[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220824162321.GA2783649@bhelgaas>
Date: Wed, 24 Aug 2022 11:23:21 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: Baolu Lu <baolu.lu@...ux.intel.com>
Cc: Joerg Roedel <joro@...tes.org>, Jason Gunthorpe <jgg@...dia.com>,
Christoph Hellwig <hch@...radead.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Kevin Tian <kevin.tian@...el.com>,
Ashok Raj <ashok.raj@...el.com>, Will Deacon <will@...nel.org>,
Robin Murphy <robin.murphy@....com>,
Jean-Philippe Brucker <jean-philippe@...aro.com>,
Dave Jiang <dave.jiang@...el.com>,
Vinod Koul <vkoul@...nel.org>,
Eric Auger <eric.auger@...hat.com>,
Liu Yi L <yi.l.liu@...el.com>,
Jacob jun Pan <jacob.jun.pan@...el.com>,
Zhangfei Gao <zhangfei.gao@...aro.org>,
Zhu Tony <tony.zhu@...el.com>, iommu@...ts.linux.dev,
linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v11 04/13] PCI: Allow PASID only when ACS enforced on
upstreaming path
On Tue, Aug 23, 2022 at 03:05:53PM +0800, Baolu Lu wrote:
> On 2022/8/19 07:00, Bjorn Helgaas wrote:
> > PCI: Enable PASID only when ACS RR & UF enabled on upstream path
> >
> > The Requester ID/Process Address Space ID (PASID) combination
> > identifies an address space distinct from the PCI bus address space,
> > e.g., an address space defined by an IOMMU.
> >
> > But the PCIe fabric routes Memory Requests based on the TLP address,
> > ignoring any PASID (PCIe r6.0, sec 2.2.10.4), so a TLP with PASID that
> > *should* go upstream to the IOMMU may instead be routed as a P2P
> > Request if its address falls in a bridge window.
> >
> > To ensure that all Memory Requests with PASID are routed upstream,
> > only enable PASID if ACS P2P Request Redirect and Upstream Forwarding
> > are enabled for the path leading to the device.
>
> Yours is clear and straight-forward. I will update the patch with above.
> Thank you and very appreciated!
With the update to only require RR and UF and the commit log update,
Acked-by: Bjorn Helgaas <bhelgaas@...gle.com>
Thanks!
Powered by blists - more mailing lists