lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220829154646.29867-2-amelie.delaunay@foss.st.com>
Date:   Mon, 29 Aug 2022 17:46:41 +0200
From:   Amelie Delaunay <amelie.delaunay@...s.st.com>
To:     Jonathan Corbet <corbet@....net>, Vinod Koul <vkoul@...nel.org>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>
CC:     <linux-doc@...r.kernel.org>, <dmaengine@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, Marek Vasut <marex@...x.de>,
        Amelie Delaunay <amelie.delaunay@...s.st.com>
Subject: [RESEND PATCH v3 1/6] dmaengine: stm32-dma: introduce 3 helpers to address channel flags

Channels 0 to 3 flags are described in DMA_LISR and DMA_LIFCR (L as Low).
Channels 4 to 7 flags are described in DMA_HISR and DMA_HIFCR (H as High).
Macro STM32_DMA_ISR(n) returns the interrupt status register offset for the
channel id (n).
Macro STM32_DMA_IFCR(n) returns the interrupt flag clear register offset
for the channel id (n).

If chan->id % 4 = 2 or 3, then its flags are left-shifted by 16 bits.
If chan->id % 4 = 1 or 3, then its flags are additionally left-shifted by 6
bits.
If chan->id % 4 = 0, then its flags are not shifted.
Macro STM32_DMA_FLAGS_SHIFT(n) returns the required shift to get or set the
channel flags mask.

Signed-off-by: Amelie Delaunay <amelie.delaunay@...s.st.com>
---
 drivers/dma/stm32-dma.c | 29 ++++++++++++-----------------
 1 file changed, 12 insertions(+), 17 deletions(-)

diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index adb25a11c70f..5d67e168aaee 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c
@@ -32,8 +32,10 @@
 
 #define STM32_DMA_LISR			0x0000 /* DMA Low Int Status Reg */
 #define STM32_DMA_HISR			0x0004 /* DMA High Int Status Reg */
+#define STM32_DMA_ISR(n)		(((n) & 4) ? STM32_DMA_HISR : STM32_DMA_LISR)
 #define STM32_DMA_LIFCR			0x0008 /* DMA Low Int Flag Clear Reg */
 #define STM32_DMA_HIFCR			0x000c /* DMA High Int Flag Clear Reg */
+#define STM32_DMA_IFCR(n)		(((n) & 4) ? STM32_DMA_HIFCR : STM32_DMA_LIFCR)
 #define STM32_DMA_TCI			BIT(5) /* Transfer Complete Interrupt */
 #define STM32_DMA_HTI			BIT(4) /* Half Transfer Interrupt */
 #define STM32_DMA_TEI			BIT(3) /* Transfer Error Interrupt */
@@ -43,6 +45,12 @@
 					 | STM32_DMA_TEI \
 					 | STM32_DMA_DMEI \
 					 | STM32_DMA_FEI)
+/*
+ * If (chan->id % 4) is 2 or 3, left shift the mask by 16 bits;
+ * if (ch % 4) is 1 or 3, additionally left shift the mask by 6 bits.
+ */
+#define STM32_DMA_FLAGS_SHIFT(n)	({ typeof(n) (_n) = (n); \
+					   (((_n) & 2) << 3) | (((_n) & 1) * 6); })
 
 /* DMA Stream x Configuration Register */
 #define STM32_DMA_SCR(x)		(0x0010 + 0x18 * (x)) /* x = 0..7 */
@@ -401,17 +409,10 @@ static u32 stm32_dma_irq_status(struct stm32_dma_chan *chan)
 	/*
 	 * Read "flags" from DMA_xISR register corresponding to the selected
 	 * DMA channel at the correct bit offset inside that register.
-	 *
-	 * If (ch % 4) is 2 or 3, left shift the mask by 16 bits.
-	 * If (ch % 4) is 1 or 3, additionally left shift the mask by 6 bits.
 	 */
 
-	if (chan->id & 4)
-		dma_isr = stm32_dma_read(dmadev, STM32_DMA_HISR);
-	else
-		dma_isr = stm32_dma_read(dmadev, STM32_DMA_LISR);
-
-	flags = dma_isr >> (((chan->id & 2) << 3) | ((chan->id & 1) * 6));
+	dma_isr = stm32_dma_read(dmadev, STM32_DMA_ISR(chan->id));
+	flags = dma_isr >> STM32_DMA_FLAGS_SHIFT(chan->id);
 
 	return flags & STM32_DMA_MASKI;
 }
@@ -424,17 +425,11 @@ static void stm32_dma_irq_clear(struct stm32_dma_chan *chan, u32 flags)
 	/*
 	 * Write "flags" to the DMA_xIFCR register corresponding to the selected
 	 * DMA channel at the correct bit offset inside that register.
-	 *
-	 * If (ch % 4) is 2 or 3, left shift the mask by 16 bits.
-	 * If (ch % 4) is 1 or 3, additionally left shift the mask by 6 bits.
 	 */
 	flags &= STM32_DMA_MASKI;
-	dma_ifcr = flags << (((chan->id & 2) << 3) | ((chan->id & 1) * 6));
+	dma_ifcr = flags << STM32_DMA_FLAGS_SHIFT(chan->id);
 
-	if (chan->id & 4)
-		stm32_dma_write(dmadev, STM32_DMA_HIFCR, dma_ifcr);
-	else
-		stm32_dma_write(dmadev, STM32_DMA_LIFCR, dma_ifcr);
+	stm32_dma_write(dmadev, STM32_DMA_IFCR(chan->id), dma_ifcr);
 }
 
 static int stm32_dma_disable_chan(struct stm32_dma_chan *chan)
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ