linux-kernel - Re: [PATCH V2] usb: gadget: udc-xilinx: replace memcpy with memcpy

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CACRpkdae4fijFrFs-1u-AUNExvbda=6yeAyQJRQeVVQmdQOQZQ@mail.gmail.com>
Date:   Fri, 26 Aug 2022 13:03:51 +0200
From:   Linus Walleij <linus.walleij@...aro.org>
To:     Piyush Mehta <piyush.mehta@....com>
Cc:     balbi@...nel.org, gregkh@...uxfoundation.org,
        michal.simek@...inx.com, michal.simek@....com,
        shubhrajyoti.datta@...inx.com, lee.jones@...aro.org,
        christophe.jaillet@...adoo.fr, szymon.heidrich@...il.com,
        jakobkoschel@...il.com, linux-usb@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        git@....com, siva.durga.prasad.paladugu@....com,
        stable@...r.kernel.org
Subject: Re: [PATCH V2] usb: gadget: udc-xilinx: replace memcpy with memcpy_toio

On Wed, Aug 24, 2022 at 9:14 AM Piyush Mehta <piyush.mehta@....com> wrote:

> For ARM processor, unaligned access to device memory is not allowed.
> Method memcpy does not take care of alignment.
>
> USB detection failure with the unaligned address of memory access, with
> below kernel crash. To fix the unaligned address the kernel panic issue,
> replace memcpy with memcpy_toio method.
>
> Kernel crash:
> Unable to handle kernel paging request at virtual address ffff80000c05008a
> Mem abort info:
>   ESR = 0x96000061
>   EC = 0x25: DABT (current EL), IL = 32 bits
>   SET = 0, FnV = 0
>   EA = 0, S1PTW = 0
>   FSC = 0x21: alignment fault
> Data abort info:
>   ISV = 0, ISS = 0x00000061
>   CM = 0, WnR = 1
> swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000000143b000
> [ffff80000c05008a] pgd=100000087ffff003, p4d=100000087ffff003,
> pud=100000087fffe003, pmd=1000000800bcc003, pte=00680000a0010713
> Internal error: Oops: 96000061 [#1] SMP
> Modules linked in:
> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.19-xilinx-v2022.1 #1
> Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
> pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> pc : __memcpy+0x30/0x260
> lr : __xudc_ep0_queue+0xf0/0x110
> sp : ffff800008003d00
> x29: ffff800008003d00 x28: ffff800009474e80 x27: 00000000000000a0
> x26: 0000000000000100 x25: 0000000000000012 x24: ffff000800bc8080
> x23: 0000000000000001 x22: 0000000000000012 x21: ffff000800bc8080
> x20: 0000000000000012 x19: ffff000800bc8080 x18: 0000000000000000
> x17: ffff800876482000 x16: ffff800008004000 x15: 0000000000004000
> x14: 00001f09785d0400 x13: 0103020101005567 x12: 0781400000000200
> x11: 00000000c5672a10 x10: 00000000000008d0 x9 : ffff800009463cf0
> x8 : ffff8000094757b0 x7 : 0201010055670781 x6 : 4000000002000112
> x5 : ffff80000c05009a x4 : ffff000800a15012 x3 : ffff00080362ad80
> x2 : 0000000000000012 x1 : ffff000800a15000 x0 : ffff80000c050088
> Call trace:
>  __memcpy+0x30/0x260
>  xudc_ep0_queue+0x3c/0x60
>  usb_ep_queue+0x38/0x44
>  composite_ep0_queue.constprop.0+0x2c/0xc0
>  composite_setup+0x8d0/0x185c
>  configfs_composite_setup+0x74/0xb0
>  xudc_irq+0x570/0xa40
>  __handle_irq_event_percpu+0x58/0x170
>  handle_irq_event+0x60/0x120
>  handle_fasteoi_irq+0xc0/0x220
>  handle_domain_irq+0x60/0x90
>  gic_handle_irq+0x74/0xa0
>  call_on_irq_stack+0x2c/0x60
>  do_interrupt_handler+0x54/0x60
>  el1_interrupt+0x30/0x50
>  el1h_64_irq_handler+0x18/0x24
>  el1h_64_irq+0x78/0x7c
>  arch_cpu_idle+0x18/0x2c
>  do_idle+0xdc/0x15c
>  cpu_startup_entry+0x28/0x60
>  rest_init+0xc8/0xe0
>  arch_call_rest_init+0x10/0x1c
>  start_kernel+0x694/0x6d4
>  __primary_switched+0xa4/0xac
>
> Cc: stable@...r.kernel.org
> Fixes: 1f7c51660034 ("usb: gadget: Add xilinx usb2 device support")
> Signed-off-by: Piyush Mehta <piyush.mehta@....com>
> ---
> Changes in V2:
> - Address Greg KH review comments:
>  - Added information in the form of a Fixes: commit Id (commit message).
>  - Cc stable kernel.
>
> Link:https://lore.kernel.org/all/YwW8zE8ieLCsSxPN@kroah.com/

That link should be up under the commit message, but it's not very important.

The solution looks reasonable.
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>

Yours,
Linus Walleij