[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YwmzkNVqgSEIgSKH@yilunxu-OptiPlex-7050>
Date: Sat, 27 Aug 2022 14:02:56 +0800
From: Xu Yilun <yilun.xu@...el.com>
To: Nava kishore Manne <nava.kishore.manne@....com>
Cc: git@....com, robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
michal.simek@...inx.com, mdf@...nel.org, hao.wu@...el.com,
trix@...hat.com, p.zabel@...gutronix.de,
gregkh@...uxfoundation.org, ronak.jain@...inx.com,
rajan.vaja@...inx.com, abhyuday.godhasara@...inx.com,
piyush.mehta@...inx.com, lakshmi.sai.krishna.potthuri@...inx.com,
harsha.harsha@...inx.com, linus.walleij@...aro.org,
nava.manne@...inx.com, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-fpga@...r.kernel.org
Subject: Re: [PATCH 0/4]Add afi config drivers support
On 2022-08-24 at 09:25:38 +0530, Nava kishore Manne wrote:
> Xilinx SoC platforms (Zynq and ZynqMP) connect the PS to the programmable
Could you help explain what is PS?
Thanks,
Yiljn
> logic (PL) through the AXI port.This AXI port helps to establish the data
> path between the PS and PL. In-order to establish the proper communication
> data path between PS and PL the AXI port data path should be configured
> with the proper Bus-width values and it will also handle the PS-PL reset
> signals to reset the PL domain.
>
> This patch series adds afi config drivers support to handle the PS-PL
> resets and AXI port bus-width configurations.
>
> Nava kishore Manne (4):
> firmware: xilinx: Add afi ioctl support
> bindings: fpga: Add binding doc for the zynqmp afi config driver
> bindings: firmware: Update binding doc for the zynqmp afi config node
> fpga: zynqmp: Add afi config driver
>
> .../firmware/xilinx/xlnx,zynqmp-firmware.yaml | 7 +
> .../bindings/fpga/xlnx,zynqmp-afi-fpga.yaml | 100 +++++++++
> MAINTAINERS | 6 +
> drivers/firmware/xilinx/zynqmp.c | 14 ++
> drivers/fpga/Kconfig | 13 ++
> drivers/fpga/Makefile | 1 +
> drivers/fpga/zynqmp-afi.c | 211 ++++++++++++++++++
> include/linux/firmware/xlnx-zynqmp.h | 36 +++
> 8 files changed, 388 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml
> create mode 100644 drivers/fpga/zynqmp-afi.c
>
> --
> 2.25.1
>
Powered by blists - more mailing lists