linux-kernel - [PATCH -next 3/3] clk: sunxi-ng: ccu-sun9i-a80-usb: Use dev_err

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220827094151.3323450-3-yangyingliang@huawei.com>
Date:   Sat, 27 Aug 2022 17:41:51 +0800
From:   Yang Yingliang <yangyingliang@...wei.com>
To:     <linux-kernel@...r.kernel.org>, <linux-sunxi@...ts.linux.dev>,
        <linux-arm-kernel@...ts.infradead.org>, <linux-clk@...r.kernel.org>
CC:     <mturquette@...libre.com>, <sboyd@...nel.org>, <wens@...e.org>,
        <jernej.skrabec@...il.com>
Subject: [PATCH -next 3/3] clk: sunxi-ng: ccu-sun9i-a80-usb: Use dev_err_probe() helper

dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.

Signed-off-by: Yang Yingliang <yangyingliang@...wei.com>
---
 drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c b/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c
index 575ae4ccc65f..a0fb0da8f356 100644
--- a/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c
+++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c
@@ -101,12 +101,9 @@ static int sun9i_a80_usb_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(reg);
 
 	bus_clk = devm_clk_get(&pdev->dev, "bus");
-	if (IS_ERR(bus_clk)) {
-		ret = PTR_ERR(bus_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(bus_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(bus_clk),
+				     "Couldn't get bus clk\n");
 
 	/* The bus clock needs to be enabled for us to access the registers */
 	ret = clk_prepare_enable(bus_clk);
-- 
2.25.1