[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220825094132.1268174-1-s.hauer@pengutronix.de>
Date: Thu, 25 Aug 2022 11:41:30 +0200
From: Sascha Hauer <s.hauer@...gutronix.de>
To: linux-gpio@...r.kernel.org
Cc: linux-kernel@...r.kernel.org,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>, kernel@...gutronix.de,
Sascha Hauer <s.hauer@...gutronix.de>
Subject: [PATCH 0/2] gpio: Add gpio-latch driver
This adds a gpio-driver which multiplexes existing GPIOs using latches.
Uwe asked [1] if that would be accectable as a new gpio driver, and here
is the result. For a better description what this is all about have a
look at the drawings in the patches.
The driver is pretty much straight forward. The only thing I wasn't sure
about is in which category in Kconfig the driver should be sorted in. I
decided for "Virtual GPIO drivers" which is not an exact match, but the
best I could find in the existing categories.
Sascha
[1] https://lore.kernel.org/all/CACRpkdaBO=JzokGUF6uXZc7ASVD7LjqBxTLGwX-FShM=A9gw9A@mail.gmail.com/t/
Sascha Hauer (2):
gpio: Add gpio latch driver
dt-bindings: gpio: Add gpio-latch binding document
.../devicetree/bindings/gpio/gpio-latch.yaml | 83 ++++++++
drivers/gpio/Kconfig | 6 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-latch.c | 188 ++++++++++++++++++
4 files changed, 278 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-latch.yaml
create mode 100644 drivers/gpio/gpio-latch.c
--
2.30.2
Powered by blists - more mailing lists