linux-kernel - Re: [PATCH 4/7] arm64: dts: qcom: sc8280xp-thinkpad-x13s: Specify which LDO modes are allowed

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <9c2a2d4a-8b68-d1b3-92fa-ec2b1c7bb28e@somainline.org>
Date:   Fri, 26 Aug 2022 20:40:47 +0200
From:   Konrad Dybcio <konrad.dybcio@...ainline.org>
To:     Douglas Anderson <dianders@...omium.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>
Cc:     Andrew Halaney <ahalaney@...hat.com>,
        Mark Brown <broonie@...nel.org>,
        Andy Gross <agross@...nel.org>,
        Johan Hovold <johan+linaro@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 4/7] arm64: dts: qcom: sc8280xp-thinkpad-x13s: Specify
 which LDO modes are allowed



On 25.08.2022 18:42, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
> 
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
> 
> Let's re-enable the old functionality by fixing the dts.
> 
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
> 
> Fixes: 32c231385ed4 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree")
> Signed-off-by: Douglas Anderson <dianders@...omium.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@...ainline.org>

Konrad

> 
>  .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 30 +++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index 16c6e4d920bb..0c2534b4ec24 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -80,6 +80,9 @@ vreg_l3b: ldo3 {
>  			regulator-max-microvolt = <1200000>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  			regulator-allow-set-load;
> +			regulator-allowed-modes =
> +			    <RPMH_REGULATOR_MODE_LPM
> +			     RPMH_REGULATOR_MODE_HPM>;
>  			regulator-boot-on;
>  		};
>  
> @@ -89,6 +92,9 @@ vreg_l4b: ldo4 {
>  			regulator-max-microvolt = <912000>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  			regulator-allow-set-load;
> +			regulator-allowed-modes =
> +			    <RPMH_REGULATOR_MODE_LPM
> +			     RPMH_REGULATOR_MODE_HPM>;
>  		};
>  
>  		vreg_l6b: ldo6 {
> @@ -97,6 +103,9 @@ vreg_l6b: ldo6 {
>  			regulator-max-microvolt = <880000>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  			regulator-allow-set-load;
> +			regulator-allowed-modes =
> +			    <RPMH_REGULATOR_MODE_LPM
> +			     RPMH_REGULATOR_MODE_HPM>;
>  			regulator-boot-on;
>  			regulator-always-on;	// FIXME: VDD_A_EDP_0_0P9
>  		};
> @@ -112,6 +121,9 @@ vreg_l1c: ldo1 {
>  			regulator-max-microvolt = <1800000>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  			regulator-allow-set-load;
> +			regulator-allowed-modes =
> +			    <RPMH_REGULATOR_MODE_LPM
> +			     RPMH_REGULATOR_MODE_HPM>;
>  		};
>  
>  		vreg_l12c: ldo12 {
> @@ -120,6 +132,9 @@ vreg_l12c: ldo12 {
>  			regulator-max-microvolt = <1800000>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  			regulator-allow-set-load;
> +			regulator-allowed-modes =
> +			    <RPMH_REGULATOR_MODE_LPM
> +			     RPMH_REGULATOR_MODE_HPM>;
>  		};
>  
>  		vreg_l13c: ldo13 {
> @@ -128,6 +143,9 @@ vreg_l13c: ldo13 {
>  			regulator-max-microvolt = <3072000>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  			regulator-allow-set-load;
> +			regulator-allowed-modes =
> +			    <RPMH_REGULATOR_MODE_LPM
> +			     RPMH_REGULATOR_MODE_HPM>;
>  		};
>  	};
>  
> @@ -143,6 +161,9 @@ vreg_l3d: ldo3 {
>  			regulator-max-microvolt = <1200000>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  			regulator-allow-set-load;
> +			regulator-allowed-modes =
> +			    <RPMH_REGULATOR_MODE_LPM
> +			     RPMH_REGULATOR_MODE_HPM>;
>  		};
>  
>  		vreg_l4d: ldo4 {
> @@ -151,6 +172,9 @@ vreg_l4d: ldo4 {
>  			regulator-max-microvolt = <1200000>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  			regulator-allow-set-load;
> +			regulator-allowed-modes =
> +			    <RPMH_REGULATOR_MODE_LPM
> +			     RPMH_REGULATOR_MODE_HPM>;
>  		};
>  
>  		vreg_l7d: ldo7 {
> @@ -159,6 +183,9 @@ vreg_l7d: ldo7 {
>  			regulator-max-microvolt = <3072000>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  			regulator-allow-set-load;
> +			regulator-allowed-modes =
> +			    <RPMH_REGULATOR_MODE_LPM
> +			     RPMH_REGULATOR_MODE_HPM>;
>  		};
>  
>  		vreg_l9d: ldo9 {
> @@ -167,6 +194,9 @@ vreg_l9d: ldo9 {
>  			regulator-max-microvolt = <912000>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  			regulator-allow-set-load;
> +			regulator-allowed-modes =
> +			    <RPMH_REGULATOR_MODE_LPM
> +			     RPMH_REGULATOR_MODE_HPM>;
>  		};
>  	};
>  };