| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220825214423.903672-15-michael@walle.cc>
Date: Thu, 25 Aug 2022 23:44:23 +0200
From: Michael Walle <michael@...le.cc>
To: Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Shawn Guo <shawnguo@...nel.org>, Li Yang <leoyang.li@....com>,
Rafał Miłecki <rafal@...ecki.pl>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Frank Rowand <frowand.list@...il.com>
Cc: linux-mtd@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
netdev@...r.kernel.org, Ahmad Fatoum <a.fatoum@...gutronix.de>,
Michael Walle <michael@...le.cc>
Subject: [PATCH v1 14/14] arm64: dts: ls1028a: sl28: get MAC addresses from VPD
Now that it is finally possible to get the MAC addresses from the OTP
memory, use it to set the addresses of the network devices.
There are 8 reserved MAC addresses in total per board. Distribute them
as follows:
+----------+------+------+------+------+------+
| | var1 | var2 | var3 | var4 | kbox |
+----------+------+------+------+------+------+
| enetc #0 | +0 | | | +0 | +0 |
| enetc #1 | | | +0 | +1 | +1 |
| enetc #2 | rand | rand | rand | rand | rand |
| enetc #3 | | | | | |
| felix p0 | | +0 | | | +4 |
| felix p1 | | +1 | | | +5 |
| felix p2 | | | | | +6 |
| felix p3 | | | | | +7 |
| felix p4 | | | | | |
| felix p5 | | | | | |
+----------+------+------+------+------+------+
An empty cell means, the port is not available and thus doesn't need an
ethernet address.
Signed-off-by: Michael Walle <michael@...le.cc>
---
.../freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts | 8 ++++++++
.../dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts | 2 ++
.../dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts | 4 ++++
.../dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts | 2 ++
.../boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts | 13 +++++++++++++
5 files changed, 29 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index 6b575efd84a7..b5c874c145d3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -76,6 +76,8 @@ &mscc_felix_port0 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy0>;
phy-mode = "qsgmii";
+ nvmem-cells = <&base_mac_address 4>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -84,6 +86,8 @@ &mscc_felix_port1 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy1>;
phy-mode = "qsgmii";
+ nvmem-cells = <&base_mac_address 5>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -92,6 +96,8 @@ &mscc_felix_port2 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy2>;
phy-mode = "qsgmii";
+ nvmem-cells = <&base_mac_address 6>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -100,6 +106,8 @@ &mscc_felix_port3 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy3>;
phy-mode = "qsgmii";
+ nvmem-cells = <&base_mac_address 7>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
index 7cd29ab970d9..1f34c7553459 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
@@ -55,5 +55,7 @@ &enetc_port0 {
&enetc_port1 {
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
+ nvmem-cells = <&base_mac_address 0>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
index 330e34f933a3..0ed0d2545922 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -48,6 +48,8 @@ &mscc_felix_port0 {
managed = "in-band-status";
phy-handle = <&phy0>;
phy-mode = "sgmii";
+ nvmem-cells = <&base_mac_address 0>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -56,6 +58,8 @@ &mscc_felix_port1 {
managed = "in-band-status";
phy-handle = <&phy1>;
phy-mode = "sgmii";
+ nvmem-cells = <&base_mac_address 1>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
index 9b5e92fb753e..a4421db3784e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -43,5 +43,7 @@ vddh: vddh-regulator {
&enetc_port1 {
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
+ nvmem-cells = <&base_mac_address 1>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 4ab17b984b03..72429b37a8b4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -92,6 +92,8 @@ &enetc_port0 {
phy-handle = <&phy0>;
phy-mode = "sgmii";
managed = "in-band-status";
+ nvmem-cells = <&base_mac_address 0>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -154,6 +156,17 @@ partition@...000 {
label = "bootloader environment";
};
};
+
+ otp-1 {
+ compatible = "kontron,sl28-vpd", "user-otp";
+
+ serial_number: serial-number {
+ };
+
+ base_mac_address: base-mac-address {
+ #nvmem-cell-cells = <1>;
+ };
+ };
};
};
--
2.30.2
Powered by blists - more mailing lists