[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220826083927.3107272-3-claudiu.beznea@microchip.com>
Date: Fri, 26 Aug 2022 11:39:20 +0300
From: Claudiu Beznea <claudiu.beznea@...rochip.com>
To: <nicolas.ferre@...rochip.com>, <alexandre.belloni@...tlin.com>,
<claudiu.beznea@...rochip.com>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <linux@...linux.org.uk>,
<arnd@...db.de>
CC: <cristian.birsan@...rochip.com>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
"Frederic Schumacher" <frederic.schumacher@...rochip.com>
Subject: [PATCH 2/9] ARM: at91: pm: fix self-refresh for sama7g5
It has been discovered that on some parts, from time to time, self-refresh
procedure doesn't work as expected. Debugging and investigating it proved
that disabling AC DLL introduce glitches in RAM controllers which
leads to unexpected behavior. This is confirmed as a hardware bug. DLL
bypass disables 3 DLLs: 2 DX DLLs and AC DLL. Thus, keep only DX DLLs
disabled. This introduce 6mA extra current consumption on VDDCORE when
switching ot any ULP mode or standby mode but the self-refresh procedure
still works.
Fixes: f0bbf17958e8 ("ARM: at91: pm: add self-refresh support for sama7g5")
Suggested-by: Frederic Schumacher <frederic.schumacher@...rochip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@...rochip.com>
Tested-by: Cristian Birsan <cristian.birsan@...rochip.com>
---
arch/arm/mach-at91/pm_suspend.S | 24 +++++++++++++++++-------
include/soc/at91/sama7-ddr.h | 4 ++++
2 files changed, 21 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index abe4ced33eda..ffed4d949042 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -172,9 +172,15 @@ sr_ena_2:
/* Put DDR PHY's DLL in bypass mode for non-backup modes. */
cmp r7, #AT91_PM_BACKUP
beq sr_ena_3
- ldr tmp1, [r3, #DDR3PHY_PIR]
- orr tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
- str tmp1, [r3, #DDR3PHY_PIR]
+
+ /* Disable DX DLLs. */
+ ldr tmp1, [r3, #DDR3PHY_DX0DLLCR]
+ orr tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+ str tmp1, [r3, #DDR3PHY_DX0DLLCR]
+
+ ldr tmp1, [r3, #DDR3PHY_DX1DLLCR]
+ orr tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+ str tmp1, [r3, #DDR3PHY_DX1DLLCR]
sr_ena_3:
/* Power down DDR PHY data receivers. */
@@ -221,10 +227,14 @@ sr_ena_3:
bic tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
str tmp1, [r3, #DDR3PHY_DSGCR]
- /* Take DDR PHY's DLL out of bypass mode. */
- ldr tmp1, [r3, #DDR3PHY_PIR]
- bic tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
- str tmp1, [r3, #DDR3PHY_PIR]
+ /* Enable DX DLLs. */
+ ldr tmp1, [r3, #DDR3PHY_DX0DLLCR]
+ bic tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+ str tmp1, [r3, #DDR3PHY_DX0DLLCR]
+
+ ldr tmp1, [r3, #DDR3PHY_DX1DLLCR]
+ bic tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+ str tmp1, [r3, #DDR3PHY_DX1DLLCR]
/* Enable quasi-dynamic programming. */
mov tmp1, #0
diff --git a/include/soc/at91/sama7-ddr.h b/include/soc/at91/sama7-ddr.h
index 9e17247474fa..2706bc48c076 100644
--- a/include/soc/at91/sama7-ddr.h
+++ b/include/soc/at91/sama7-ddr.h
@@ -39,6 +39,10 @@
#define DDR3PHY_ZQ0SR0 (0x188) /* ZQ status register 0 */
+#define DDR3PHY_DX0DLLCR (0x1CC) /* DDR3PHY DATX8 DLL Control Register */
+#define DDR3PHY_DX1DLLCR (0x20C) /* DDR3PHY DATX8 DLL Control Register */
+#define DDR3PHY_DXDLLCR_DLLDIS (1 << 31) /* DLL Disable */
+
/* UDDRC */
#define UDDRC_STAT (0x04) /* UDDRC Operating Mode Status Register */
#define UDDRC_STAT_SELFREF_TYPE_DIS (0x0 << 4) /* SDRAM is not in Self-refresh */
--
2.34.1
Powered by blists - more mailing lists