[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220825051614.kfify5fbqlhurvdn@mobilestation>
Date: Thu, 25 Aug 2022 08:16:14 +0300
From: Serge Semin <fancer.lancer@...il.com>
To: Bjorn Helgaas <helgaas@...nel.org>
Cc: Serge Semin <Sergey.Semin@...kalelectronics.ru>,
Gustavo Pimentel <gustavo.pimentel@...opsys.com>,
Vinod Koul <vkoul@...nel.org>, Rob Herring <robh@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Jingoo Han <jingoohan1@...il.com>, Frank Li <Frank.Li@....com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
Pavel Parkhomenko <Pavel.Parkhomenko@...kalelectronics.ru>,
linux-pci@...r.kernel.org, dmaengine@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH RESEND v5 24/24] PCI: dwc: Add DW eDMA engine support
On Wed, Aug 24, 2022 at 01:17:54PM -0500, Bjorn Helgaas wrote:
> On Wed, Aug 24, 2022 at 09:13:19PM +0300, Serge Semin wrote:
> > On Wed, Aug 24, 2022 at 11:51:18AM -0500, Bjorn Helgaas wrote:
> > > On Mon, Aug 22, 2022 at 09:53:32PM +0300, Serge Semin wrote:
>
> > > > + val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL);
> > > > + if (val == 0xFFFFFFFF && pci->edma.reg_base) {
> > > > + pci->edma.mf = EDMA_MF_EDMA_UNROLL;
> > > > +
> > > > + val = dw_pcie_readl_dma(pci, PCIE_DMA_CTRL);
> > > > + } else if (val != 0xFFFFFFFF) {
> > >
> >
> > > Consider PCI_POSSIBLE_ERROR() as an annotation about the meaning of
> > > 0xFFFFFFFF and something to grep for.
> >
> > In this case FFs don't mean an error but a special value, which
> > indicates that the eDMA is mapped via the unrolled CSRs space. The
> > similar approach has been implemented for the iATU legacy/unroll setup
> > auto-detection. So I don't see much reasons to have it grepped, so as
> > to have a macro-based parametrization since the special value will
> > unluckily change while having the explicit literal utilized gives a
> > better understanding of the way the algorithm works.
>
> If 0xFFFFFFFF is the result of a successful PCIe Memory Read,
Right. It is.
> and not
> something synthesized by the host bridge when it handles an
> Unsupported Request completion,
No it isn't. To be clear 0xFFs don't indicate some PCIe bus/controller
malfunction, but they are a result of reading the
DMA_CTRL_VIEWPORT_OFF register which doesn't exist. The manual
explicitly says: "Note - When register does not exist, value is fixed
to 32'hFFFF_FFFF". The register doesn't exist if either eDMA is
unavailable or the eDMA CSRs are mapped via the unrolled state. That
logic is used to auto-detect the eDMA availability and the way of it's
CSRs mapping.
> I'm fine with keeping it as is.
Ok. Thanks.
-Sergey
Powered by blists - more mailing lists