linux-kernel - Re: [PATCH v9 2/2] dt-bindings: fpga: document Lattice sysCONFIG FPGA manager

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220830103201.dmtvotiq43g742v5@h-e2.ddg>
Date:   Tue, 30 Aug 2022 13:32:01 +0300
From:   Ivan Bornyakov <i.bornyakov@...rotek.ru>
To:     mdf@...nel.org, hao.wu@...el.com, yilun.xu@...el.com,
        trix@...hat.com, dg@...ix.com, j.zink@...gutronix.de,
        robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org
Cc:     linux-fpga@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, kernel@...gutronix.de,
        system@...rotek.ru
Subject: Re: [PATCH v9 2/2] dt-bindings: fpga: document Lattice sysCONFIG
 FPGA manager

On Tue, Aug 30, 2022 at 12:54:05PM +0300, Ivan Bornyakov wrote:
> Add Device Tree Binding doc for configuring Lattice ECP5 and MachXO2
> FPGAs over Slave SPI sysCONFIG interface.
> 
> Signed-off-by: Ivan Bornyakov <i.bornyakov@...rotek.ru>
> ---
>  .../bindings/fpga/lattice,sysconfig.yaml      | 102 ++++++++++++++++++
>  1 file changed, 102 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml
> 
> diff --git a/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml
> new file mode 100644
> index 000000000000..17f1e0c50bc4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml
> @@ -0,0 +1,102 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/fpga/lattice,sysconfig.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Lattice Slave SPI sysCONFIG FPGA manager
> +
> +maintainers:
> +  - Ivan Bornyakov <i.bornyakov@...rotek.ru>
> +
> +description: |
> +  Lattice sysCONFIG port, which is used for FPGA configuration, among others,
> +  have Slave Serial Peripheral Interface. Only full reconfiguration is
> +  supported.
> +
> +  Programming of ECP5 is done by writing uncompressed bitstream image in .bit
> +  format into FPGA's SRAM configuration memory.
> +
> +  Programming of MachXO2 is done by writing configuration data into device's
> +  internal non-volatile Flash memory, then Self-Download of data from Flash
> +  into SRAM is issued.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - lattice,ecp5-fpga-mgr
> +      - lattice,machxo2-fpga-mgr
> +
> +  reg:
> +    maxItems: 1
> +
> +  program-gpios:
> +    description:
> +      A GPIO line connected to PROGRAMN (active low) pin of the device.
> +      Initiates configuration sequence.
> +    maxItems: 1
> +
> +  init-gpios:
> +    description:
> +      A GPIO line connected to INITN (active low) pin of the device.
> +      Indicates that the FPGA is ready to be configured.
> +    maxItems: 1
> +
> +  done-gpios:
> +    description:
> +      A GPIO line connected to DONE (active high) pin of the device.
> +      Indicates that the configuration sequence is complete.
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: lattice,machxo2-fpga-mgr
> +    then:
> +      properties:
> +        spi-max-frequency:
> +          maximum: 66000000
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: lattice,ecp5-fpga-mgr
> +    then:
> +      properties:
> +        spi-max-frequency:
> +          maximum: 60000000
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    spi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        fpga-mgr@0 {
> +            compatible = "lattice,ecp5-fpga-mgr";
> +            reg = <0>;
> +            spi-max-frequency = <20000000>;
> +            program-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
> +            init-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
> +            done-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
> +        };
> +
> +        fpga-mgr@1 {
> +            compatible = "lattice,machxo2-fpga-mgr";
> +            reg = <1>;
> +            spi-max-frequency = <20000000>;
> +        };
> +    };
> -- 
> 2.37.2
> 

Sorry, I forgot to add a tag from Krzysztof. Since there is not much
change here, I think the tag is still valid.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>