lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220830192212.28570-8-farbere@amazon.com>
Date:   Tue, 30 Aug 2022 19:22:00 +0000
From:   Eliav Farber <farbere@...zon.com>
To:     <jdelvare@...e.com>, <linux@...ck-us.net>, <robh+dt@...nel.org>,
        <p.zabel@...gutronix.de>, <rtanwar@...linear.com>,
        <linux-hwmon@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
CC:     <farbere@...zon.com>, <talel@...zon.com>, <hhhawa@...zon.com>,
        <jonnyc@...zon.com>, <hanochu@...zon.com>, <ronenk@...zon.com>,
        <itamark@...zon.com>, <shellykz@...zon.com>, <shorer@...zon.com>,
        <amitlavi@...zon.com>, <almogbs@...zon.com>, <dkl@...zon.com>,
        <rahul.tanwar@...ux.intel.com>, <andriy.shevchenko@...el.com>
Subject: [PATCH v3 07/19] hwmon: (mr75203) enable polling for all VM channels

Configure ip-polling register to enable polling for all voltage monitor
channels.
This enables reading the voltage values for all inputs other than just
input 0.

Signed-off-by: Eliav Farber <farbere@...zon.com>
---
V3 -> V2:
- Move configuration of ip-polling register from previous patch to a
  separate commit.

 drivers/hwmon/mr75203.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
index 639f5a300170..f561806c400d 100644
--- a/drivers/hwmon/mr75203.c
+++ b/drivers/hwmon/mr75203.c
@@ -388,6 +388,20 @@ static int pvt_init(struct pvt_device *pvt)
 		if (ret)
 			return ret;
 
+		val = GENMASK(pvt->c_num - 1, 0) | VM_CH_INIT |
+		      IP_POLL << SDIF_ADDR_SFT |
+		      SDIF_WRN_W | SDIF_PROG;
+		ret = regmap_write(v_map, SDIF_W, val);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_read_poll_timeout(v_map, SDIF_STAT,
+					       val, !(val & SDIF_BUSY),
+					       PVT_POLL_DELAY_US,
+					       PVT_POLL_TIMEOUT_US);
+		if (ret)
+			return ret;
+
 		val = CFG1_VOL_MEAS_MODE | CFG1_PARALLEL_OUT |
 		      CFG1_14_BIT | IP_CFG << SDIF_ADDR_SFT |
 		      SDIF_WRN_W | SDIF_PROG;
-- 
2.37.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ