>> lr : do_raw_spin_lock+0xa4/0xdc
> >>>>>>>> sp : ffffffc01092b6a0
> >>>>>>>> x29: ffffffc01092b6a0 x28: 0000000000000028 x27: 0000000000000038
> >>>>>>>> x26: 0000000000000004 x25: ffffffd2973dce48 x24: 0000000000000000
> >>>>>>>> x23: 00000000ffffffff x22: 00000000ffffffff x21: ffffffd2978d0008
> >>>>>>>> x20: ffffffd2978d0008 x19: ffffff80ff759fc0 x18: 0000000000000000
> >>>>>>>> x17: 004800a501260460 x16: 0441043b04600438 x15: 04380000089807d0
> >>>>>>>> x14: 07b0089807800780 x13: 0000000000000000 x12: 0000000000000000
> >>>>>>>> x11: 0000000000000438 x10: 00000000000007d0 x9 : ffffffd2973e09e4
> >>>>>>>> x8 : ffffff8092d53300 x7 : ffffff808902e8b8 x6 : 0000000000000001
> >>>>>>>> x5 : ffffff808902e880 x4 : 0000000000000000 x3 : ffffff80ff759fc0
> >>>>>>>> x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffffff80ff759fc0
> >>>>>>>> Kernel panic - not syncing: Asynchronous SError Interrupt
> >>>>>>>> CPU: 7 PID: 3878 Comm: Xorg Not tainted 5.19.0-stb-cbq #19
> >>>>>>>> Hardware name: Google Lazor (rev3 - 8) (DT)
> >>>>>>>> Call trace:
> >>>>>>>>    dump_backtrace.part.0+0xbc/0xe4
> >>>>>>>>    show_stack+0x24/0x70
> >>>>>>>>    dump_stack_lvl+0x68/0x84
> >>>>>>>>    dump_stack+0x18/0x34
> >>>>>>>>    panic+0x14c/0x32c
> >>>>>>>>    nmi_panic+0x58/0x7c
> >>>>>>>>    arm64_serror_panic+0x78/0x84
> >>>>>>>>    do_serror+0x40/0x64
> >>>>>>>>    el1h_64_error_handler+0x30/0x48
> >>>>>>>>    el1h_64_error+0x68/0x6c
> >>>>>>>>    __cmpxchg_case_acq_32+0x14/0x2c
> >>>>>>>>    _raw_spin_lock_irqsave+0x38/0x4c
> >>>
> >>> You know, after re-reading the trace, I could not help but notice that
> >>> the issue seems to be related to completion/timer/spinlock memory
> >>> becoming unavailable rather than disabling the main link clock.
> >>> See, the SError comes in the spin_lock path, not during register read.
> >>>
> >>> Thus I think the commit message is a bit misleading.
> >>>
> >>
> >> No, this issue is due to unclocked access. Please check this part of the
> >> stack:
> >
> > Well, if it were for the unlocked access, we would see SError on the
> > register access, wouldn't we? However in this case the SError comes
> > from the raw spinlock code.
>
> This is not uncommon. With unclocked access, we have seen in the past
> that sometimes the stack is off by one line. The fact that this issue
> got resolved even with the older version of the patch
> https://patchwork.freedesktop.org/patch/496984/ is pointing towards an
> unclocked access and not the dp/dp->ctrl memory pointers.

As far as I understood, the bug is reproducible. Just to make me feel
safe, can we please:
-  either have a trace which shows when the clocks are disabled (or not enabled)
- or make sure that keeping the mainlink clock on would also mitigate the issue?

>
> >
> >>   >>>>>>   wait_for_completion_timeout+0x2c/0x54
> >>   >>>>>>   dp_ctrl_push_idle+0x40/0x88
> >>   >>>>>>   dp_bridge_disable+0x24/0x30
> >>   >>>>>>   drm_atomic_bridge_chain_disable+0x90/0xbc
> >>   >>>>>>   drm_atomic_helper_commit_modeset_disables+0x198/0x444
> >>   >>>>>>   msm_atomic_commit_tail+0x1d0/0x374
> >>   >>>>>>   commit_tail+0x80/0x108
> >>   >>>>>>   drm_atomic_helper_commit+0x118/0x11c
> >>   >>>>>>   drm_atomic_commit+0xb4/0xe0
> >>   >>>>>>   drm_client_modeset_commit_atomic+0x184/0x224
> >>   >>>>>>   drm_client_modeset_commit_locked+0x58/0x160
> >>   >>>>>>   drm_client_modeset_commit+0x3c/0x64
> >>
> >>> Can we please get a trace checking which calls were actually made for
> >>> the dp bridge and if the dp/dp->ctrl memory pointers are correct?
> >>>
> >>> I do not see the dp_display_disable() being called. Maybe I just missed
> >>> the call.
> >>>
> >>
> >> Yes it is called, please refer to the above part of the stack that I
> >> have pasted.
> >
> > The stacktrace mentions dp_bridge_disable(), not dp_display_disable()
> > (which I asked for).
> >
>
> So whats happening here is the crash is happening in dp_bridge_disable().
>
> dp_display_disable() is called from post_disable() thats why it doesnt
> show up in the stack.
>

Yes. But the mainlink clocks are disabled in dp_display_disable()
that's why I'm asking if the function was called at all.


-- 
With best wishes
Dmitry

Powered by blists - more mailing lists