Date:   Tue, 30 Aug 2022 14:48:52 -0700
From:   Suren Baghdasaryan <surenb@...gle.com>
To:     akpm@...ux-foundation.org
Cc:     kent.overstreet@...ux.dev, mhocko@...e.com, vbabka@...e.cz,
        hannes@...xchg.org, roman.gushchin@...ux.dev, mgorman@...e.de,
        dave@...olabs.net, willy@...radead.org, liam.howlett@...cle.com,
        void@...ifault.com, peterz@...radead.org, juri.lelli@...hat.com,
        ldufour@...ux.ibm.com, peterx@...hat.com, david@...hat.com,
        axboe@...nel.dk, mcgrof@...nel.org, masahiroy@...nel.org,
        nathan@...nel.org, changbin.du@...el.com, ytcoode@...il.com,
        vincent.guittot@...aro.org, dietmar.eggemann@....com,
        rostedt@...dmis.org, bsegall@...gle.com, bristot@...hat.com,
        vschneid@...hat.com, cl@...ux.com, penberg@...nel.org,
        iamjoonsoo.kim@....com, 42.hyeyoo@...il.com, glider@...gle.com,
        elver@...gle.com, dvyukov@...gle.com, shakeelb@...gle.com,
        songmuchun@...edance.com, arnd@...db.de, jbaron@...mai.com,
        rientjes@...gle.com, minchan@...gle.com, kaleshsingh@...gle.com,
        surenb@...gle.com, kernel-team@...roid.com, linux-mm@...ck.org,
        iommu@...ts.linux.dev, kasan-dev@...glegroups.com,
        io-uring@...r.kernel.org, linux-arch@...r.kernel.org,
        xen-devel@...ts.xenproject.org, linux-bcache@...r.kernel.org,
        linux-modules@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [RFC PATCH 03/30] Lazy percpu counters

From: Kent Overstreet <kent.overstreet@...ux.dev>

This patch adds lib/lazy-percpu-counter.c, which implements counters
that start out as atomics, but lazily switch to percpu mode if the
update rate crosses some threshold (arbitrarily set at 256 per second).

Signed-off-by: Kent Overstreet <kent.overstreet@...ux.dev>
---
 include/linux/lazy-percpu-counter.h |  67 +++++++++++++
 lib/Kconfig                         |   3 +
 lib/Makefile                        |   2 +
 lib/lazy-percpu-counter.c           | 141 ++++++++++++++++++++++++++++
 4 files changed, 213 insertions(+)
 create mode 100644 include/linux/lazy-percpu-counter.h
 create mode 100644 lib/lazy-percpu-counter.c

diff --git a/include/linux/lazy-percpu-counter.h b/include/linux/lazy-percpu-counter.h
new file mode 100644
index 000000000000..a22a2b9a9f32
--- /dev/null
+++ b/include/linux/lazy-percpu-counter.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Lazy percpu counters:
+ * (C) 2022 Kent Overstreet
+ *
+ * Lazy percpu counters start out in atomic mode, then switch to percpu mode if
+ * the update rate crosses some threshold.
+ *
+ * This means we don't have to decide between low memory overhead atomic
+ * counters and higher performance percpu counters - we can have our cake and
+ * eat it, too!
+ *
+ * Internally we use an atomic64_t, where the low bit indicates whether we're in
+ * percpu mode, and the high 8 bits are a secondary counter that's incremented
+ * when the counter is modified - meaning 55 bits of precision are available for
+ * the counter itself.
+ *
+ * lazy_percpu_counter is 16 bytes (on 64 bit machines), raw_lazy_percpu_counter
+ * is 8 bytes but requires a separate unsigned long to record when the counter
+ * wraps - because sometimes multiple counters are used together and can share
+ * the same timestamp.
+ */
+
+#ifndef _LINUX_LAZY_PERCPU_COUNTER_H
+#define _LINUX_LAZY_PERCPU_COUNTER_H
+
+struct raw_lazy_percpu_counter {
+	atomic64_t			v;
+};
+
+void __lazy_percpu_counter_exit(struct raw_lazy_percpu_counter *c);
+void __lazy_percpu_counter_add(struct raw_lazy_percpu_counter *c,
+			       unsigned long *last_wrap, s64 i);
+s64 __lazy_percpu_counter_read(struct raw_lazy_percpu_counter *c);
+
+static inline void __lazy_percpu_counter_sub(struct raw_lazy_percpu_counter *c,
+					     unsigned long *last_wrap, s64 i)
+{
+	__lazy_percpu_counter_add(c, last_wrap, -i);
+}
+
+struct lazy_percpu_counter {
+	struct raw_lazy_percpu_counter	v;
+	unsigned long			last_wrap;
+};
+
+static inline void lazy_percpu_counter_exit(struct lazy_percpu_counter *c)
+{
+	__lazy_percpu_counter_exit(&c->v);
+}
+
+static inline void lazy_percpu_counter_add(struct lazy_percpu_counter *c, s64 i)
+{
+	__lazy_percpu_counter_add(&c->v, &c->last_wrap, i);
+}
+
+static inline void lazy_percpu_counter_sub(struct lazy_percpu_counter *c, s64 i)
+{
+	__lazy_percpu_counter_sub(&c->v, &c->last_wrap, i);
+}
+
+static inline s64 lazy_percpu_counter_read(struct lazy_percpu_counter *c)
+{
+	return __lazy_percpu_counter_read(&c->v);
+}
+
+#endif /* _LINUX_LAZY_PERCPU_COUNTER_H */
diff --git a/lib/Kconfig b/lib/Kconfig
index dc1ab2ed1dc6..fc6dbc425728 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -498,6 +498,9 @@ config ASSOCIATIVE_ARRAY
 
 	  for more information.
 
+config LAZY_PERCPU_COUNTER
+	bool
+
 config HAS_IOMEM
 	bool
 	depends on !NO_IOMEM
diff --git a/lib/Makefile b/lib/Makefile
index ffabc30a27d4..cc7762748708 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -163,6 +163,8 @@ obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o
 obj-$(CONFIG_DEBUG_LIST) += list_debug.o
 obj-$(CONFIG_DEBUG_OBJECTS) += debugobjects.o
 
+obj-$(CONFIG_LAZY_PERCPU_COUNTER) += lazy-percpu-counter.o
+
 obj-$(CONFIG_BITREVERSE) += bitrev.o
 obj-$(CONFIG_LINEAR_RANGES) += linear_ranges.o
 obj-$(CONFIG_PACKING)	+= packing.o
diff --git a/lib/lazy-percpu-counter.c b/lib/lazy-percpu-counter.c
new file mode 100644
index 000000000000..299ef36137ee
--- /dev/null
+++ b/lib/lazy-percpu-counter.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/atomic.h>
+#include <linux/gfp.h>
+#include <linux/jiffies.h>
+#include <linux/lazy-percpu-counter.h>
+#include <linux/percpu.h>
+
+/*
+ * We use the high bits of the atomic counter for a secondary counter, which is
+ * incremented every time the counter is touched. When the secondary counter
+ * wraps, we check the time the counter last wrapped, and if it was recent
+ * enough that means the update frequency has crossed our threshold and we
+ * switch to percpu mode:
+ */
+#define COUNTER_MOD_BITS		8
+#define COUNTER_MOD_MASK		~(~0ULL >> COUNTER_MOD_BITS)
+#define COUNTER_MOD_BITS_START		(64 - COUNTER_MOD_BITS)
+
+/*
+ * We use the low bit of the counter to indicate whether we're in atomic mode
+ * (low bit clear), or percpu mode (low bit set, counter is a pointer to actual
+ * percpu counters:
+ */
+#define COUNTER_IS_PCPU_BIT		1
+
+static inline u64 __percpu *lazy_percpu_counter_is_pcpu(u64 v)
+{
+	if (!(v & COUNTER_IS_PCPU_BIT))
+		return NULL;
+
+	v ^= COUNTER_IS_PCPU_BIT;
+	return (u64 __percpu *)(unsigned long)v;
+}
+
+static inline s64 lazy_percpu_counter_atomic_val(s64 v)
+{
+	/* Ensure output is sign extended properly: */
+	return (v << COUNTER_MOD_BITS) >>
+		(COUNTER_MOD_BITS + COUNTER_IS_PCPU_BIT);
+}
+
+static void lazy_percpu_counter_switch_to_pcpu(struct raw_lazy_percpu_counter *c)
+{
+	u64 __percpu *pcpu_v = alloc_percpu_gfp(u64, GFP_ATOMIC|__GFP_NOWARN);
+	u64 old, new, v;
+
+	if (!pcpu_v)
+		return;
+
+	preempt_disable();
+	v = atomic64_read(&c->v);
+	do {
+		if (lazy_percpu_counter_is_pcpu(v)) {
+			free_percpu(pcpu_v);
+			return;
+		}
+
+		old = v;
+		new = (unsigned long)pcpu_v | 1;
+
+		*this_cpu_ptr(pcpu_v) = lazy_percpu_counter_atomic_val(v);
+	} while ((v = atomic64_cmpxchg(&c->v, old, new)) != old);
+	preempt_enable();
+}
+
+/**
+ * __lazy_percpu_counter_exit: Free resources associated with a
+ * raw_lazy_percpu_counter
+ *
+ * @c: counter to exit
+ */
+void __lazy_percpu_counter_exit(struct raw_lazy_percpu_counter *c)
+{
+	free_percpu(lazy_percpu_counter_is_pcpu(atomic64_read(&c->v)));
+}
+EXPORT_SYMBOL_GPL(__lazy_percpu_counter_exit);
+
+/**
+ * __lazy_percpu_counter_read: Read current value of a raw_lazy_percpu_counter
+ *
+ * @c: counter to read
+ */
+s64 __lazy_percpu_counter_read(struct raw_lazy_percpu_counter *c)
+{
+	s64 v = atomic64_read(&c->v);
+	u64 __percpu *pcpu_v = lazy_percpu_counter_is_pcpu(v);
+
+	if (pcpu_v) {
+		int cpu;
+
+		v = 0;
+		for_each_possible_cpu(cpu)
+			v += *per_cpu_ptr(pcpu_v, cpu);
+	} else {
+		v = lazy_percpu_counter_atomic_val(v);
+	}
+
+	return v;
+}
+EXPORT_SYMBOL_GPL(__lazy_percpu_counter_read);
+
+/**
+ * __lazy_percpu_counter_add: Add a value to a lazy_percpu_counter
+ *
+ * @c: counter to modify
+ * @last_wrap: pointer to a timestamp, updated when mod counter wraps
+ * @i: value to add
+ */
+void __lazy_percpu_counter_add(struct raw_lazy_percpu_counter *c,
+			       unsigned long *last_wrap, s64 i)
+{
+	u64 atomic_i;
+	u64 old, v = atomic64_read(&c->v);
+	u64 __percpu *pcpu_v;
+
+	atomic_i  = i << COUNTER_IS_PCPU_BIT;
+	atomic_i &= ~COUNTER_MOD_MASK;
+	atomic_i |= 1ULL << COUNTER_MOD_BITS_START;
+
+	do {
+		pcpu_v = lazy_percpu_counter_is_pcpu(v);
+		if (pcpu_v) {
+			this_cpu_add(*pcpu_v, i);
+			return;
+		}
+
+		old = v;
+	} while ((v = atomic64_cmpxchg(&c->v, old, old + atomic_i)) != old);
+
+	if (unlikely(!(v & COUNTER_MOD_MASK))) {
+		unsigned long now = jiffies;
+
+		if (*last_wrap &&
+		    unlikely(time_after(*last_wrap + HZ, now)))
+			lazy_percpu_counter_switch_to_pcpu(c);
+		else
+			*last_wrap = now;
+	}
+}
+EXPORT_SYMBOL(__lazy_percpu_counter_add);
-- 
2.37.2.672.g94769d06f0-goog

Powered by blists - more mailing lists