linux-kernel - [PATCH 0/7] arm64: dts: qcom: Fix broken regulator spec on RPMH boards

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220825164205.4060647-1-dianders@chromium.org>
Date:   Thu, 25 Aug 2022 09:41:58 -0700
From:   Douglas Anderson <dianders@...omium.org>
To:     Bjorn Andersson <bjorn.andersson@...aro.org>
Cc:     Andrew Halaney <ahalaney@...hat.com>,
        Mark Brown <broonie@...nel.org>,
        Douglas Anderson <dianders@...omium.org>,
        Andy Gross <agross@...nel.org>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...ainline.org>,
        Bhupesh Sharma <bhupesh.sharma@...aro.org>,
        Johan Hovold <johan+linaro@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...ainline.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Vinod Koul <vkoul@...nel.org>, devicetree@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 0/7] arm64: dts: qcom: Fix broken regulator spec on RPMH boards

Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") several boards were able to
change their regulator mode even though they had nothing listed in
"regulator-allowed-modes". After that commit (and fixes [1]) we'll be
stuck at the initial mode. Discussion of this (again, see [1]) has
resulted in the decision that the old dts files were wrong and should
be fixed to fully restore old functionality.

This series attempts to fix everyone. I've kept each board in a
separate patch to make stable / backports work easier.

Affected boards were found with:
  rpmh_users=$(git grep -l -i rpmh -- arch/arm*/boot/dts/qcom)
  set_modes=$(grep -l regulator-allow-set-load ${rpmh_users})
  but_no_allowed_modes=$(grep -l -v regulator-allowed-modes ${set_modes})

Fix was applied with:
  for f in ${but_no_allowed_modes}; do
    sed -i~ -e \
      's/^\(\s*\)regulator-allow-set-load;/\1regulator-allow-set-load;\n\1regulator-allowed-modes =\n\1    <RPMH_REGULATOR_MODE_LPM\n\1     RPMH_REGULATOR_MODE_HPM>;/'\
      $f
  done

Then results were manually inspected. In one board I removed a
"regulator-allow-set-load" from a fixed regulator since that was
clearly wrong.

[1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid


Douglas Anderson (7):
  arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed
  arm64: dts: qcom: sa8295p-adp: Specify which LDO modes are allowed
  arm64: dts: qcom: sc8280xp-crd: Specify which LDO modes are allowed
  arm64: dts: qcom: sc8280xp-thinkpad-x13s: Specify which LDO modes are
    allowed
  arm64: dts: qcom: sm8150-xperia-kumano: Specify which LDO modes are
    allowed
  arm64: dts: qcom: sm8250-xperia-edo: Specify which LDO modes are
    allowed
  arm64: dts: qcom: sm8350-hdk: Specify which LDO modes are allowed

 arch/arm64/boot/dts/qcom/sa8155p-adp.dts      | 13 +++++-
 arch/arm64/boot/dts/qcom/sa8295p-adp.dts      | 45 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts     | 33 ++++++++++++++
 .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 30 +++++++++++++
 .../dts/qcom/sm8150-sony-xperia-kumano.dtsi   |  6 +++
 .../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi |  6 +++
 arch/arm64/boot/dts/qcom/sm8350-hdk.dts       | 12 +++++
 7 files changed, 144 insertions(+), 1 deletion(-)

-- 
2.37.2.672.g94769d06f0-goog