linux-kernel - Re: [RESEND PATCH v6 03/10] spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220831173955.C333CC433D7@smtp.kernel.org>
Date:   Wed, 31 Aug 2022 10:39:53 -0700
From:   Stephen Boyd <sboyd@...nel.org>
To:     Abhijeet Dharmapurikar <adharmap@...eaurora.org>,
        Fenglin Wu <quic_fenglinw@...cinc.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Kiran Gunda <kgunda@...eaurora.org>,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     quic_collinsd@...cinc.com, quic_subbaram@...cinc.com,
        quic_fenglinw@...cinc.com, tglx@...utronix.de, maz@...nel.org,
        Subbaraman Narayanamurthy <subbaram@...eaurora.org>,
        David Collins <collinsd@...eaurora.org>
Subject: Re: [RESEND PATCH v6 03/10] spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq

Quoting Fenglin Wu (2022-06-11 20:24:39)
> From: Subbaraman Narayanamurthy <subbaram@...eaurora.org>
> 
> Currently, cleanup_irq() is invoked when a peripheral's interrupt
> fires and there is no mapping present in the interrupt domain of
> spmi interrupt controller.
> 
> The cleanup_irq clears the arbiter bit, clears the pmic interrupt
> and disables it at the pmic in that order. The last disable in
> cleanup_irq races with request_irq() in that it stomps over the
> enable issued by request_irq. Fix this by not writing to the pmic
> in cleanup_irq. The latched bit will be left set in the pmic,
> which will not send us more interrupts even if the enable bit
> stays enabled.
> 
> When a client wants to request an interrupt, use the activate
> callback on the irq_domain to clear latched bit. This ensures
> that the latched, if set due to the above changes in cleanup_irq
> or when the bootloader leaves it set, gets cleaned up, paving way
> for upcoming interrupts to trigger.
> 
> With this, there is a possibility of unwanted triggering of
> interrupt right after the latched bit is cleared - the interrupt
> may be left enabled too. To avoid that, clear the enable first
> followed by clearing the latched bit in the activate callback.
> 
> Fixes: 6bc546e71e50 ("spmi: pmic-arb: cleanup unrequested irqs")
> Fixes: 02abec3616c1 ("spmi: pmic-arb: rename pa_xx to pmic_arb_xx and other cleanup")
> Signed-off-by: Subbaraman Narayanamurthy <subbaram@...eaurora.org>
> [collinsd@...eaurora.org: fix merge conflict]
> Signed-off-by: David Collins <collinsd@...eaurora.org>
> Signed-off-by: Fenglin Wu <quic_fenglinw@...cinc.com>
> ---

Applied to spmi-next