[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220826181923.251564-5-manivannan.sadhasivam@linaro.org>
Date: Fri, 26 Aug 2022 23:49:16 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: lpieralisi@...nel.org, robh@...nel.org, andersson@...nel.org
Cc: kw@...ux.com, bhelgaas@...gle.com, linux-pci@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
konrad.dybcio@...ainline.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, devicetree@...r.kernel.org,
dmitry.baryshkov@...aro.org,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH 04/11] PCI: qcom-ep: Add eDMA support
Qualcomm PCIe Endpoint controllers have the in-built Embedded DMA (eDMA)
peripheral for offloading the data transfer between PCIe bus and memory.
Let's add the support for it by enabling the eDMA IRQ in the driver.
Rest of the functionality will be handled by the eDMA DMA Engine driver.
Since the eDMA on Qualcomm platforms only uses a single IRQ for all
channels, use 1 for edma.nr_irqs.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
drivers/pci/controller/dwc/pcie-qcom-ep.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index 1e09eca5b3b2..54b927adf60a 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -66,6 +66,7 @@
#define PARF_INT_ALL_PLS_ERR BIT(15)
#define PARF_INT_ALL_PME_LEGACY BIT(16)
#define PARF_INT_ALL_PLS_PME BIT(17)
+#define PARF_INT_ALL_EDMA BIT(22)
/* PARF_BDF_TO_SID_CFG register fields */
#define PARF_BDF_TO_SID_BYPASS BIT(0)
@@ -367,7 +368,7 @@ static int qcom_pcie_perst_deassert(struct dw_pcie *pci)
writel_relaxed(0, pcie_ep->parf + PARF_INT_ALL_MASK);
val = PARF_INT_ALL_LINK_DOWN | PARF_INT_ALL_BME |
PARF_INT_ALL_PM_TURNOFF | PARF_INT_ALL_DSTATE_CHANGE |
- PARF_INT_ALL_LINK_UP;
+ PARF_INT_ALL_LINK_UP | PARF_INT_ALL_EDMA;
writel_relaxed(val, pcie_ep->parf + PARF_INT_ALL_MASK);
ret = dw_pcie_ep_init_complete(&pcie_ep->pci.ep);
@@ -670,6 +671,7 @@ static int qcom_pcie_ep_probe(struct platform_device *pdev)
pcie_ep->pci.dev = dev;
pcie_ep->pci.ops = &pci_ops;
pcie_ep->pci.ep.ops = &pci_ep_ops;
+ pcie_ep->pci.edma.nr_irqs = 1;
platform_set_drvdata(pdev, pcie_ep);
ret = qcom_pcie_ep_get_resources(pdev, pcie_ep);
--
2.25.1
Powered by blists - more mailing lists