| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220826195141.165631-1-eajames@linux.ibm.com>
Date: Fri, 26 Aug 2022 14:51:41 -0500
From: Eddie James <eajames@...ux.ibm.com>
To: joel@....id.au
Cc: eajames@...ux.ibm.com, andrew@...id.au,
krzysztof.kozlowski+dt@...aro.org, robh+dt@...nel.org,
soc@...nel.org, olof@...om.net, arnd@...db.de,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-aspeed@...ts.ozlabs.org,
wrightj@...ux.ibm.com
Subject: [PATCH] ARM: dts: aspeed: Add IBM Bonnell system BMC devicetree
Bonnell is an IBM Power10 server system with an AST2600 BMC.
Signed-off-by: Eddie James <eajames@...ux.ibm.com>
Reviewed-by: Jim Wright <wrightj@...ux.ibm.com>
Signed-off-by: Joel Stanley <joel@....id.au>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts | 909 +++++++++++++++++++
2 files changed, 910 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e49185119b5b..add4d52ab718 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1594,6 +1594,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-wedge400.dtb \
aspeed-bmc-facebook-yamp.dtb \
aspeed-bmc-facebook-yosemitev2.dtb \
+ aspeed-bmc-ibm-bonnell.dtb \
aspeed-bmc-ibm-everest.dtb \
aspeed-bmc-ibm-rainier.dtb \
aspeed-bmc-ibm-rainier-1s4u.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
new file mode 100644
index 000000000000..6789c1ec286a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
@@ -0,0 +1,909 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "Bonnell";
+ compatible = "ibm,bonnell-bmc", "aspeed,ast2600";
+
+ aliases {
+ i2c100 = &cfam0_i2c0;
+ i2c101 = &cfam0_i2c1;
+ i2c110 = &cfam0_i2c10;
+ i2c111 = &cfam0_i2c11;
+ i2c112 = &cfam0_i2c12;
+ i2c113 = &cfam0_i2c13;
+ i2c114 = &cfam0_i2c14;
+ i2c115 = &cfam0_i2c15;
+ i2c202 = &cfam1_i2c2;
+ i2c203 = &cfam1_i2c3;
+ i2c210 = &cfam1_i2c10;
+ i2c211 = &cfam1_i2c11;
+ i2c214 = &cfam1_i2c14;
+ i2c215 = &cfam1_i2c15;
+ i2c216 = &cfam1_i2c16;
+ i2c217 = &cfam1_i2c17;
+
+ serial4 = &uart5;
+ i2c16 = &i2c11mux0chn0;
+ i2c17 = &i2c11mux0chn1;
+ i2c18 = &i2c11mux0chn2;
+ i2c19 = &i2c11mux0chn3;
+
+ spi10 = &cfam0_spi0;
+ spi11 = &cfam0_spi1;
+ spi12 = &cfam0_spi2;
+ spi13 = &cfam0_spi3;
+ spi20 = &cfam1_spi0;
+ spi21 = &cfam1_spi1;
+ spi22 = &cfam1_spi2;
+ spi23 = &cfam1_spi3;
+
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200n8 earlycon";
+ };
+
+ memory@...00000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flash_memory: region@...00000 {
+ no-map;
+ reg = <0xb8000000 0x04000000>; /* 64M */
+ };
+
+ ramoops@...00000 {
+ compatible = "ramoops";
+ reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>; /* KMSG_DUMP_EMERG */
+ };
+
+ vga_memory: region@...00000 {
+ no-map;
+ compatible = "shared-dma-pool";
+ reg = <0xbf000000 0x01000000>; /* 16M */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ fan0 {
+ gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ fan1 {
+ gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ rear-enc-id0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ rear-enc-fault0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <1000>;
+
+ fan0-presence {
+ label = "fan0-presence";
+ gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+ linux,code = <6>;
+ };
+
+ fan1-presence {
+ label = "fan1-presence";
+ gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+ linux,code = <7>;
+ };
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc1 7>;
+ };
+};
+
+&adc1 {
+ status = "okay";
+ aspeed,int-vref-microvolt = <2500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+ &pinctrl_adc10_default &pinctrl_adc11_default
+ &pinctrl_adc12_default &pinctrl_adc13_default
+ &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "","","","","","","checkstop","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","","",
+ /*G0-G7*/ "fan0","fan1","","","","","","",
+ /*H0-H7*/ "","","rear-enc-id0","rear-enc-fault0","","","","",
+ /*I0-I7*/ "","","","","","","bmc-secure-boot","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","usb-power","","","","",
+ /*P0-P7*/ "","","","","","","","",
+ /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","",
+ /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+ /*S0-S7*/ "presence-ps0","presence-ps1","","","power-ffs-sync-history","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+
+ usb_power {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+ output-high;
+ };
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&pinctrl_emmc_default {
+ bias-disable;
+};
+
+&emmc {
+ status = "okay";
+ clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&fsim0 {
+ status = "okay";
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom@...0 {
+ compatible = "ibm,fsi2pib";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@...0 {
+ compatible = "ibm,fsi-i2c-master";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam0_i2c0: i2c-bus@0 {
+ reg = <0>; /* OMI01 */
+ };
+
+ cfam0_i2c1: i2c-bus@1 {
+ reg = <1>; /* OMI23 */
+ };
+
+ cfam0_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ };
+
+ cfam0_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ };
+
+ cfam0_i2c12: i2c-bus@c {
+ reg = <12>; /* OP4A */
+ };
+
+ cfam0_i2c13: i2c-bus@d {
+ reg = <13>; /* OP4B */
+ };
+
+ cfam0_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ };
+
+ cfam0_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ };
+ };
+
+ fsi2spi@...0 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam0_spi0: spi@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam0_spi1: spi@20 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam0_spi2: spi@40 {
+ reg = <0x40>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam0_spi3: spi@60 {
+ reg = <0x60>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo@...0 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi_occ0: occ {
+ compatible = "ibm,p10-occ";
+ };
+ };
+
+ fsi_hub0: hub@...0 {
+ compatible = "fsi-master-hub";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&fsi_hub0 {
+ cfam@1,0 {
+ reg = <1 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <1>;
+
+ scom@...0 {
+ compatible = "ibm,fsi2pib";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@...0 {
+ compatible = "ibm,fsi-i2c-master";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam1_i2c2: i2c-bus@2 {
+ reg = <2>; /* OMI45 */
+ };
+
+ cfam1_i2c3: i2c-bus@3 {
+ reg = <3>; /* OMI67 */
+ };
+
+ cfam1_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ };
+
+ cfam1_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ };
+
+ cfam1_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ };
+
+ cfam1_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ };
+
+ cfam1_i2c16: i2c-bus@10 {
+ reg = <16>; /* OP6A */
+ };
+
+ cfam1_i2c17: i2c-bus@11 {
+ reg = <17>; /* OP6B */
+ };
+ };
+
+ fsi2spi@...0 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam1_spi0: spi@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam1_spi1: spi@20 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam1_spi2: spi@40 {
+ reg = <0x40>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam1_spi3: spi@60 {
+ reg = <0x60>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo@...0 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi_occ1: occ {
+ compatible = "ibm,p10-occ";
+ };
+ };
+
+ fsi_hub1: hub@...0 {
+ compatible = "fsi-master-hub";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ no-scan-on-init;
+ };
+ };
+};
+
+&ibt {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ tca9554@20 {
+ compatible = "ti,tca9554";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names = "",
+ "RUSSEL_FW_I2C_ENABLE_N",
+ "RUSSEL_OPPANEL_PRESENCE_N",
+ "BLYTH_OPPANEL_PRESENCE_N",
+ "CPU_TPM_CARD_PRESENT_N",
+ "",
+ "",
+ "DASD_BP_PRESENT_N";
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+
+ ucd90160@64 {
+ compatible = "ti,ucd90160";
+ reg = <0x64>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ power-supply@58 {
+ compatible = "ibm,cffps";
+ reg = <0x58>;
+ };
+
+ power-supply@59 {
+ compatible = "ibm,cffps";
+ reg = <0x59>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ multi-master;
+ status = "okay";
+
+ si7021-a20@40 {
+ compatible = "silabs,si7020";
+ reg = <0x40>;
+ };
+
+ tmp275@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ max31785@52 {
+ compatible = "maxim,max31785a";
+ reg = <0x52>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan0: fan@0 {
+ compatible = "pmbus-fan";
+ reg = <0>;
+ tach-pulses = <2>;
+ };
+
+ fan1: fan@1 {
+ compatible = "pmbus-fan";
+ reg = <1>;
+ tach-pulses = <2>;
+ };
+ };
+
+ pca9551@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "front-sys-id0";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "front-check-log0";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "front-enc-fault1";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "front-sys-pwron0";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ ibm-panel@62 {
+ compatible = "ibm,op-panel";
+ reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+
+ dps: dps310@76 {
+ compatible = "infineon,dps310";
+ reg = <0x76>;
+ #io-channel-cells = <0>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+
+ tmp275@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ pca9551@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names = "",
+ "APSS_RESET_N",
+ "",
+ "N_MODE_CPU_N",
+ "",
+ "",
+ "P10_DCM_PRESENT",
+ "";
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ tmp423a@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+
+ tca9554@20 {
+ compatible = "ti,tca9554";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names = "BOOT_RCVRY_TWI",
+ "BOOT_RCVRY_UART",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "PE_SWITCH_RSTB_N";
+ };
+
+ tmp435@4c {
+ compatible = "ti,tmp435";
+ reg = <0x4c>;
+ };
+
+ pca9849@75 {
+ compatible = "nxp,pca9849";
+ reg = <0x75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ i2c-mux-idle-disconnect;
+
+ i2c11mux0chn0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c11mux0chn1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c11mux0chn2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c11mux0chn3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c12 {
+ status = "okay";
+
+ tpm@2e {
+ compatible = "nuvoton,npct75x";
+ reg = <0x2e>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ pca9551@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "nvme0";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "nvme1";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "nvme2";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "nvme3";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+};
+
+&i2c14 {
+ status = "okay";
+};
+
+&i2c15 {
+ status = "okay";
+};
+
+&vuart1 {
+ status = "okay";
+};
+
+&vuart2 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii3_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+ <&syscon ASPEED_CLK_MAC3RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+ <&syscon ASPEED_CLK_MAC4RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+ status = "okay";
+};
+
+&xdma {
+ status = "okay";
+ memory-region = <&vga_memory>;
+};
+
+&kcs2 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+ aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
--
2.31.1
Powered by blists - more mailing lists