| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220825091752.3535657-1-arnd@kernel.org>
Date: Thu, 25 Aug 2022 11:17:52 +0200
From: Arnd Bergmann <arnd@...nel.org>
To: Christoph Hellwig <hch@....de>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Arnd Bergmann <arnd@...db.de>,
Russell King <linux@...linux.org.uk>,
Linus Walleij <linus.walleij@...aro.org>,
Marc Zyngier <maz@...nel.org>
Subject: [PATCH 5/4] ARM: footbridge: remove custom DMA address handling
From: Arnd Bergmann <arnd@...db.de>
Footbridge is the last Arm platform that has its own
__virt_to_bus()/__bus_to_virt()/phys_to_dma()/dma_to_phys() abstraction,
but this is just a simple offset now.
For ISA DMA (floppy etc), the offset is actually zero, so the special
hack to subtract the bus offset can be removed from common code.
For PCI devices, the offset that is programmed into the PCI bridge
must also be set in each device using dma_direct_set_offset().
As Arm does not have a pcibios_bus_add_device() helper yet, just
use a bus notifier for this.
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
I added this patch on top of the footbridge series,
the other four are unmodified.
arch/arm/include/asm/dma-direct.h | 1 -
arch/arm/include/asm/dma.h | 2 +-
arch/arm/include/asm/memory.h | 11 --------
arch/arm/mach-footbridge/Kconfig | 1 -
arch/arm/mach-footbridge/common.c | 10 -------
arch/arm/mach-footbridge/dc21285.c | 28 ++++++++++++++++++-
.../mach-footbridge/include/mach/dma-direct.h | 8 ------
.../arm/mach-footbridge/include/mach/memory.h | 9 ------
8 files changed, 28 insertions(+), 42 deletions(-)
delete mode 100644 arch/arm/include/asm/dma-direct.h
delete mode 100644 arch/arm/mach-footbridge/include/mach/dma-direct.h
diff --git a/arch/arm/include/asm/dma-direct.h b/arch/arm/include/asm/dma-direct.h
deleted file mode 100644
index 4f7bcde03abb..000000000000
--- a/arch/arm/include/asm/dma-direct.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <mach/dma-direct.h>
diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index 05f29a72150b..ab3863a3cdf2 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -106,7 +106,7 @@ extern void set_dma_sg(unsigned int chan, struct scatterlist *sg, int nr_sg);
*/
extern void __set_dma_addr(unsigned int chan, void *addr);
#define set_dma_addr(chan, addr) \
- __set_dma_addr(chan, (void *)__bus_to_virt(addr))
+ __set_dma_addr(chan, (void *)(addr))
/* Set the DMA byte count for this channel
*
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index a55a9038abc8..d8eef4bd8c71 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -369,17 +369,6 @@ static inline unsigned long __virt_to_idmap(unsigned long x)
#define virt_to_idmap(x) __virt_to_idmap((unsigned long)(x))
-/*
- * Virtual <-> DMA view memory address translations
- * Again, these are *only* valid on the kernel direct mapped RAM
- * memory. Use of these is *deprecated* (and that doesn't mean
- * use the __ prefixed forms instead.) See dma-mapping.h.
- */
-#ifndef __virt_to_bus
-#define __virt_to_bus __virt_to_phys
-#define __bus_to_virt __phys_to_virt
-#endif
-
/*
* Conversion between a struct page and a physical address.
*
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index cd18871fd03f..f452663576d1 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -44,7 +44,6 @@ endmenu
# Footbridge support
config FOOTBRIDGE
def_bool y
- select ARCH_HAS_PHYS_TO_DMA
select ARCH_MIGHT_HAVE_PC_SERIO
select ISA_DMA_API
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index 9483eccea5ae..629e4676ed77 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -281,13 +281,3 @@ void footbridge_restart(enum reboot_mode mode, const char *cmd)
*CSR_SA110_CNTL |= (1 << 13);
}
}
-
-dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
-{
- return paddr + (BUS_OFFSET - PHYS_OFFSET);
-}
-
-phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr)
-{
- return dev_addr - (BUS_OFFSET - PHYS_OFFSET);
-}
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index 372600bc15c8..e34b33a955e2 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -5,6 +5,7 @@
* Copyright (C) 1998-2001 Russell King
* Copyright (C) 1998-2000 Phil Blundell
*/
+#include <linux/dma-map-ops.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
@@ -241,6 +242,29 @@ static irqreturn_t dc21285_parity_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
+/*
+ * The footbridge is programmed to expose the system RAM at 0xe0000000.
+ * The requirement is that the RAM isn't placed at bus address 0, which
+ * would clash with VGA cards.
+ */
+#define BUS_OFFSET 0xe0000000
+
+static int dc21285_pci_bus_notifier(struct notifier_block *nb,
+ unsigned long action,
+ void *data)
+{
+ if (action != BUS_NOTIFY_ADD_DEVICE)
+ return NOTIFY_DONE;
+
+ dma_direct_set_offset(data, PHYS_OFFSET, BUS_OFFSET, SZ_256M);
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block dc21285_pci_bus_nb = {
+ .notifier_call = dc21285_pci_bus_notifier,
+};
+
int __init dc21285_setup(int nr, struct pci_sys_data *sys)
{
struct resource *res;
@@ -266,6 +290,8 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys)
pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset);
pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
+ bus_register_notifier(&pci_bus_type, &dc21285_pci_bus_nb);
+
return 1;
}
@@ -329,7 +355,7 @@ void __init dc21285_preinit(void)
*/
*CSR_PCICSRBASE = 0xf4000000;
*CSR_PCICSRIOBASE = 0;
- *CSR_PCISDRAMBASE = __virt_to_bus(PAGE_OFFSET);
+ *CSR_PCISDRAMBASE = BUS_OFFSET;
*CSR_PCIROMBASE = 0;
*CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
PCI_COMMAND_INVALIDATE | PCICMD_ERROR_BITS;
diff --git a/arch/arm/mach-footbridge/include/mach/dma-direct.h b/arch/arm/mach-footbridge/include/mach/dma-direct.h
deleted file mode 100644
index 01f9e8367c00..000000000000
--- a/arch/arm/mach-footbridge/include/mach/dma-direct.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef MACH_FOOTBRIDGE_DMA_DIRECT_H
-#define MACH_FOOTBRIDGE_DMA_DIRECT_H 1
-
-dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr);
-phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr);
-
-#endif /* MACH_FOOTBRIDGE_DMA_DIRECT_H */
diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h
index 8f0ca8e8b37e..9516877667d7 100644
--- a/arch/arm/mach-footbridge/include/mach/memory.h
+++ b/arch/arm/mach-footbridge/include/mach/memory.h
@@ -16,15 +16,6 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-/*
- * The footbridge is programmed to expose the system RAM at 0xe0000000.
- * The requirement is that the RAM isn't placed at bus address 0, which
- * would clash with VGA cards.
- */
-#define BUS_OFFSET 0xe0000000
-#define __virt_to_bus(x) ((x) + (BUS_OFFSET - PAGE_OFFSET))
-#define __bus_to_virt(x) ((x) - (BUS_OFFSET - PAGE_OFFSET))
-
/*
* Cache flushing area.
*/
--
2.29.2
Powered by blists - more mailing lists