linux-kernel - Re: [PATCH] ACPI: docs: enumeration: Fix a few typos and wording mistakes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAHp75VdBv4EkDgTwHSxNhA91b8FMwaMvvoeWZOaxJVcvwRQ4vg@mail.gmail.com>
Date:   Fri, 26 Aug 2022 18:31:06 +0300
From:   Andy Shevchenko <andy.shevchenko@...il.com>
To:     Jean Delvare <jdelvare@...e.de>
Cc:     ACPI Devel Maling List <linux-acpi@...r.kernel.org>,
        "Rafael J. Wysocki" <rafael@...nel.org>,
        Len Brown <lenb@...nel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] ACPI: docs: enumeration: Fix a few typos and wording mistakes

On Fri, Aug 26, 2022 at 4:14 PM Jean Delvare <jdelvare@...e.de> wrote:
>
> "sturct" -> "struct"
> "similar than with" -> "similar to"
> Missing comma, "it" and "to"

Makes sense to me, thanks!
Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>

> Signed-off-by: Jean Delvare <jdelvare@...e.de>
> Cc: "Rafael J. Wysocki" <rafael@...nel.org>
> Cc: Len Brown <lenb@...nel.org>
> ---
>  Documentation/firmware-guide/acpi/enumeration.rst |   16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
>
> --- linux-5.19.orig/Documentation/firmware-guide/acpi/enumeration.rst   2022-08-26 12:46:35.307949217 +0200
> +++ linux-5.19/Documentation/firmware-guide/acpi/enumeration.rst        2022-08-26 15:02:50.245981296 +0200
> @@ -21,7 +21,7 @@ In order to support this and re-use the
>    - Devices behind real busses where there is a connector resource
>      are represented as struct spi_device or struct i2c_device. Note
>      that standard UARTs are not busses so there is no struct uart_device,
> -    although some of them may be represented by sturct serdev_device.
> +    although some of them may be represented by struct serdev_device.
>
>  As both ACPI and Device Tree represent a tree of devices (and their
>  resources) this implementation follows the Device Tree way as much as
> @@ -205,7 +205,7 @@ enumerated once spi_register_master() is
>                 }
>                 ...
>
> -The SPI device drivers only need to add ACPI IDs in a similar way than with
> +The SPI device drivers only need to add ACPI IDs in a similar way to
>  the platform device drivers. Below is an example where we add ACPI support
>  to at25 SPI eeprom driver (this is meant for the above ACPI snippet)::
>
> @@ -362,7 +362,7 @@ These GPIO numbers are controller relati
>  specifies the path to the controller. In order to use these GPIOs in Linux
>  we need to translate them to the corresponding Linux GPIO descriptors.
>
> -There is a standard GPIO API for that and is documented in
> +There is a standard GPIO API for that and it is documented in
>  Documentation/admin-guide/gpio/.
>
>  In the above example we can get the corresponding two GPIO descriptors with
> @@ -538,8 +538,8 @@ information.
>  PCI hierarchy representation
>  ============================
>
> -Sometimes could be useful to enumerate a PCI device, knowing its position on the
> -PCI bus.
> +Sometimes it could be useful to enumerate a PCI device, knowing its position on
> +the PCI bus.
>
>  For example, some systems use PCI devices soldered directly on the mother board,
>  in a fixed position (ethernet, Wi-Fi, serial ports, etc.). In this conditions it
> @@ -550,7 +550,7 @@ To identify a PCI device, a complete hie
>  the chipset root port to the final device, through all the intermediate
>  bridges/switches of the board.
>
> -For example, let us assume to have a system with a PCIe serial port, an
> +For example, let's assume we have a system with a PCIe serial port, an
>  Exar XR17V3521, soldered on the main board. This UART chip also includes
>  16 GPIOs and we want to add the property ``gpio-line-names`` [1] to these pins.
>  In this case, the ``lspci`` output for this component is::
> @@ -593,8 +593,8 @@ To describe this Exar device on the PCI
>
>         Bus: 0 - Device: 14 - Function: 1
>
> -To find this information is necessary disassemble the BIOS ACPI tables, in
> -particular the DSDT (see also [2])::
> +To find this information, it is necessary to disassemble the BIOS ACPI tables,
> +in particular the DSDT (see also [2])::
>
>         mkdir ~/tables/
>         cd ~/tables/
>
>
> --
> Jean Delvare
> SUSE L3 Support



-- 
With Best Regards,
Andy Shevchenko